2025-03-28 03:12:52.493872 | Job console starting... 2025-03-28 03:12:52.501185 | Updating repositories 2025-03-28 03:12:52.551725 | Preparing job workspace 2025-03-28 03:12:54.126782 | Running Ansible setup... 2025-03-28 03:12:59.989730 | PRE-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/pre.yaml@main] 2025-03-28 03:13:00.849397 | 2025-03-28 03:13:00.849551 | PLAY [Base pre] 2025-03-28 03:13:00.911762 | 2025-03-28 03:13:00.911895 | TASK [Setup log path fact] 2025-03-28 03:13:00.963252 | ubuntu-noble | ok 2025-03-28 03:13:01.002688 | 2025-03-28 03:13:01.002818 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-03-28 03:13:01.054667 | ubuntu-noble | ok 2025-03-28 03:13:01.077863 | 2025-03-28 03:13:01.077971 | TASK [emit-job-header : Print job information] 2025-03-28 03:13:01.169221 | # Job Information 2025-03-28 03:13:01.169379 | Ansible Version: 2.15.3 2025-03-28 03:13:01.169413 | Job: container-image-cfg-cookiecutter-push 2025-03-28 03:13:01.169441 | Pipeline: periodic-daily 2025-03-28 03:13:01.169462 | Executor: 7d211f194f6a 2025-03-28 03:13:01.169479 | Triggered by: https://github.com/osism/cfg-cookiecutter 2025-03-28 03:13:01.169498 | Event ID: be17390e80ce4bc194e277124c5c2280 2025-03-28 03:13:01.187798 | 2025-03-28 03:13:01.187903 | LOOP [emit-job-header : Print node information] 2025-03-28 03:13:01.395729 | ubuntu-noble | ok: 2025-03-28 03:13:01.399487 | ubuntu-noble | # Node Information 2025-03-28 03:13:01.399564 | ubuntu-noble | Inventory Hostname: ubuntu-noble 2025-03-28 03:13:01.399593 | ubuntu-noble | Hostname: ubuntu 2025-03-28 03:13:01.399617 | ubuntu-noble | Username: zuul 2025-03-28 03:13:01.399638 | ubuntu-noble | Distro: Ubuntu 24.04 2025-03-28 03:13:01.399662 | ubuntu-noble | Provider: regiocloud-a 2025-03-28 03:13:01.399683 | ubuntu-noble | Label: ubuntu-noble 2025-03-28 03:13:01.399704 | ubuntu-noble | Product Name: OpenStack Nova 2025-03-28 03:13:01.399724 | ubuntu-noble | Interface IP: 81.163.192.160 2025-03-28 03:13:01.419525 | 2025-03-28 03:13:01.419629 | TASK [log-inventory : Ensure Zuul Ansible directory exists] 2025-03-28 03:13:01.880689 | ubuntu-noble -> localhost | changed 2025-03-28 03:13:01.888870 | 2025-03-28 03:13:01.888971 | TASK [log-inventory : Copy ansible inventory to logs dir] 2025-03-28 03:13:03.199559 | ubuntu-noble -> localhost | changed 2025-03-28 03:13:03.236336 | 2025-03-28 03:13:03.236724 | TASK [add-build-sshkey : Check to see if ssh key was already created for this build] 2025-03-28 03:13:03.777355 | ubuntu-noble -> localhost | ok 2025-03-28 03:13:03.803224 | 2025-03-28 03:13:03.804953 | TASK [add-build-sshkey : Create a new key in workspace based on build UUID] 2025-03-28 03:13:03.892410 | ubuntu-noble | ok 2025-03-28 03:13:04.004566 | ubuntu-noble | included: /var/lib/zuul/builds/f1717540a99345f19d3cc41b15f24ba9/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/create-key-and-replace.yaml 2025-03-28 03:13:04.013794 | 2025-03-28 03:13:04.013960 | TASK [add-build-sshkey : Create Temp SSH key] 2025-03-28 03:13:05.582059 | ubuntu-noble -> localhost | Generating public/private rsa key pair. 2025-03-28 03:13:05.582232 | ubuntu-noble -> localhost | Your identification has been saved in /var/lib/zuul/builds/f1717540a99345f19d3cc41b15f24ba9/work/f1717540a99345f19d3cc41b15f24ba9_id_rsa 2025-03-28 03:13:05.582262 | ubuntu-noble -> localhost | Your public key has been saved in /var/lib/zuul/builds/f1717540a99345f19d3cc41b15f24ba9/work/f1717540a99345f19d3cc41b15f24ba9_id_rsa.pub 2025-03-28 03:13:05.582283 | ubuntu-noble -> localhost | The key fingerprint is: 2025-03-28 03:13:05.582357 | ubuntu-noble -> localhost | SHA256:ztXRl84+JiQI3urAQZon/GV0VAU+/9gElqd1yIpqZt4 zuul-build-sshkey 2025-03-28 03:13:05.582376 | ubuntu-noble -> localhost | The key's randomart image is: 2025-03-28 03:13:05.582393 | ubuntu-noble -> localhost | +---[RSA 3072]----+ 2025-03-28 03:13:05.582410 | ubuntu-noble -> localhost | | ..oo. | 2025-03-28 03:13:05.582427 | ubuntu-noble -> localhost | | . . o...| 2025-03-28 03:13:05.582443 | ubuntu-noble -> localhost | | . o . o.+++o| 2025-03-28 03:13:05.582466 | ubuntu-noble -> localhost | | . + o + .o+oB..| 2025-03-28 03:13:05.582483 | ubuntu-noble -> localhost | | = o +Soo.o+ + | 2025-03-28 03:13:05.582499 | ubuntu-noble -> localhost | | = +o.o o * | 2025-03-28 03:13:05.582518 | ubuntu-noble -> localhost | | + .B o * | 2025-03-28 03:13:05.582535 | ubuntu-noble -> localhost | | o= . o .| 2025-03-28 03:13:05.582551 | ubuntu-noble -> localhost | | .. E | 2025-03-28 03:13:05.582568 | ubuntu-noble -> localhost | +----[SHA256]-----+ 2025-03-28 03:13:05.582609 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.736359 2025-03-28 03:13:05.589063 | 2025-03-28 03:13:05.589142 | TASK [add-build-sshkey : Remote setup ssh keys (linux)] 2025-03-28 03:13:05.629055 | ubuntu-noble | ok 2025-03-28 03:13:05.645706 | ubuntu-noble | included: /var/lib/zuul/builds/f1717540a99345f19d3cc41b15f24ba9/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/remote-linux.yaml 2025-03-28 03:13:05.664908 | 2025-03-28 03:13:05.664991 | TASK [add-build-sshkey : Remove previously added zuul-build-sshkey] 2025-03-28 03:13:05.743269 | ubuntu-noble | skipping: Conditional result was False 2025-03-28 03:13:05.750470 | 2025-03-28 03:13:05.750566 | TASK [add-build-sshkey : Enable access via build key on all nodes] 2025-03-28 03:13:06.814835 | ubuntu-noble | changed 2025-03-28 03:13:06.824806 | 2025-03-28 03:13:06.824969 | TASK [add-build-sshkey : Make sure user has a .ssh] 2025-03-28 03:13:07.155986 | ubuntu-noble | ok 2025-03-28 03:13:07.166052 | 2025-03-28 03:13:07.166151 | TASK [add-build-sshkey : Install build private key as SSH key on all nodes] 2025-03-28 03:13:08.117140 | ubuntu-noble | changed 2025-03-28 03:13:08.124976 | 2025-03-28 03:13:08.125077 | TASK [add-build-sshkey : Install build public key as SSH key on all nodes] 2025-03-28 03:13:08.911512 | ubuntu-noble | changed 2025-03-28 03:13:08.918558 | 2025-03-28 03:13:08.918657 | TASK [add-build-sshkey : Remote setup ssh keys (windows)] 2025-03-28 03:13:08.985144 | ubuntu-noble | skipping: Conditional result was False 2025-03-28 03:13:08.992816 | 2025-03-28 03:13:08.992907 | TASK [remove-zuul-sshkey : Remove master key from local agent] 2025-03-28 03:13:09.919265 | ubuntu-noble -> localhost | changed 2025-03-28 03:13:09.936281 | 2025-03-28 03:13:09.936423 | TASK [add-build-sshkey : Add back temp key] 2025-03-28 03:13:10.731234 | ubuntu-noble -> localhost | Identity added: /var/lib/zuul/builds/f1717540a99345f19d3cc41b15f24ba9/work/f1717540a99345f19d3cc41b15f24ba9_id_rsa (zuul-build-sshkey) 2025-03-28 03:13:10.732846 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.010849 2025-03-28 03:13:10.783893 | 2025-03-28 03:13:10.784003 | TASK [add-build-sshkey : Verify we can still SSH to all nodes] 2025-03-28 03:13:11.288123 | ubuntu-noble | ok 2025-03-28 03:13:11.297687 | 2025-03-28 03:13:11.297777 | TASK [add-build-sshkey : Verify we can still SSH to all nodes (windows)] 2025-03-28 03:13:11.333269 | ubuntu-noble | skipping: Conditional result was False 2025-03-28 03:13:11.347784 | 2025-03-28 03:13:11.347864 | TASK [start-zuul-console : Start zuul_console daemon.] 