2025-04-18 03:04:27.585569 | Job console starting... 2025-04-18 03:04:27.600771 | Updating repositories 2025-04-18 03:04:27.632515 | Preparing job workspace 2025-04-18 03:04:28.682668 | Running Ansible setup... 2025-04-18 03:04:34.360657 | PRE-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/pre.yaml@main] 2025-04-18 03:04:35.676363 | 2025-04-18 03:04:35.682123 | PLAY [Base pre] 2025-04-18 03:04:35.712021 | 2025-04-18 03:04:35.712126 | TASK [Setup log path fact] 2025-04-18 03:04:35.767911 | ubuntu-noble | ok 2025-04-18 03:04:35.805355 | 2025-04-18 03:04:35.805479 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-04-18 03:04:35.866079 | ubuntu-noble | ok 2025-04-18 03:04:35.884217 | 2025-04-18 03:04:35.884311 | TASK [emit-job-header : Print job information] 2025-04-18 03:04:35.974418 | # Job Information 2025-04-18 03:04:35.974559 | Ansible Version: 2.15.3 2025-04-18 03:04:35.974587 | Job: container-image-cfg-cookiecutter-push 2025-04-18 03:04:35.974613 | Pipeline: periodic-daily 2025-04-18 03:04:35.974630 | Executor: 7d211f194f6a 2025-04-18 03:04:35.974645 | Triggered by: https://github.com/osism/cfg-cookiecutter 2025-04-18 03:04:35.974660 | Event ID: 34b19ff17c6f470c89a3be18d66c4e7d 2025-04-18 03:04:35.991497 | 2025-04-18 03:04:35.991603 | LOOP [emit-job-header : Print node information] 2025-04-18 03:04:36.340071 | ubuntu-noble | ok: 2025-04-18 03:04:36.340274 | ubuntu-noble | # Node Information 2025-04-18 03:04:36.340306 | ubuntu-noble | Inventory Hostname: ubuntu-noble 2025-04-18 03:04:36.340326 | ubuntu-noble | Hostname: ubuntu 2025-04-18 03:04:36.340344 | ubuntu-noble | Username: zuul 2025-04-18 03:04:36.340361 | ubuntu-noble | Distro: Ubuntu 24.04 2025-04-18 03:04:36.340380 | ubuntu-noble | Provider: regiocloud-a 2025-04-18 03:04:36.340420 | ubuntu-noble | Label: ubuntu-noble 2025-04-18 03:04:36.340437 | ubuntu-noble | Product Name: OpenStack Nova 2025-04-18 03:04:36.340454 | ubuntu-noble | Interface IP: 81.163.192.30 2025-04-18 03:04:36.358315 | 2025-04-18 03:04:36.358417 | TASK [log-inventory : Ensure Zuul Ansible directory exists] 2025-04-18 03:04:37.271527 | ubuntu-noble -> localhost | changed 2025-04-18 03:04:37.278886 | 2025-04-18 03:04:37.278985 | TASK [log-inventory : Copy ansible inventory to logs dir] 2025-04-18 03:04:38.948162 | ubuntu-noble -> localhost | changed 2025-04-18 03:04:38.959526 | 2025-04-18 03:04:38.959617 | TASK [add-build-sshkey : Check to see if ssh key was already created for this build] 2025-04-18 03:04:39.502351 | ubuntu-noble -> localhost | ok 2025-04-18 03:04:39.508860 | 2025-04-18 03:04:39.508955 | TASK [add-build-sshkey : Create a new key in workspace based on build UUID] 2025-04-18 03:04:39.558031 | ubuntu-noble | ok 2025-04-18 03:04:39.574444 | ubuntu-noble | included: /var/lib/zuul/builds/c939d501ef10439aacdfde9bd3c23ac3/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/create-key-and-replace.yaml 2025-04-18 03:04:39.583547 | 2025-04-18 03:04:39.583636 | TASK [add-build-sshkey : Create Temp SSH key] 2025-04-18 03:04:40.437288 | ubuntu-noble -> localhost | Generating public/private rsa key pair. 2025-04-18 03:04:40.437435 | ubuntu-noble -> localhost | Your identification has been saved in /var/lib/zuul/builds/c939d501ef10439aacdfde9bd3c23ac3/work/c939d501ef10439aacdfde9bd3c23ac3_id_rsa 2025-04-18 03:04:40.437463 | ubuntu-noble -> localhost | Your public key has been saved in /var/lib/zuul/builds/c939d501ef10439aacdfde9bd3c23ac3/work/c939d501ef10439aacdfde9bd3c23ac3_id_rsa.pub 2025-04-18 03:04:40.437483 | ubuntu-noble -> localhost | The key fingerprint is: 2025-04-18 03:04:40.437502 | ubuntu-noble -> localhost | SHA256:mA2O7RlzSqTIg87G5cmirZPn1M3wbz8D9wMoxZDIud8 zuul-build-sshkey 2025-04-18 03:04:40.437521 | ubuntu-noble -> localhost | The key's randomart image is: 2025-04-18 03:04:40.437537 | ubuntu-noble -> localhost | +---[RSA 3072]----+ 2025-04-18 03:04:40.437554 | ubuntu-noble -> localhost | | . o . | 2025-04-18 03:04:40.437571 | ubuntu-noble -> localhost | | + o | 2025-04-18 03:04:40.437586 | ubuntu-noble -> localhost | | .oo | 2025-04-18 03:04:40.437610 | ubuntu-noble -> localhost | | o ..* =o | 2025-04-18 03:04:40.437626 | ubuntu-noble -> localhost | |. +.+.OoS. | 2025-04-18 03:04:40.437641 | ubuntu-noble -> localhost | |+ +o.Bo*E o | 2025-04-18 03:04:40.437660 | ubuntu-noble -> localhost | | B.+. B. o o | 2025-04-18 03:04:40.437677 | ubuntu-noble -> localhost | |=oo .. o o | 2025-04-18 03:04:40.437693 | ubuntu-noble -> localhost | |o=o ....o . | 2025-04-18 03:04:40.437708 | ubuntu-noble -> localhost | +----[SHA256]-----+ 2025-04-18 03:04:40.437747 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.219455 2025-04-18 03:04:40.445741 | 2025-04-18 03:04:40.445837 | TASK [add-build-sshkey : Remote setup ssh keys (linux)] 2025-04-18 03:04:40.480230 | ubuntu-noble | ok 2025-04-18 03:04:40.489824 | ubuntu-noble | included: /var/lib/zuul/builds/c939d501ef10439aacdfde9bd3c23ac3/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/remote-linux.yaml 2025-04-18 03:04:40.498463 | 2025-04-18 03:04:40.498538 | TASK [add-build-sshkey : Remove previously added zuul-build-sshkey] 2025-04-18 03:04:40.512679 | ubuntu-noble | skipping: Conditional result was False 2025-04-18 03:04:40.518800 | 2025-04-18 03:04:40.519140 | TASK [add-build-sshkey : Enable access via build key on all nodes] 2025-04-18 03:04:41.241129 | ubuntu-noble | changed 2025-04-18 03:04:41.246993 | 2025-04-18 03:04:41.247071 | TASK [add-build-sshkey : Make sure user has a .ssh] 2025-04-18 03:04:41.592965 | ubuntu-noble | ok 2025-04-18 03:04:41.602997 | 2025-04-18 03:04:41.603094 | TASK [add-build-sshkey : Install build private key as SSH key on all nodes] 2025-04-18 03:04:42.422471 | ubuntu-noble | changed 2025-04-18 03:04:42.429379 | 2025-04-18 03:04:42.429472 | TASK [add-build-sshkey : Install build public key as SSH key on all nodes] 2025-04-18 03:04:43.158983 | ubuntu-noble | changed 2025-04-18 03:04:43.171538 | 2025-04-18 03:04:43.171642 | TASK [add-build-sshkey : Remote setup ssh keys (windows)] 2025-04-18 03:04:43.206541 | ubuntu-noble | skipping: Conditional result was False 2025-04-18 03:04:43.216032 | 2025-04-18 03:04:43.216159 | TASK [remove-zuul-sshkey : Remove master key from local agent] 2025-04-18 03:04:43.661115 | ubuntu-noble -> localhost | changed 2025-04-18 03:04:43.672606 | 2025-04-18 03:04:43.672697 | TASK [add-build-sshkey : Add back temp key] 2025-04-18 03:04:44.012749 | ubuntu-noble -> localhost | Identity added: /var/lib/zuul/builds/c939d501ef10439aacdfde9bd3c23ac3/work/c939d501ef10439aacdfde9bd3c23ac3_id_rsa (zuul-build-sshkey) 2025-04-18 03:04:44.012949 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.012205 2025-04-18 03:04:44.018980 | 2025-04-18 03:04:44.019057 | TASK [add-build-sshkey : Verify we can still SSH to all nodes] 2025-04-18 03:04:44.429336 | ubuntu-noble | ok 2025-04-18 03:04:44.441064 | 2025-04-18 03:04:44.441200 | TASK [add-build-sshkey : Verify we can still SSH to all nodes (windows)] 2025-04-18 03:04:44.562373 | ubuntu-noble | skipping: Conditional result was False 2025-04-18 03:04:44.577615 | 2025-04-18 03:04:44.577719 | TASK [start-zuul-console : Start zuul_console daemon.] 