2025-03-28 03:13:11.819902 | ubuntu-noble | ok 2025-03-28 03:13:11.844590 | 2025-03-28 03:13:11.844860 | TASK [validate-host : Define zuul_info_dir fact] 2025-03-28 03:13:11.875035 | ubuntu-noble | ok 2025-03-28 03:13:11.881075 | 2025-03-28 03:13:11.881158 | TASK [validate-host : Ensure Zuul Ansible directory exists] 2025-03-28 03:13:12.161383 | ubuntu-noble -> localhost | ok 2025-03-28 03:13:12.168624 | 2025-03-28 03:13:12.168709 | TASK [validate-host : Collect information about the host] 2025-03-28 03:13:13.311331 | ubuntu-noble | ok 2025-03-28 03:13:13.330989 | 2025-03-28 03:13:13.331198 | TASK [validate-host : Sanitize hostname] 2025-03-28 03:13:13.396335 | ubuntu-noble | ok 2025-03-28 03:13:13.408536 | 2025-03-28 03:13:13.408643 | TASK [validate-host : Write out all ansible variables/facts known for each host] 2025-03-28 03:13:14.018194 | ubuntu-noble -> localhost | changed 2025-03-28 03:13:14.023721 | 2025-03-28 03:13:14.023799 | TASK [validate-host : Collect information about zuul worker] 2025-03-28 03:13:14.527614 | ubuntu-noble | ok 2025-03-28 03:13:14.536077 | 2025-03-28 03:13:14.536169 | TASK [validate-host : Write out all zuul information for each host] 2025-03-28 03:13:15.227405 | ubuntu-noble -> localhost | changed 2025-03-28 03:13:15.242539 | 2025-03-28 03:13:15.244486 | TASK [prepare-workspace-log : Start zuul_console daemon.] 2025-03-28 03:13:15.642018 | ubuntu-noble | ok 2025-03-28 03:13:15.651975 | 2025-03-28 03:13:15.652063 | TASK [prepare-workspace-log : Synchronize src repos to workspace directory.] 2025-03-28 03:13:16.552889 | ubuntu-noble | changed: 2025-03-28 03:13:16.553080 | ubuntu-noble | cd+++++++++ src/ 2025-03-28 03:13:16.553117 | ubuntu-noble | cd+++++++++ src/github.com/ 2025-03-28 03:13:16.553141 | ubuntu-noble | cd+++++++++ src/github.com/osism/ 2025-03-28 03:13:16.553162 | ubuntu-noble | cd+++++++++ src/github.com/osism/cfg-cookiecutter/ 2025-03-28 03:13:16.553182 | ubuntu-noble | Containerfile 2025-03-28 03:13:16.553346 | ubuntu-noble | 3.4.7-r0) 2025-03-28 03:14:28.266604 | ubuntu-noble | #7 5.799 (22/37) Installing libxml2 (2.13.4-r5) 2025-03-28 03:14:28.266609 | ubuntu-noble | #7 5.838 (23/37) Installing llvm19-libs (19.1.4-r1) 2025-03-28 03:14:28.266625 | ubuntu-noble | #7 7.698 (24/37) Installing scudo-malloc (19.1.4-r0) 2025-03-28 03:14:28.432732 | ubuntu-noble | #7 7.713 (25/37) Installing rust (1.83.0-r0) 2025-03-28 03:14:31.722349 | ubuntu-noble | #7 11.15 (26/37) Installing cargo (1.83.0-r0) 2025-03-28 03:14:32.095975 | ubuntu-noble | #7 11.53 (27/37) Installing linux-headers (6.6-r1) 2025-03-28 03:14:32.254174 | ubuntu-noble | #7 11.69 (28/37) Installing pkgconf (2.3.0-r0) 2025-03-28 03:14:32.502119 | ubuntu-noble | #7 11.70 (29/37) Installing libffi-dev (3.4.7-r0) 2025-03-28 03:14:32.713011 | ubuntu-noble | #7 11.72 (30/37) Installing openssl-dev (3.3.3-r0) 2025-03-28 03:14:32.713118 | ubuntu-noble | #7 11.76 (31/37) Installing mpdecimal (4.0.0-r0) 2025-03-28 03:14:32.713127 | ubuntu-noble | #7 11.78 (32/37) Installing python3 (3.12.9-r0) 2025-03-28 03:14:32.713169 | ubuntu-noble | #7 12.14 (33/37) Installing python3-pycache-pyc0 (3.12.9-r0) 2025-03-28 03:14:32.910330 | ubuntu-noble | #7 12.34 (34/37) Installing pyc (3.12.9-r0) 2025-03-28 03:14:34.466366 | ubuntu-noble | #7 12.34 (35/37) Installing python3-pyc (3.12.9-r0) 2025-03-28 03:14:34.466439 | ubuntu-noble | #7 12.34 (36/37) Installing python3-dev (3.12.9-r0) 2025-03-28 03:14:34.466459 | ubuntu-noble | #7 13.90 (37/37) Installing .build-deps (20250328.031423) 2025-03-28 03:14:34.630003 | ubuntu-noble | #7 13.90 Executing busybox-1.37.0-r12.trigger 2025-03-28 03:14:39.368401 | ubuntu-noble | #7 13.91 OK: 760 MiB in 88 packages 2025-03-28 03:14:39.369979 | ubuntu-noble | #7 18.80 Collecting pip==25.0.1 2025-03-28 03:14:39.545180 | ubuntu-noble | #7 18.87 Downloading pip-25.0.1-py3-none-any.whl.metadata (3.7 kB) 2025-03-28 03:14:39.690017 | ubuntu-noble | #7 18.89 Downloading pip-25.0.1-py3-none-any.whl (1.8 MB) 2025-03-28 03:14:39.690103 | ubuntu-noble | #7 18.98 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.8/1.8 MB 36.0 MB/s eta 0:00:00 2025-03-28 03:14:39.920464 | ubuntu-noble | #7 19.03 Installing collected packages: pip 2025-03-28 03:14:39.920574 | ubuntu-noble | #7 19.04 Attempting uninstall: pip 2025-03-28 03:14:39.920683 | ubuntu-noble | #7 19.04 Found existing installation: pip 24.3.1 2025-03-28 03:14:39.920695 | ubuntu-noble | #7 19.12 Uninstalling pip-24.3.1: 2025-03-28 03:14:39.920717 | ubuntu-noble | #7 19.35 Successfully uninstalled pip-24.3.1 2025-03-28 03:14:42.085046 | ubuntu-noble | #7 21.52 Successfully installed pip-25.0.1 2025-03-28 03:14:42.235791 | ubuntu-noble | #7 21.52 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable.It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning. 2025-03-28 03:14:43.323002 | ubuntu-noble | #7 22.75 Collecting PyYAML==6.0.2 (from -r /tmp/requirements.txt (line 1)) 2025-03-28 03:14:43.477912 | ubuntu-noble | #7 22.83 Downloading PyYAML-6.0.2-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (2.1 kB) 2025-03-28 03:14:43.580865 | ubuntu-noble | #7 22.91 Collecting ansible==11.4.0 (from -r /tmp/requirements.txt (line 2)) 2025-03-28 03:14:43.581010 | ubuntu-noble | #7 22.92 Downloading ansible-11.4.0-py3-none-any.whl.metadata (8.1 kB) 2025-03-28 03:14:43.745841 | ubuntu-noble | #7 22.96 Collecting click==8.1.8 (from -r /tmp/requirements.txt (line 3)) 2025-03-28 03:14:43.746003 | ubuntu-noble | #7 22.98 Downloading click-8.1.8-py3-none-any.whl.metadata (2.3 kB) 2025-03-28 03:14:43.746019 | ubuntu-noble | #7 23.01 Collecting cookiecutter==2.6.0 (from -r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:43.746047 | ubuntu-noble | #7 23.03 Downloading cookiecutter-2.6.0-py3-none-any.whl.metadata (7.3 kB) 2025-03-28 03:14:43.886399 | ubuntu-noble | #7 23.32 Collecting cryptography==44.0.2 (from -r /tmp/requirements.txt (line 5)) 2025-03-28 03:14:44.055299 | ubuntu-noble | #7 23.33 Downloading cryptography-44.0.2-cp39-abi3-musllinux_1_2_x86_64.whl.metadata (5.7 kB) 2025-03-28 03:14:44.156542 | ubuntu-noble | #7 23.39 Collecting loguru==0.7.3 (from -r /tmp/requirements.txt (line 6)) 2025-03-28 03:14:44.156671 | ubuntu-noble | #7 23.40 Downloading loguru-0.7.3-py3-none-any.whl.metadata (22 kB) 2025-03-28 03:14:44.156680 | ubuntu-noble | #7 23.49 Collecting oslo.utils==8.2.0 (from -r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:44.156697 | ubuntu-noble | #7 23.50 Downloading oslo.utils-8.2.0-py3-none-any.whl.metadata (2.2 kB) 2025-03-28 03:14:44.259434 | ubuntu-noble | #7 23.57 Collecting paramiko==3.5.1 (from -r /tmp/requirements.txt (line 8)) 2025-03-28 03:14:44.259532 | ubuntu-noble | #7 23.59 Downloading paramiko-3.5.1-py3-none-any.whl.metadata (4.6 kB) 2025-03-28 03:14:44.259551 | ubuntu-noble | #7 23.62 Collecting passlib==1.7.4 (from -r /tmp/requirements.txt (line 9)) 2025-03-28 03:14:44.428286 | ubuntu-noble | #7 23.63 Downloading passlib-1.7.4-py2.py3-none-any.whl.metadata (1.7 kB) 2025-03-28 03:14:44.428365 | ubuntu-noble | #7 23.67 Collecting pwgen==0.8.2.post0 (from -r /tmp/requirements.txt (line 10)) 2025-03-28 03:14:44.428376 | ubuntu-noble | #7 23.69 Downloading pwgen-0.8.2.post0.tar.gz (2.9 kB) 2025-03-28 03:14:44.428396 | ubuntu-noble | #7 23.71 Installing build dependencies: started 2025-03-28 03:14:47.925943 | ubuntu-noble | #7 27.36 Installing build dependencies: finished with status 'done' 2025-03-28 03:14:48.077976 | ubuntu-noble | #7 27.36 Getting requirements to build wheel: started 2025-03-28 03:14:48.431759 | ubuntu-noble | #7 27.86 Getting requirements to build wheel: finished with status 'done' 2025-03-28 03:14:48.584971 | ubuntu-noble | #7 27.87 Preparing metadata (pyproject.toml): started 2025-03-28 03:14:48.858929 | ubuntu-noble | #7 28.29 Preparing metadata (pyproject.toml): finished with status 'done' 2025-03-28 03:14:49.090683 | ubuntu-noble | #7 28.52 Collecting pycryptodome==3.22.0 (from -r /tmp/requirements.txt (line 11)) 2025-03-28 03:14:49.191685 | ubuntu-noble | #7 28.54 Downloading pycryptodome-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB) 2025-03-28 03:14:49.358923 | ubuntu-noble | #7 28.57 Collecting pykeepass==4.1.1.post1 (from -r /tmp/requirements.txt (line 12)) 2025-03-28 03:14:49.359028 | ubuntu-noble | #7 28.59 Downloading pykeepass-4.1.1.post1-py3-none-any.whl.metadata (6.6 kB) 2025-03-28 03:14:49.359041 | ubuntu-noble | #7 28.62 Collecting python-gilt==1.2.3 (from -r /tmp/requirements.txt (line 13)) 2025-03-28 03:14:49.359058 | ubuntu-noble | #7 28.64 Downloading python_gilt-1.2.3-py2.py3-none-any.whl.metadata (1.4 kB) 2025-03-28 03:14:49.449346 | ubuntu-noble | #7 28.88 Collecting ruamel.yaml==0.18.10 (from -r /tmp/requirements.txt (line 14)) 2025-03-28 03:14:49.616826 | ubuntu-noble | #7 28.90 Downloading ruamel.yaml-0.18.10-py3-none-any.whl.metadata (23 kB) 2025-03-28 03:14:49.724286 | ubuntu-noble | #7 28.94 Collecting yamllint==1.37.0 (from -r /tmp/requirements.txt (line 15)) 2025-03-28 03:14:49.724354 | ubuntu-noble | #7 28.96 Downloading yamllint-1.37.0-py3-none-any.whl.metadata (4.3 kB) 2025-03-28 03:14:49.724361 | ubuntu-noble | #7 29.05 Collecting ansible-core~=2.18.4 (from ansible==11.4.0->-r /tmp/requirements.txt (line 2)) 2025-03-28 03:14:49.724376 | ubuntu-noble | #7 29.06 Downloading ansible_core-2.18.4-py3-none-any.whl.metadata (7.7 kB) 2025-03-28 03:14:49.853143 | ubuntu-noble | #7 29.10 Collecting binaryornot>=0.4.4 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:49.853249 | ubuntu-noble | #7 29.11 Downloading binaryornot-0.4.4-py2.py3-none-any.whl.metadata (6.0 kB) 2025-03-28 03:14:49.853258 | ubuntu-noble | #7 29.16 Collecting Jinja2<4.0.0,>=2.7 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:49.853275 | ubuntu-noble | #7 29.17 Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB) 2025-03-28 03:14:50.025988 | ubuntu-noble | #7 29.21 Collecting python-slugify>=4.0.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:50.026141 | ubuntu-noble | #7 29.23 Downloading python_slugify-8.0.4-py2.py3-none-any.whl.metadata (8.5 kB) 2025-03-28 03:14:50.026173 | ubuntu-noble | #7 29.28 Collecting requests>=2.23.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:50.026246 | ubuntu-noble | #7 29.30 Downloading requests-2.32.3-py3-none-any.whl.metadata (4.6 kB) 2025-03-28 03:14:50.191758 | ubuntu-noble | #7 29.35 Collecting arrow (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:50.191857 | ubuntu-noble | #7 29.37 Downloading arrow-1.3.0-py3-none-any.whl.metadata (7.5 kB) 2025-03-28 03:14:50.191874 | ubuntu-noble | #7 29.46 Collecting rich (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:50.191901 | ubuntu-noble | #7 29.47 Downloading rich-13.9.4-py3-none-any.whl.metadata (18 kB) 2025-03-28 03:14:50.228745 | ubuntu-noble | #7 29.66 Collecting cffi>=1.12 (from cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-03-28 03:14:50.343850 | ubuntu-noble | #7 29.67 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (1.5 kB) 2025-03-28 03:14:50.451027 | ubuntu-noble | #7 29.71 Collecting iso8601>=0.1.11 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:50.451192 | ubuntu-noble | #7 29.73 Downloading iso8601-2.1.0-py3-none-any.whl.metadata (3.7 kB) 2025-03-28 03:14:50.451249 | ubuntu-noble | #7 29.78 Collecting oslo.i18n>=3.15.3 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:50.451481 | ubuntu-noble | #7 29.79 Downloading oslo.i18n-6.5.1-py3-none-any.whl.metadata (2.1 kB) 2025-03-28 03:14:50.593032 | ubuntu-noble | #7 29.83 Collecting netaddr>=0.10.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:50.593293 | ubuntu-noble | #7 29.84 Downloading netaddr-1.3.0-py3-none-any.whl.metadata (5.0 kB) 2025-03-28 03:14:50.593308 | ubuntu-noble | #7 29.88 Collecting debtcollector>=1.2.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:50.593334 | ubuntu-noble | #7 29.90 Downloading debtcollector-3.0.0-py3-none-any.whl.metadata (2.3 kB) 2025-03-28 03:14:50.770723 | ubuntu-noble | #7 29.97 Collecting pyparsing>=2.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:50.770827 | ubuntu-noble | #7 29.98 Downloading pyparsing-3.2.3-py3-none-any.whl.metadata (5.0 kB) 2025-03-28 03:14:50.770835 | ubuntu-noble | #7 30.02 Collecting packaging>=20.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:50.770852 | ubuntu-noble | #7 30.04 Downloading packaging-24.2-py3-none-any.whl.metadata (3.2 kB) 2025-03-28 03:14:50.936957 | ubuntu-noble | #7 30.07 Collecting tzdata>=2022.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:50.937078 | ubuntu-noble | #7 30.08 Downloading tzdata-2025.2-py2.py3-none-any.whl.metadata (1.4 kB) 2025-03-28 03:14:50.937103 | ubuntu-noble | #7 30.20 Collecting psutil>=3.2.2 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:50.937163 | ubuntu-noble | #7 30.22 Downloading psutil-7.0.0.tar.gz (497 kB) 2025-03-28 03:14:50.948943 | ubuntu-noble | #7 30.38 Installing build dependencies: started 2025-03-28 03:14:54.223011 | ubuntu-noble | #7 33.65 Installing build dependencies: finished with status 'done' 2025-03-28 03:14:54.374885 | ubuntu-noble | #7 33.65 Getting requirements to build wheel: started 2025-03-28 03:14:54.795108 | ubuntu-noble | #7 34.23 Getting requirements to build wheel: finished with status 'done' 2025-03-28 03:14:54.947634 | ubuntu-noble | #7 34.23 Preparing metadata (pyproject.toml): started 2025-03-28 03:14:55.384842 | ubuntu-noble | #7 34.82 Preparing metadata (pyproject.toml): finished with status 'done' 2025-03-28 03:14:55.492020 | ubuntu-noble | #7 34.92 Collecting pbr>=6.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:55.596702 | ubuntu-noble | #7 34.94 Downloading pbr-6.1.1-py2.py3-none-any.whl.metadata (3.4 kB) 2025-03-28 03:14:55.596781 | ubuntu-noble | #7 35.01 Collecting bcrypt>=3.2 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-03-28 03:14:55.717509 | ubuntu-noble | #7 35.03 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl.metadata (10 kB) 2025-03-28 03:14:55.717593 | ubuntu-noble | #7 35.09 Collecting pynacl>=1.5 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-03-28 03:14:55.838003 | ubuntu-noble | #7 35.10 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (8.6 kB) 2025-03-28 03:14:55.838068 | ubuntu-noble | #7 35.15 Collecting pyotp>=2.9.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-28 03:14:55.838094 | ubuntu-noble | #7 35.16 Downloading pyotp-2.9.0-py3-none-any.whl.metadata (9.8 kB) 2025-03-28 03:14:55.838100 | ubuntu-noble | #7 35.21 Collecting construct>=2.10.53 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-28 03:14:55.838106 | ubuntu-noble | #7 35.23 Downloading construct-2.10.70-py3-none-any.whl.metadata (4.2 kB) 2025-03-28 03:14:55.838113 | ubuntu-noble | #7 35.27 Collecting argon2_cffi>=18.1.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-28 03:14:55.981881 | ubuntu-noble | #7 35.28 Downloading argon2_cffi-23.1.0-py3-none-any.whl.metadata (5.2 kB) 2025-03-28 03:14:56.150958 | ubuntu-noble | #7 35.41 Collecting pycryptodomex>=3.6.2 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-28 03:14:56.151081 | ubuntu-noble | #7 35.43 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB) 2025-03-28 03:14:56.277085 | ubuntu-noble | #7 35.71 Collecting lxml (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-28 03:14:56.380003 | ubuntu-noble | #7 35.72 Downloading lxml-5.3.1-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (3.7 kB) 2025-03-28 03:14:56.503673 | ubuntu-noble | #7 35.76 Collecting colorama (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-03-28 03:14:56.503891 | ubuntu-noble | #7 35.78 Downloading colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) 2025-03-28 03:14:56.503910 | ubuntu-noble | #7 35.81 Collecting fasteners (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-03-28 03:14:56.503933 | ubuntu-noble | #7 35.82 Downloading fasteners-0.19-py3-none-any.whl.metadata (4.9 kB) 2025-03-28 03:14:56.629042 | ubuntu-noble | #7 35.86 Collecting sh (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-03-28 03:14:56.629142 | ubuntu-noble | #7 35.87 Downloading sh-2.2.2-py3-none-any.whl.metadata (3.7 kB) 2025-03-28 03:14:56.629157 | ubuntu-noble | #7 35.93 Collecting ruamel.yaml.clib>=0.2.7 (from ruamel.yaml==0.18.10->-r /tmp/requirements.txt (line 14)) 2025-03-28 03:14:56.629178 | ubuntu-noble | #7 35.95 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (2.7 kB) 2025-03-28 03:14:56.742961 | ubuntu-noble | #7 35.99 Collecting pathspec>=0.5.3 (from yamllint==1.37.0->-r /tmp/requirements.txt (line 15)) 2025-03-28 03:14:56.743054 | ubuntu-noble | #7 36.01 Downloading pathspec-0.12.1-py3-none-any.whl.metadata (21 kB) 2025-03-28 03:14:56.743067 | ubuntu-noble | #7 36.06 Collecting resolvelib<1.1.0,>=0.5.3 (from ansible-core~=2.18.4->ansible==11.4.0->-r /tmp/requirements.txt (line 2)) 2025-03-28 03:14:56.743089 | ubuntu-noble | #7 36.07 Downloading resolvelib-1.0.1-py2.py3-none-any.whl.metadata (4.0 kB) 2025-03-28 03:14:56.930186 | ubuntu-noble | #7 36.10 Collecting argon2-cffi-bindings (from argon2_cffi>=18.1.0->pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-28 03:14:56.930319 | ubuntu-noble | #7 36.12 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (6.7 kB) 2025-03-28 03:14:56.930328 | ubuntu-noble | #7 36.16 Collecting chardet>=3.0.2 (from binaryornot>=0.4.4->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:56.930334 | ubuntu-noble | #7 36.17 Downloading chardet-5.2.0-py3-none-any.whl.metadata (3.4 kB) 2025-03-28 03:14:56.930349 | ubuntu-noble | #7 36.20 Collecting pycparser (from cffi>=1.12->cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-03-28 03:14:57.048442 | ubuntu-noble | #7 36.22 Downloading pycparser-2.22-py3-none-any.whl.metadata (943 bytes) 2025-03-28 03:14:57.048515 | ubuntu-noble | #7 36.36 Collecting wrapt>=1.7.0 (from debtcollector>=1.2.