2025-04-18 03:04:44.992235 | ubuntu-noble | ok 2025-04-18 03:04:45.006046 | 2025-04-18 03:04:45.006136 | TASK [validate-host : Define zuul_info_dir fact] 2025-04-18 03:04:45.038017 | ubuntu-noble | ok 2025-04-18 03:04:45.048661 | 2025-04-18 03:04:45.048754 | TASK [validate-host : Ensure Zuul Ansible directory exists] 2025-04-18 03:04:45.467342 | ubuntu-noble -> localhost | ok 2025-04-18 03:04:45.482844 | 2025-04-18 03:04:45.483198 | TASK [validate-host : Collect information about the host] 2025-04-18 03:04:46.633080 | ubuntu-noble | ok 2025-04-18 03:04:46.650162 | 2025-04-18 03:04:46.650311 | TASK [validate-host : Sanitize hostname] 2025-04-18 03:04:46.730643 | ubuntu-noble | ok 2025-04-18 03:04:46.738698 | 2025-04-18 03:04:46.738848 | TASK [validate-host : Write out all ansible variables/facts known for each host] 2025-04-18 03:04:47.509108 | ubuntu-noble -> localhost | changed 2025-04-18 03:04:47.516181 | 2025-04-18 03:04:47.516283 | TASK [validate-host : Collect information about zuul worker] 2025-04-18 03:04:48.203378 | ubuntu-noble | ok 2025-04-18 03:04:48.215007 | 2025-04-18 03:04:48.215118 | TASK [validate-host : Write out all zuul information for each host] 2025-04-18 03:04:48.932468 | ubuntu-noble -> localhost | changed 2025-04-18 03:04:48.944935 | 2025-04-18 03:04:48.945028 | TASK [prepare-workspace-log : Start zuul_console daemon.] 2025-04-18 03:04:49.240163 | ubuntu-noble | ok 2025-04-18 03:04:49.251643 | 2025-04-18 03:04:49.251741 | TASK [prepare-workspace-log : Synchronize src repos to workspace directory.] 2025-04-18 03:04:50.184370 | ubuntu-noble | changed: 2025-04-18 03:04:50.184571 | ubuntu-noble | cd+++++++++ src/ 2025-04-18 03:04:50.184603 | ubuntu-noble | cd+++++++++ src/github.com/ 2025-04-18 03:04:50.184624 | ubuntu-noble | cd+++++++++ src/github.com/osism/ 2025-04-18 03:04:50.184642 | ubuntu-noble | cd+++++++++ src/github.com/osism/cfg-cookiecutter/ 2025-04-18 03:04:50.184659 | ubuntu-noble | Containerfile 2025-04-18 03:04:50.184771 | ubuntu-noble | -r /tmp/requirements.txt (line 2)) 2025-04-18 03:06:11.137817 | ubuntu-noble | #7 24.64 Downloading ansible_core-2.18.4-py3-none-any.whl.metadata (7.7 kB) 2025-04-18 03:06:11.257882 | ubuntu-noble | #7 24.67 Collecting binaryornot>=0.4.4 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:11.257944 | ubuntu-noble | #7 24.69 Downloading binaryornot-0.4.4-py2.py3-none-any.whl.metadata (6.0 kB) 2025-04-18 03:06:11.257951 | ubuntu-noble | #7 24.74 Collecting Jinja2<4.0.0,>=2.7 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:11.257967 | ubuntu-noble | #7 24.76 Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB) 2025-04-18 03:06:11.408632 | ubuntu-noble | #7 24.80 Collecting python-slugify>=4.0.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:11.408715 | ubuntu-noble | #7 24.81 Downloading python_slugify-8.0.4-py2.py3-none-any.whl.metadata (8.5 kB) 2025-04-18 03:06:11.408728 | ubuntu-noble | #7 24.86 Collecting requests>=2.23.