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:57.048557 | ubuntu-noble | #7 36.38 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (6.4 kB) 2025-03-28 03:14:57.214501 | ubuntu-noble | #7 36.48 Collecting MarkupSafe>=2.0 (from Jinja2<4.0.0,>=2.7->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:57.214596 | ubuntu-noble | #7 36.50 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (4.0 kB) 2025-03-28 03:14:57.304857 | ubuntu-noble | #7 36.74 Collecting setuptools (from pbr>=6.1.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-28 03:14:57.413397 | ubuntu-noble | #7 36.75 Downloading setuptools-78.1.0-py3-none-any.whl.metadata (6.6 kB) 2025-03-28 03:14:57.549644 | ubuntu-noble | #7 36.83 Collecting text-unidecode>=1.3 (from python-slugify>=4.0.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:57.549791 | ubuntu-noble | #7 36.84 Downloading text_unidecode-1.3-py2.py3-none-any.whl.metadata (2.4 kB) 2025-03-28 03:14:57.549838 | ubuntu-noble | #7 36.98 Collecting charset-normalizer<4,>=2 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:57.677852 | ubuntu-noble | #7 37.00 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (35 kB) 2025-03-28 03:14:57.803629 | ubuntu-noble | #7 37.04 Collecting idna<4,>=2.5 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:57.803947 | ubuntu-noble | #7 37.05 Downloading idna-3.10-py3-none-any.whl.metadata (10 kB) 2025-03-28 03:14:57.803969 | ubuntu-noble | #7 37.11 Collecting urllib3<3,>=1.21.1 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:57.804165 | ubuntu-noble | #7 37.12 Downloading urllib3-2.3.0-py3-none-any.whl.metadata (6.5 kB) 2025-03-28 03:14:57.804212 | ubuntu-noble | #7 37.17 Collecting certifi>=2017.4.17 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:57.804266 | ubuntu-noble | #7 37.19 Downloading certifi-2025.1.31-py3-none-any.whl.metadata (2.5 kB) 2025-03-28 03:14:58.004601 | ubuntu-noble | #7 37.23 Collecting python-dateutil>=2.7.0 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:58.004723 | ubuntu-noble | #7 37.25 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl.metadata (8.4 kB) 2025-03-28 03:14:58.144990 | ubuntu-noble | #7 37.29 Collecting types-python-dateutil>=2.8.10 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:58.145092 | ubuntu-noble | #7 37.31 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl.metadata (2.1 kB) 2025-03-28 03:14:58.145102 | ubuntu-noble | #7 37.44 Collecting markdown-it-py>=2.2.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:58.145118 | ubuntu-noble | #7 37.45 Downloading markdown_it_py-3.0.0-py3-none-any.whl.metadata (6.9 kB) 2025-03-28 03:14:58.302651 | ubuntu-noble | #7 37.50 Collecting pygments<3.0.0,>=2.13.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:58.303419 | ubuntu-noble | #7 37.52 Downloading pygments-2.19.1-py3-none-any.whl.metadata (2.5 kB) 2025-03-28 03:14:58.303451 | ubuntu-noble | #7 37.57 Collecting mdurl~=0.1 (from markdown-it-py>=2.2.0->rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:58.303473 | ubuntu-noble | #7 37.59 Downloading mdurl-0.1.2-py3-none-any.whl.metadata (1.6 kB) 2025-03-28 03:14:58.507960 | ubuntu-noble | #7 37.63 Collecting six>=1.5 (from python-dateutil>=2.7.0->arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-28 03:14:58.508084 | ubuntu-noble | #7 37.65 Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB) 2025-03-28 03:14:58.508095 | ubuntu-noble | #7 37.73 Downloading PyYAML-6.0.2-cp312-cp312-musllinux_1_1_x86_64.whl (756 kB) 2025-03-28 03:14:58.508109 | ubuntu-noble | #7 37.77 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 756.6/756.6 kB 242.3 MB/s eta 0:00:00 2025-03-28 03:14:59.873594 | ubuntu-noble | #7 37.79 Downloading ansible-11.4.0-py3-none-any.whl (54.2 MB) 2025-03-28 03:14:59.873691 | ubuntu-noble | #7 39.30 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.2/54.2 MB 35.7 MB/s eta 0:00:00 2025-03-28 03:15:00.047030 | ubuntu-noble | #7 39.32 Downloading click-8.1.8-py3-none-any.whl (98 kB) 2025-03-28 03:15:00.155360 | ubuntu-noble | #7 39.34 Downloading cookiecutter-2.6.0-py3-none-any.whl (39 kB) 2025-03-28 03:15:00.155440 | ubuntu-noble | #7 39.36 Downloading cryptography-44.0.2-cp39-abi3-musllinux_1_2_x86_64.whl (4.3 MB) 2025-03-28 03:15:00.155489 | ubuntu-noble | #7 39.48 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.3/4.3 MB 36.6 MB/s eta 0:00:00 2025-03-28 03:15:00.262982 | ubuntu-noble | #7 39.50 Downloading loguru-0.7.3-py3-none-any.whl (61 kB) 2025-03-28 03:15:00.263107 | ubuntu-noble | #7 39.51 Downloading oslo.utils-8.2.0-py3-none-any.whl (134 kB) 2025-03-28 03:15:00.263118 | ubuntu-noble | #7 39.53 Downloading paramiko-3.5.1-py3-none-any.whl (227 kB) 2025-03-28 03:15:00.263124 | ubuntu-noble | #7 39.55 Downloading passlib-1.7.4-py2.py3-none-any.whl (525 kB) 2025-03-28 03:15:00.263132 | ubuntu-noble | #7 39.57 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 525.6/525.6 kB 25.1 MB/s eta 0:00:00 2025-03-28 03:15:00.263139 | ubuntu-noble | #7 39.58 Downloading pycryptodome-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-03-28 03:15:00.263181 | ubuntu-noble | #7 39.64 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 37.7 MB/s eta 0:00:00 2025-03-28 03:15:00.370370 | ubuntu-noble | #7 39.66 Downloading pykeepass-4.1.1.post1-py3-none-any.whl (55 kB) 2025-03-28 03:15:00.370488 | ubuntu-noble | #7 39.68 Downloading python_gilt-1.2.3-py2.py3-none-any.whl (22 kB) 2025-03-28 03:15:00.370496 | ubuntu-noble | #7 39.69 Downloading ruamel.yaml-0.18.10-py3-none-any.whl (117 kB) 2025-03-28 03:15:00.370515 | ubuntu-noble | #7 39.71 Downloading yamllint-1.37.0-py3-none-any.whl (68 kB) 2025-03-28 03:15:00.482120 | ubuntu-noble | #7 39.73 Downloading ansible_core-2.18.4-py3-none-any.whl (2.2 MB) 2025-03-28 03:15:00.482315 | ubuntu-noble | #7 39.79 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.2/2.2 MB 38.2 MB/s eta 0:00:00 2025-03-28 03:15:00.482333 | ubuntu-noble | #7 39.80 Downloading argon2_cffi-23.1.0-py3-none-any.whl (15 kB) 2025-03-28 03:15:00.482352 | ubuntu-noble | #7 39.82 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl (363 kB) 2025-03-28 03:15:00.587339 | ubuntu-noble | #7 39.84 Downloading binaryornot-0.4.4-py2.py3-none-any.whl (9.0 kB) 2025-03-28 03:15:00.587466 | ubuntu-noble | #7 39.85 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl (488 kB) 2025-03-28 03:15:00.587480 | ubuntu-noble | #7 39.88 Downloading construct-2.10.70-py3-none-any.whl (63 kB) 2025-03-28 03:15:00.587490 | ubuntu-noble | #7 39.90 Downloading debtcollector-3.0.0-py3-none-any.whl (23 kB) 2025-03-28 03:15:00.587500 | ubuntu-noble | #7 39.91 Downloading iso8601-2.1.0-py3-none-any.whl (7.5 kB) 2025-03-28 03:15:00.587523 | ubuntu-noble | #7 39.93 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) 2025-03-28 03:15:00.785389 | ubuntu-noble | #7 39.94 Downloading netaddr-1.3.0-py3-none-any.whl (2.3 MB) 2025-03-28 03:15:00.785503 | ubuntu-noble | #7 40.00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 39.2 MB/s eta 0:00:00 2025-03-28 03:15:00.785519 | ubuntu-noble | #7 40.02 Downloading oslo.i18n-6.5.1-py3-none-any.whl (46 kB) 2025-03-28 03:15:00.785544 | ubuntu-noble | #7 40.03 Downloading packaging-24.2-py3-none-any.whl (65 kB) 2025-03-28 03:15:00.843994 | ubuntu-noble | #7 40.05 Downloading pathspec-0.12.1-py3-none-any.whl (31 kB) 2025-03-28 03:15:00.844347 | ubuntu-noble | #7 40.07 Downloading pbr-6.1.1-py2.py3-none-any.whl (108 kB) 2025-03-28 03:15:00.844426 | ubuntu-noble | #7 40.27 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-03-28 03:15:00.951589 | ubuntu-noble | #7 40.34 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 38.3 MB/s eta 0:00:00 2025-03-28 03:15:01.067825 | ubuntu-noble | #7 40.35 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl (1.1 MB) 2025-03-28 03:15:01.067971 | ubuntu-noble | #7 40.38 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 36.3 MB/s eta 0:00:00 2025-03-28 03:15:01.257598 | ubuntu-noble | #7 40.40 Downloading pyotp-2.9.0-py3-none-any.whl (13 kB) 2025-03-28 03:15:01.258293 | ubuntu-noble | #7 40.41 Downloading pyparsing-3.2.3-py3-none-any.whl (111 kB) 2025-03-28 03:15:01.258314 | ubuntu-noble | #7 40.43 Downloading python_slugify-8.0.4-py2.py3-none-any.whl (10 kB) 2025-03-28 03:15:01.258321 | ubuntu-noble | #7 40.44 Downloading requests-2.32.3-py3-none-any.whl (64 kB) 2025-03-28 03:15:01.258327 | ubuntu-noble | #7 40.46 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl (745 kB) 2025-03-28 03:15:01.258335 | ubuntu-noble | #7 40.48 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 745.8/745.8 kB 35.6 MB/s eta 0:00:00 2025-03-28 03:15:01.258342 | ubuntu-noble | #7 40.50 Downloading tzdata-2025.2-py2.py3-none-any.whl (347 kB) 2025-03-28 03:15:01.258361 | ubuntu-noble | #7 40.52 Downloading arrow-1.3.0-py3-none-any.whl (66 kB) 2025-03-28 03:15:01.373276 | ubuntu-noble | #7 40.53 Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB) 2025-03-28 03:15:01.373416 | ubuntu-noble | #7 40.55 Downloading fasteners-0.19-py3-none-any.whl (18 kB) 2025-03-28 03:15:01.373429 | ubuntu-noble | #7 40.57 Downloading lxml-5.3.1-cp312-cp312-musllinux_1_2_x86_64.whl (5.1 MB) 2025-03-28 03:15:01.373456 | ubuntu-noble | #7 40.69 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.1/5.1 MB 41.7 MB/s eta 0:00:00 2025-03-28 03:15:01.474940 | ubuntu-noble | #7 40.70 Downloading rich-13.9.4-py3-none-any.whl (242 kB) 2025-03-28 03:15:01.475038 | ubuntu-noble | #7 40.72 Downloading sh-2.2.2-py3-none-any.whl (38 kB) 2025-03-28 03:15:01.476679 | ubuntu-noble | #7 40.74 Downloading certifi-2025.1.31-py3-none-any.whl (166 kB) 2025-03-28 03:15:01.476787 | ubuntu-noble | #7 40.75 Downloading chardet-5.2.0-py3-none-any.whl (199 kB) 2025-03-28 03:15:01.476793 | ubuntu-noble | #7 40.77 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl (146 kB) 2025-03-28 03:15:01.476801 | ubuntu-noble | #7 40.79 Downloading idna-3.10-py3-none-any.whl (70 kB) 2025-03-28 03:15:01.476807 | ubuntu-noble | #7 40.80 Downloading markdown_it_py-3.0.0-py3-none-any.whl (87 kB) 2025-03-28 03:15:01.476828 | ubuntu-noble | #7 40.82 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl (23 kB) 2025-03-28 03:15:01.575903 | ubuntu-noble | #7 40.84 Downloading pygments-2.19.1-py3-none-any.whl (1.2 MB) 2025-03-28 03:15:01.576009 | ubuntu-noble | #7 40.87 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 37.7 MB/s eta 0:00:00 2025-03-28 03:15:01.576021 | ubuntu-noble | #7 40.89 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl (229 kB) 2025-03-28 03:15:01.576031 | ubuntu-noble | #7 40.91 Downloading resolvelib-1.0.1-py2.py3-none-any.whl (17 kB) 2025-03-28 03:15:01.576054 | ubuntu-noble | #7 40.92 Downloading text_unidecode-1.3-py2.py3-none-any.whl (78 kB) 2025-03-28 03:15:01.808368 | ubuntu-noble | #7 40.94 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl (14 kB) 2025-03-28 03:15:01.808521 | ubuntu-noble | #7 40.96 Downloading urllib3-2.3.0-py3-none-any.whl (128 kB) 2025-03-28 03:15:01.808534 | ubuntu-noble | #7 40.97 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl (87 kB) 2025-03-28 03:15:01.808542 | ubuntu-noble | #7 40.99 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl (88 kB) 2025-03-28 03:15:01.808562 | ubuntu-noble | #7 41.01 Downloading pycparser-2.22-py3-none-any.whl (117 kB) 2025-03-28 03:15:01.808586 | ubuntu-noble | #7 41.02 Downloading setuptools-78.1.0-py3-none-any.whl (1.3 MB) 2025-03-28 03:15:02.363417 | ubuntu-noble | #7 41.06 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 38.6 MB/s eta 0:00:00 2025-03-28 03:15:02.363506 | ubuntu-noble | #7 41.07 Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) 2025-03-28 03:15:02.363515 | ubuntu-noble | #7 41.09 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB) 2025-03-28 03:15:02.363531 | ubuntu-noble | #7 41.79 Building wheels for collected packages: pwgen, psutil 2025-03-28 03:15:02.516557 | ubuntu-noble | #7 41.80 Building wheel for pwgen (pyproject.toml): started 2025-03-28 03:15:02.872254 | ubuntu-noble | #7 42.30 Building wheel for pwgen (pyproject.toml): finished with status 'done' 2025-03-28 03:15:03.032868 | ubuntu-noble | #7 42.31 Created wheel for pwgen: filename=pwgen-0.8.2.post0-py3-none-any.whl size=3798 sha256=ef92a8ebc2e49948d4653ef55d3f416194901d7715a0d5d06dda0c618ec700d4 2025-03-28 03:15:06.697740 | ubuntu-noble | #7 42.31 Stored in directory: /tmp/pip-ephem-wheel-cache-5zvuy_4e/wheels/8e/56/bf/a88cd4e5b84752858d6db0c914d636211570e8a1e73b53b5dd 2025-03-28 03:15:06.697817 | ubuntu-noble | #7 42.31 Building wheel for psutil (pyproject.toml): started 2025-03-28 03:15:06.697835 | ubuntu-noble | #7 46.13 Building wheel for psutil (pyproject.toml): finished with status 'done' 2025-03-28 03:15:06.861969 | ubuntu-noble | #7 46.13 Created wheel for psutil: filename=psutil-7.0.0-cp36-abi3-linux_x86_64.whl size=277226 sha256=a00f717d688a188ebc508020d78059f7fecb1458186bd189fac166b98ae4f0ad 2025-03-28 03:15:07.301934 | ubuntu-noble | #7 46.13 Stored in directory: /tmp/pip-ephem-wheel-cache-5zvuy_4e/wheels/0c/58/48/ccefe23b905f1dd76f8444f328ff2cfb1d4920a081f9d5d03d 2025-03-28 03:15:07.302038 | ubuntu-noble | #7 46.14 Successfully built pwgen psutil 2025-03-28 03:15:07.302068 | ubuntu-noble | #7 46.73 Installing collected packages: text-unidecode, resolvelib, pwgen, passlib, wrapt, urllib3, tzdata, types-python-dateutil, six, sh, setuptools, ruamel.yaml.clib, PyYAML, python-slugify, pyparsing, pyotp, pygments, pycryptodomex, pycryptodome, pycparser, psutil, pathspec, packaging, netaddr, mdurl, MarkupSafe, lxml, loguru, iso8601, idna, fasteners, construct, colorama, click, charset-normalizer, chardet, certifi, bcrypt, yamllint, ruamel.yaml, requests, python-gilt, python-dateutil, pbr, markdown-it-py, Jinja2, debtcollector, cffi, binaryornot, rich, pynacl, oslo.i18n, cryptography, arrow, argon2-cffi-bindings, paramiko, oslo.utils, cookiecutter, argon2_cffi, ansible-core, pykeepass, ansible 2025-03-28 03:16:24.039469 | ubuntu-noble | #7 123.5 Successfully installed Jinja2-3.1.6 MarkupSafe-3.0.2 PyYAML-6.0.2 ansible-11.4.0 ansible-core-2.18.4 argon2-cffi-bindings-21.2.0 argon2_cffi-23.1.0 arrow-1.3.0 bcrypt-4.3.0 binaryornot-0.4.4 certifi-2025.1.31 cffi-1.17.1 chardet-5.2.0 charset-normalizer-3.4.1 click-8.1.8 colorama-0.4.6 construct-2.10.70 cookiecutter-2.6.0 cryptography-44.0.2 debtcollector-3.0.0 fasteners-0.19 idna-3.10 iso8601-2.1.0 loguru-0.7.3 lxml-5.3.1 markdown-it-py-3.0.0 mdurl-0.1.2 netaddr-1.3.0 oslo.i18n-6.5.1 oslo.utils-8.2.0 packaging-24.2 paramiko-3.5.1 passlib-1.7.4 pathspec-0.12.1 pbr-6.1.1 psutil-7.0.0 pwgen-0.8.2.post0 pycparser-2.22 pycryptodome-3.22.0 pycryptodomex-3.22.0 pygments-2.19.1 pykeepass-4.1.1.post1 pynacl-1.5.0 pyotp-2.9.0 pyparsing-3.2.3 python-dateutil-2.9.0.post0 python-gilt-1.2.3 python-slugify-8.0.4 requests-2.32.3 resolvelib-1.0.1 rich-13.9.4 ruamel.yaml-0.18.10 ruamel.yaml.clib-0.2.12 setuptools-78.1.0 sh-2.2.2 six-1.17.0 text-unidecode-1.3 types-python-dateutil-2.9.0.20241206 tzdata-2025.2 urllib3-2.3.0 wrapt-1.17.2 yamllint-1.37.0 2025-03-28 03:16:24.189892 | ubuntu-noble | #7 123.5 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning. 2025-03-28 03:16:24.655413 | ubuntu-noble | #7 124.1 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/main: No such file or directory 2025-03-28 03:16:24.759947 | ubuntu-noble | #7 124.1 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/community: No such file or directory 2025-03-28 03:16:24.760091 | ubuntu-noble | #7 124.1 (1/36) Purging .build-deps (20250328.031423) 2025-03-28 03:16:24.890718 | ubuntu-noble | #7 124.1 (2/36) Purging build-base (0.5-r3) 2025-03-28 03:16:24.890896 | ubuntu-noble | #7 124.1 (3/36) Purging file (5.46-r2) 2025-03-28 03:16:24.890908 | ubuntu-noble | #7 124.1 (4/36) Purging g++ (14.2.0-r4) 2025-03-28 03:16:24.890915 | ubuntu-noble | #7 124.1 (5/36) Purging libstdc++-dev (14.2.0-r4) 2025-03-28 03:16:24.890942 | ubuntu-noble | #7 124.1 (6/36) Purging make (4.4.1-r2) 2025-03-28 03:16:24.890952 | ubuntu-noble | #7 124.1 (7/36) Purging fortify-headers (1.1-r5) 2025-03-28 03:16:24.890959 | ubuntu-noble | #7 124.1 (8/36) Purging patch (2.7.6-r10) 2025-03-28 03:16:24.890965 | ubuntu-noble | #7 124.1 (9/36) Purging cargo (1.83.0-r0) 2025-03-28 03:16:24.890972 | ubuntu-noble | #7 124.1 (10/36) Purging libffi-dev (3.4.7-r0) 2025-03-28 03:16:24.891026 | ubuntu-noble | #7 124.1 (11/36) Purging linux-headers (6.6-r1) 2025-03-28 03:16:24.891032 | ubuntu-noble | #7 124.2 (12/36) Purging openssl-dev (3.3.3-r0) 2025-03-28 03:16:24.891037 | ubuntu-noble | #7 124.2 (13/36) Purging python3-dev (3.12.9-r0) 2025-03-28 03:16:24.891042 | ubuntu-noble | #7 124.2 (14/36) Purging python3-pyc (3.12.9-r0) 2025-03-28 03:16:24.891047 | ubuntu-noble | #7 124.2 (15/36) Purging python3-pycache-pyc0 (3.12.9-r0) 2025-03-28 03:16:24.891063 | ubuntu-noble | #7 124.2 (16/36) Purging pyc (3.12.9-r0) 2025-03-28 03:16:25.088812 | ubuntu-noble | #7 124.2 (17/36) Purging python3 (3.12.9-r0) 2025-03-28 03:16:25.088915 | ubuntu-noble | #7 124.2 (18/36) Purging rust (1.83.0-r0) 2025-03-28 03:16:25.088996 | ubuntu-noble | #7 124.3 (19/36) Purging gcc (14.2.0-r4) 2025-03-28 03:16:25.089006 | ubuntu-noble | #7 124.3 (20/36) Purging binutils (2.43.1-r2) 2025-03-28 03:16:25.089027 | ubuntu-noble | #7 124.3 (21/36) Purging libatomic (14.2.0-r4) 2025-03-28 03:16:25.438826 | ubuntu-noble | #7 124.3 (22/36) Purging libgomp (14.2.0-r4) 2025-03-28 03:16:25.438925 | ubuntu-noble | #7 124.3 (23/36) Purging musl-dev (1.2.5-r9) 2025-03-28 03:16:25.438959 | ubuntu-noble | #7 124.3 (24/36) Purging isl26 (0.26-r1) 2025-03-28 03:16:25.438971 | ubuntu-noble | #7 124.3 (25/36) Purging jansson (2.14-r4) 2025-03-28 03:16:25.438982 | ubuntu-noble | #7 124.3 (26/36) Purging libmagic (5.46-r2) 2025-03-28 03:16:25.439021 | ubuntu-noble | #7 124.3 (27/36) Purging llvm19-libs (19.1.4-r1) 2025-03-28 03:16:25.439035 | ubuntu-noble | #7 124.4 (28/36) Purging mpc1 (1.3.1-r1) 2025-03-28 03:16:25.439047 | ubuntu-noble | #7 124.4 (29/36) Purging mpdecimal (4.0.0-r0) 2025-03-28 03:16:25.439058 | ubuntu-noble | #7 124.4 (30/36) Purging mpfr4 (4.2.1-r0) 2025-03-28 03:16:25.439070 | ubuntu-noble | #7 124.4 (31/36) Purging pkgconf (2.3.0-r0) 2025-03-28 03:16:25.439083 | ubuntu-noble | #7 124.4 (32/36) Purging scudo-malloc (19.1.4-r0) 2025-03-28 03:16:25.439097 | ubuntu-noble | #7 124.4 (33/36) Purging gmp (6.3.0-r2) 2025-03-28 03:16:25.439108 | ubuntu-noble | #7 124.4 (34/36) Purging libstdc++ (14.2.0-r4) 2025-03-28 03:16:25.439119 | ubuntu-noble | #7 124.4 (35/36) Purging libgcc (14.2.0-r4) 2025-03-28 03:16:25.439129 | ubuntu-noble | #7 124.4 (36/36) Purging libxml2 (2.13.4-r5) 2025-03-28 03:16:25.439141 | ubuntu-noble | #7 124.4 Executing busybox-1.37.0-r12.trigger 2025-03-28 03:16:25.439151 | ubuntu-noble | #7 124.4 OK: 26 MiB in 52 packages 2025-03-28 