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:11.408748 | ubuntu-noble | #7 24.88 Downloading requests-2.32.3-py3-none-any.whl.metadata (4.6 kB) 2025-04-18 03:06:11.568922 | ubuntu-noble | #7 24.92 Collecting arrow (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:11.569017 | ubuntu-noble | #7 24.94 Downloading arrow-1.3.0-py3-none-any.whl.metadata (7.5 kB) 2025-04-18 03:06:11.569027 | ubuntu-noble | #7 25.02 Collecting rich (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:11.569041 | ubuntu-noble | #7 25.03 Downloading rich-14.0.0-py3-none-any.whl.metadata (18 kB) 2025-04-18 03:06:11.669559 | ubuntu-noble | #7 25.18 Collecting cffi>=1.12 (from cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-04-18 03:06:11.669635 | ubuntu-noble | #7 25.19 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (1.5 kB) 2025-04-18 03:06:11.773743 | ubuntu-noble | #7 25.22 Collecting iso8601>=0.1.11 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:11.773807 | ubuntu-noble | #7 25.24 Downloading iso8601-2.1.0-py3-none-any.whl.metadata (3.7 kB) 2025-04-18 03:06:11.773815 | ubuntu-noble | #7 25.28 Collecting oslo.i18n>=3.15.3 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:11.773831 | ubuntu-noble | #7 25.29 Downloading oslo.i18n-6.5.1-py3-none-any.whl.metadata (2.1 kB) 2025-04-18 03:06:11.896386 | ubuntu-noble | #7 25.33 Collecting netaddr>=0.10.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:11.896536 | ubuntu-noble | #7 25.35 Downloading netaddr-1.3.0-py3-none-any.whl.metadata (5.0 kB) 2025-04-18 03:06:11.896553 | ubuntu-noble | #7 25.38 Collecting debtcollector>=1.2.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:11.896578 | ubuntu-noble | #7 25.40 Downloading debtcollector-3.0.0-py3-none-any.whl.metadata (2.3 kB) 2025-04-18 03:06:12.090821 | ubuntu-noble | #7 25.45 Collecting pyparsing>=2.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:12.090885 | ubuntu-noble | #7 25.46 Downloading pyparsing-3.2.3-py3-none-any.whl.metadata (5.0 kB) 2025-04-18 03:06:12.090893 | ubuntu-noble | #7 25.50 Collecting packaging>=20.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:12.090909 | ubuntu-noble | #7 25.52 Downloading packaging-24.2-py3-none-any.whl.metadata (3.2 kB) 2025-04-18 03:06:12.256022 | ubuntu-noble | #7 25.56 Collecting tzdata>=2022.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:12.256078 | ubuntu-noble | #7 25.57 Downloading tzdata-2025.2-py2.py3-none-any.whl.metadata (1.4 kB) 2025-04-18 03:06:12.256086 | ubuntu-noble | #7 25.70 Collecting psutil>=3.2.2 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:12.256102 | ubuntu-noble | #7 25.71 Downloading psutil-7.0.0.tar.gz (497 kB) 2025-04-18 03:06:12.325729 | ubuntu-noble | #7 25.93 Installing build dependencies: started 2025-04-18 03:06:15.271889 | ubuntu-noble | #7 28.88 Installing build dependencies: finished with status 'done' 2025-04-18 03:06:15.423622 | ubuntu-noble | #7 28.88 Getting requirements to build wheel: started 2025-04-18 03:06:15.801777 | ubuntu-noble | #7 29.41 Getting requirements to build wheel: finished with status 'done' 2025-04-18 03:06:15.953831 | ubuntu-noble | #7 29.41 Preparing metadata (pyproject.toml): started 2025-04-18 03:06:16.296537 | ubuntu-noble | #7 29.90 Preparing metadata (pyproject.toml): finished with status 'done' 2025-04-18 03:06:16.420863 | ubuntu-noble | #7 29.95 Collecting pbr>=6.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:16.421040 | ubuntu-noble | #7 29.96 Downloading pbr-6.1.1-py2.py3-none-any.whl.metadata (3.4 kB) 2025-04-18 03:06:16.421074 | ubuntu-noble | #7 30.03 Collecting bcrypt>=3.2 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-04-18 03:06:16.549698 | ubuntu-noble | #7 30.05 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl.metadata (10 kB) 2025-04-18 03:06:16.671539 | ubuntu-noble | #7 30.10 Collecting pynacl>=1.5 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-04-18 03:06:16.671638 | ubuntu-noble | #7 30.12 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (8.6 kB) 2025-04-18 03:06:16.671657 | ubuntu-noble | #7 30.16 Collecting pyotp>=2.9.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-18 03:06:16.671686 | ubuntu-noble | #7 30.17 Downloading pyotp-2.9.0-py3-none-any.whl.metadata (9.8 kB) 2025-04-18 03:06:16.823391 | ubuntu-noble | #7 30.22 Collecting construct>=2.10.53 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-18 03:06:16.823617 | ubuntu-noble | #7 30.23 Downloading construct-2.10.70-py3-none-any.whl.metadata (4.2 kB) 2025-04-18 03:06:16.823676 | ubuntu-noble | #7 30.28 Collecting argon2_cffi>=18.1.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-18 03:06:16.823735 | ubuntu-noble | #7 30.30 Downloading argon2_cffi-23.1.0-py3-none-any.whl.metadata (5.2 kB) 2025-04-18 03:06:16.989134 | ubuntu-noble | #7 30.43 Collecting pycryptodomex>=3.6.2 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-18 03:06:16.989239 | ubuntu-noble | #7 30.45 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB) 2025-04-18 03:06:17.073893 | ubuntu-noble | #7 30.68 Collecting lxml (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-18 03:06:17.184237 | ubuntu-noble | #7 30.70 Downloading lxml-5.3.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (3.6 kB) 2025-04-18 03:06:17.306998 | ubuntu-noble | #7 30.73 Collecting colorama (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-18 03:06:17.307496 | ubuntu-noble | #7 30.74 Downloading colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) 2025-04-18 03:06:17.307538 | ubuntu-noble | #7 30.78 Collecting fasteners (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-18 03:06:17.307557 | ubuntu-noble | #7 30.79 Downloading fasteners-0.19-py3-none-any.whl.metadata (4.9 kB) 2025-04-18 03:06:17.307590 | ubuntu-noble | #7 30.83 Collecting sh (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-18 03:06:17.413065 | ubuntu-noble | #7 30.84 Downloading sh-2.2.2-py3-none-any.whl.metadata (3.7 kB) 2025-04-18 03:06:17.413199 | ubuntu-noble | #7 30.91 Collecting ruamel.yaml.clib>=0.2.7 (from ruamel.yaml==0.18.10->-r /tmp/requirements.txt (line 14)) 2025-04-18 03:06:17.413257 | ubuntu-noble | #7 30.93 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (2.7 kB) 2025-04-18 03:06:17.534210 | ubuntu-noble | #7 30.96 Collecting pathspec>=0.5.3 (from yamllint==1.37.0->-r /tmp/requirements.txt (line 15)) 2025-04-18 03:06:17.534314 | ubuntu-noble | #7 30.98 Downloading pathspec-0.12.1-py3-none-any.whl.metadata (21 kB) 2025-04-18 03:06:17.534336 | ubuntu-noble | #7 31.02 Collecting resolvelib<1.1.0,>=0.5.3 (from