03:16:25.439175 | ubuntu-noble | #7 DONE 124.9s 2025-03-28 03:16:25.596220 | ubuntu-noble | 2025-03-28 03:16:25.632136 | ubuntu-noble | #8 [4/5] COPY . /data 2025-03-28 03:16:25.632279 | ubuntu-noble | #8 DONE 0.2s 2025-03-28 03:16:25.859904 | ubuntu-noble | 2025-03-28 03:16:34.607327 | ubuntu-noble | #9 [5/5] WORKDIR /data 2025-03-28 03:16:34.607402 | ubuntu-noble | #9 DONE 0.1s 2025-03-28 03:16:34.607412 | ubuntu-noble | 2025-03-28 03:16:34.607420 | ubuntu-noble | #10 exporting to image 2025-03-28 03:16:34.607426 | ubuntu-noble | #10 exporting layers 2025-03-28 03:16:34.607443 | ubuntu-noble | #10 exporting layers 8.9s done 2025-03-28 03:16:34.807960 | ubuntu-noble | #10 writing image sha256:697488aa13f23b4a701a7c025640afb803b57dda2e14dbe913e8bd4f012fbfe2 done 2025-03-28 03:16:34.892118 | ubuntu-noble | #10 naming to docker.io/library/7f8d348 done 2025-03-28 03:16:34.892256 | ubuntu-noble | #10 DONE 8.9s 2025-03-28 03:16:35.282794 | ubuntu-noble | changed 2025-03-28 03:16:35.293416 | 2025-03-28 03:16:35.293514 | TASK [Run push script] 2025-03-28 03:16:35.668615 | ubuntu-noble | ++ git rev-parse --short HEAD 2025-03-28 03:16:35.703358 | ubuntu-noble | + revision=7f8d348 2025-03-28 03:16:35.703423 | ubuntu-noble | + [[ -n osism.harbor.regio.digital ]] 2025-03-28 03:16:35.703431 | ubuntu-noble | + repository=osism.harbor.regio.digital/osism/cookiecutter 2025-03-28 03:16:35.703438 | ubuntu-noble | + docker tag 7f8d348 osism.harbor.regio.digital/osism/cookiecutter:latest 2025-03-28 03:16:35.703454 | ubuntu-noble | + docker push osism.harbor.regio.digital/osism/cookiecutter:latest 2025-03-28 03:16:35.739439 | ubuntu-noble | The push refers to repository [osism.harbor.regio.digital/osism/cookiecutter] 2025-03-28 03:16:35.767873 | ubuntu-noble | 5f70bf18a086: Preparing 2025-03-28 03:16:36.502478 | ubuntu-noble | c279df2ebba1: Preparing 2025-03-28 03:16:36.502562 | ubuntu-noble | 2b08cb82bcc1: Preparing 2025-03-28 03:16:36.502573 | ubuntu-noble | f52dde8cf84b: Preparing 2025-03-28 03:16:36.502582 | ubuntu-noble | 489dcb666f26: Preparing 2025-03-28 03:16:36.502590 | ubuntu-noble | 95e6092fd8de: Preparing 2025-03-28 03:16:36.502597 | ubuntu-noble | 3553588814e5: Preparing 2025-03-28 03:16:36.502605 | ubuntu-noble | 08000c18d16d: Preparing 2025-03-28 03:16:36.502612 | ubuntu-noble | 95e6092fd8de: Waiting 2025-03-28 03:16:36.502620 | ubuntu-noble | 08000c18d16d: Waiting 2025-03-28 03:16:36.502628 | ubuntu-noble | 3553588814e5: Waiting 2025-03-28 03:16:36.502659 | ubuntu-noble | 489dcb666f26: Layer already exists 2025-03-28 03:16:37.053491 | ubuntu-noble | 95e6092fd8de: Layer already exists 2025-03-28 03:16:37.989880 | ubuntu-noble | 3553588814e5: Layer already exists 2025-03-28 03:16:38.314321 | ubuntu-noble | 08000c18d16d: Layer already exists 2025-03-28 03:16:41.196287 | ubuntu-noble | 5f70bf18a086: Pushed 2025-03-28 03:16:41.947621 | ubuntu-noble | f52dde8cf84b: Pushed 2025-03-28 03:16:41.997096 | ubuntu-noble | c279df2ebba1: Pushed 2025-03-28 03:17:22.853815 | ubuntu-noble | 2b08cb82bcc1: Pushed 2025-03-28 03:17:33.040042 | ubuntu-noble | latest: digest: sha256:dfbbe987896821322e7e04c48d337c7fc36d0581bcc24638b1b328b8b4b09eb7 size: 1993 2025-03-28 03:17:33.380374 | ubuntu-noble | changed 2025-03-28 03:17:33.415322 | 2025-03-28 03:17:33.415415 | PLAY RECAP 2025-03-28 03:17:33.415474 | ubuntu-noble | ok: 3 changed: 3 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-03-28 03:17:33.415503 | 2025-03-28 03:17:33.524866 | RUN END RESULT_NORMAL: [untrusted : github.com/osism/cfg-cookiecutter/playbooks/build.yml@main] 2025-03-28 03:17:33.532882 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-03-28 03:17:34.224856 | 2025-03-28 03:17:34.224997 | PLAY [Base post] 2025-03-28 03:17:34.251152 | 2025-03-28 03:17:34.251288 | TASK [remove-build-sshkey : Remove the build SSH key from all nodes] 2025-03-28 03:17:35.128661 | ubuntu-noble | changed 2025-03-28 03:17:35.162720 | 2025-03-28 03:17:35.162832 | PLAY RECAP 2025-03-28 03:17:35.162899 | ubuntu-noble | ok: 1 changed: 1 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-03-28 03:17:35.163064 | 2025-03-28 03:17:35.273349 | POST-RUN END RESULT_NORMAL: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-03-28 03:17:35.276518 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post-logs.yaml@main] 2025-03-28 03:17:35.955438 | 2025-03-28 03:17:35.955559 | PLAY [Base post-logs] 2025-03-28 03:17:35.970089 | 2025-03-28 03:17:35.970223 | TASK [generate-zuul-manifest : Generate Zuul manifest] 2025-03-28 03:17:36.389325 | localhost | changed 2025-03-28 03:17:36.396766 | 2025-03-28 03:17:36.396926 | TASK [generate-zuul-manifest : Return Zuul manifest URL to Zuul] 2025-03-28 03:17:36.427893 | localhost | ok 2025-03-28 03:17:36.437766 | 2025-03-28 03:17:36.437887 | TASK [Set zuul-log-path fact] 2025-03-28 03:17:36.456111 | localhost | ok 2025-03-28 03:17:36.470126 | 2025-03-28 03:17:36.470271 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-03-28 03:17:36.508869 | localhost | ok 2025-03-28 03:17:36.516887 | 2025-03-28 03:17:36.516998 | TASK [upload-logs : Create log directories] 2025-03-28 03:17:37.017049 | localhost | changed 2025-03-28 03:17:37.022884 | 2025-03-28 03:17:37.023010 | TASK [upload-logs : Ensure logs are readable before uploading] 2025-03-28 03:17:37.486883 | localhost -> localhost | ok: Runtime: 0:00:00.007296 2025-03-28 03:17:37.492444 | 2025-03-28 03:17:37.492564 | TASK [upload-logs : Upload logs to log server] 2025-03-28 03:17:38.072647 | localhost | Output suppressed because no_log was given 2025-03-28 03:17:38.077524 | 2025-03-28 03:17:38.077659 | LOOP [upload-logs : Compress console log and json output] 2025-03-28 03:17:38.150277 | localhost | skipping: Conditional result was False 2025-03-28 03:17:38.167296 | localhost | skipping: Conditional result was False 2025-03-28 03:17:38.183576 | 2025-03-28 03:17:38.183785 | LOOP [upload-logs : Upload compressed console log and json output] 2025-03-28 03:17:38.255866 | localhost | skipping: Conditional result was False 2025-03-28 03:17:38.256566 | 2025-03-28 03:17:38.266638 | localhost | skipping: Conditional result was False 2025-03-28 03:17:38.280219 | 2025-03-28 03:17:38.280430 | LOOP [upload-logs : Upload console log and json output]