ansible-core~=2.18.4->ansible==11.4.0->-r /tmp/requirements.txt (line 2)) 2025-04-18 03:06:17.534369 | ubuntu-noble | #7 31.03 Downloading resolvelib-1.0.1-py2.py3-none-any.whl.metadata (4.0 kB) 2025-04-18 03:06:17.687898 | ubuntu-noble | #7 31.06 Collecting argon2-cffi-bindings (from argon2_cffi>=18.1.0->pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-18 03:06:17.688038 | ubuntu-noble | #7 31.08 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (6.7 kB) 2025-04-18 03:06:17.688059 | ubuntu-noble | #7 31.10 Collecting chardet>=3.0.2 (from binaryornot>=0.4.4->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:17.688074 | ubuntu-noble | #7 31.12 Downloading chardet-5.2.0-py3-none-any.whl.metadata (3.4 kB) 2025-04-18 03:06:17.688089 | ubuntu-noble | #7 31.14 Collecting pycparser (from cffi>=1.12->cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-04-18 03:06:17.688116 | ubuntu-noble | #7 31.16 Downloading pycparser-2.22-py3-none-any.whl.metadata (943 bytes) 2025-04-18 03:06:17.800840 | ubuntu-noble | #7 31.29 Collecting wrapt>=1.7.0 (from debtcollector>=1.2.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:17.801004 | ubuntu-noble | #7 31.31 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (6.4 kB) 2025-04-18 03:06:17.966716 | ubuntu-noble | #7 31.41 Collecting MarkupSafe>=2.0 (from Jinja2<4.0.0,>=2.7->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:17.966804 | ubuntu-noble | #7 31.42 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (4.0 kB) 2025-04-18 03:06:18.021722 | ubuntu-noble | #7 31.63 Collecting setuptools (from pbr>=6.1.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-18 03:06:18.225791 | ubuntu-noble | #7 31.64 Downloading setuptools-78.1.0-py3-none-any.whl.metadata (6.6 kB) 2025-04-18 03:06:18.368371 | ubuntu-noble | #7 31.70 Collecting text-unidecode>=1.3 (from python-slugify>=4.0.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.368479 | ubuntu-noble | #7 31.71 Downloading text_unidecode-1.3-py2.py3-none-any.whl.metadata (2.4 kB) 2025-04-18 03:06:18.368490 | ubuntu-noble | #7 31.83 Collecting charset-normalizer<4,>=2 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.368526 | ubuntu-noble | #7 31.84 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (35 kB) 2025-04-18 03:06:18.530322 | ubuntu-noble | #7 31.90 Collecting idna<4,>=2.5 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.530384 | ubuntu-noble | #7 31.91 Downloading idna-3.10-py3-none-any.whl.metadata (10 kB) 2025-04-18 03:06:18.530392 | ubuntu-noble | #7 31.98 Collecting urllib3<3,>=1.21.1 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.530410 | ubuntu-noble | #7 31.99 Downloading urllib3-2.4.0-py3-none-any.whl.metadata (6.5 kB) 2025-04-18 03:06:18.632507 | ubuntu-noble | #7 32.03 Collecting certifi>=2017.4.17 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.632571 | ubuntu-noble | #7 32.04 Downloading certifi-2025.1.31-py3-none-any.whl.metadata (2.5 kB) 2025-04-18 03:06:18.632579 | ubuntu-noble | #7 32.14 Collecting python-dateutil>=2.7.0 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.632597 | ubuntu-noble | #7 32.15 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl.metadata (8.4 kB) 2025-04-18 03:06:18.753204 | ubuntu-noble | #7 32.19 Collecting types-python-dateutil>=2.8.10 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.753298 | ubuntu-noble | #7 32.20 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl.metadata (2.1 kB) 2025-04-18 03:06:18.753315 | ubuntu-noble | #7 32.24 Collecting markdown-it-py>=2.2.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.753338 | ubuntu-noble | #7 32.25 Downloading markdown_it_py-3.0.0-py3-none-any.whl.metadata (6.9 kB) 2025-04-18 03:06:18.894281 | ubuntu-noble | #7 32.30 Collecting pygments<3.0.0,>=2.13.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.894374 | ubuntu-noble | #7 32.31 Downloading pygments-2.19.1-py3-none-any.whl.metadata (2.5 kB) 2025-04-18 03:06:18.894391 | ubuntu-noble | #7 32.36 Collecting mdurl~=0.1 (from markdown-it-py>=2.2.0->rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:18.894422 | ubuntu-noble | #7 32.37 Downloading mdurl-0.1.2-py3-none-any.whl.metadata (1.6 kB) 2025-04-18 03:06:19.094774 | ubuntu-noble | #7 32.41 Collecting six>=1.5 (from python-dateutil>=2.7.0->arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-18 03:06:19.094841 | ubuntu-noble | #7 32.43 Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB) 2025-04-18 03:06:19.094851 | ubuntu-noble | #7 32.50 Downloading PyYAML-6.0.2-cp312-cp312-musllinux_1_1_x86_64.whl (756 kB) 2025-04-18 03:06:19.094866 | ubuntu-noble | #7 32.53 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 756.6/756.6 kB 143.6 MB/s eta 0:00:00 2025-04-18 03:06:20.395584 | ubuntu-noble | #7 32.55 Downloading ansible-11.4.0-py3-none-any.whl (54.2 MB) 2025-04-18 03:06:20.565630 | ubuntu-noble | #7 34.00 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.2/54.2 MB 37.3 MB/s eta 0:00:00 2025-04-18 03:06:20.681470 | ubuntu-noble | #7 34.02 Downloading click-8.1.8-py3-none-any.whl (98 kB) 2025-04-18 03:06:20.681576 | ubuntu-noble | #7 34.04 Downloading cookiecutter-2.6.0-py3-none-any.whl (39 kB) 2025-04-18 03:06:20.681595 | ubuntu-noble | #7 34.06 Downloading cryptography-44.0.2-cp39-abi3-musllinux_1_2_x86_64.whl (4.3 MB) 2025-04-18 03:06:20.681628 | ubuntu-noble | #7 34.17 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.3/4.3 MB 39.9 MB/s eta 0:00:00 2025-04-18 03:06:20.796176 | ubuntu-noble | #7 34.19 Downloading loguru-0.7.3-py3-none-any.whl (61 kB) 2025-04-18 03:06:20.796276 | ubuntu-noble | #7 34.21 Downloading oslo.utils-8.2.0-py3-none-any.whl (134 kB) 2025-04-18 03:06:20.796298 | ubuntu-noble | #7 34.23 Downloading paramiko-3.5.1-py3-none-any.whl (227 kB) 2025-04-18 03:06:20.796313 | ubuntu-noble | #7 34.25 Downloading passlib-1.7.4-py2.py3-none-any.whl (525 kB) 2025-04-18 03:06:20.796328 | ubuntu-noble | #7 34.27 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 525.6/525.6 kB 40.3 MB/s eta 0:00:00 2025-04-18 03:06:20.796343 | ubuntu-noble | #7 34.29 Downloading pycryptodome-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-04-18 03:06:20.796401 | ubuntu-noble | #7 34.35 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 41.3 MB/s eta 0:00:00 2025-04-18 03:06:20.899131 | ubuntu-noble | #7 34.37 Downloading pykeepass-4.1.1.post1-py3-none-any.whl (55 kB) 2025-04-18 03:06:20.899304 | ubuntu-noble | #7 34.38 Downloading python_gilt-1.2.3-py2.py3-none-any.whl (22 kB) 2025-04-18 03:06:20.899324 | ubuntu-noble | #7 34.40 Downloading ruamel.yaml-0.18.10-py3-none-any.whl (117 kB) 2025-04-18 03:06:20.899355 | ubuntu-noble | #7 34.42 Downloading yamllint-1.37.0-py3-none-any.whl (68 kB) 2025-04-18 03:06:21.007389 | ubuntu-noble | #7 34.45 Downloading ansible_core-2.18.4-py3-none-any.whl (2.2 MB) 2025-04-18 03:06:21.007760 | ubuntu-noble | #7 34.51 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.2/2.2 MB 40.7 MB/s eta 0:00:00 2025-04-18 03:06:21.133328 | ubuntu-noble | #7 34.52 Downloading argon2_cffi-23.1.0-py3-none-any.whl (15 kB) 2025-04-18 03:06:21.133408 | ubuntu-noble | #7 34.55 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl (363 kB) 2025-04-18 03:06:21.133420 | ubuntu-noble | #7 34.57 Downloading binaryornot-0.4.4-py2.py3-none-any.whl (9.0 kB) 2025-04-18 03:06:21.133428 | ubuntu-noble | #7 34.59 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl (488 kB) 2025-04-18 03:06:21.133454 | ubuntu-noble | #7 34.61 Downloading construct-2.10.70-py3-none-any.whl (63 kB) 2025-04-18 03:06:21.133473 | ubuntu-noble | #7 34.64 Downloading debtcollector-3.0.0-py3-none-any.whl (23 kB) 2025-04-18 03:06:21.276769 | ubuntu-noble | #7 34.65 Downloading iso8601-2.1.0-py3-none-any.whl (7.5 kB) 2025-04-18 03:06:21.276865 | ubuntu-noble | #7 34.67 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) 2025-04-18 03:06:21.276884 | ubuntu-noble | #7 34.69 Downloading netaddr-1.3.0-py3-none-any.whl (2.3 MB) 2025-04-18 03:06:21.276990 | ubuntu-noble | #7 34.74 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 42.5 MB/s eta 0:00:00 2025-04-18 03:06:21.379416 | ubuntu-noble | #7 34.76 Downloading oslo.i18n-6.5.1-py3-none-any.whl (46 kB) 2025-04-18 03:06:21.379770 | ubuntu-noble | #7 34.77 Downloading packaging-24.2-py3-none-any.whl (65 kB) 2025-04-18 03:06:21.379797 | ubuntu-noble | #7 34.79 Downloading pathspec-0.12.1-py3-none-any.whl (31 kB) 2025-04-18 03:06:21.379812 | ubuntu-noble | #7 34.81 Downloading pbr-6.1.1-py2.py3-none-any.whl (108 kB) 2025-04-18 03:06:21.379827 | ubuntu-noble | #7 34.83 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-04-18 03:06:21.379860 | ubuntu-noble | #7 34.88 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 43.8 MB/s eta 0:00:00 2025-04-18 03:06:21.496209 | ubuntu-noble | #7 34.90 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl (1.1 MB) 2025-04-18 03:06:21.496347 | ubuntu-noble | #7 34.94 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 36.8 MB/s eta 0:00:00 2025-04-18 03:06:21.496361 | ubuntu-noble | #7 34.95 Downloading pyotp-2.9.0-py3-none-any.whl (13 kB) 2025-04-18 03:06:21.496371 | ubuntu-noble | #7 34.97 Downloading pyparsing-3.2.3-py3-none-any.whl (111 kB) 2025-04-18 03:06:21.496381 | ubuntu-noble | #7 34.99 Downloading python_slugify-8.0.4-py2.py3-none-any.whl (10 kB) 2025-04-18 03:06:21.496695 | ubuntu-noble | #7 35.00 Downloading requests-2.32.3-py3-none-any.whl (64 kB) 2025-04-18 03:06:21.656490 | ubuntu-noble | #7 35.02 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl (745 kB) 2025-04-18 03:06:21.656576 | ubuntu-noble | #7 35.05 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 745.8/745.8 kB 32.5 MB/s eta 0:00:00 2025-04-18 03:06:21.656601 | ubuntu-noble | #7 35.06 Downloading tzdata-2025.2-py2.py3-none-any.whl (347 kB) 2025-04-18 03:06:21.656613 | ubuntu-noble | #7 35.08 Downloading arrow-1.3.0-py3-none-any.whl (66 kB) 2025-04-18 03:06:21.656622 | ubuntu-noble | #7 35.10 Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB) 2025-04-18 03:06:21.656644 | ubuntu-noble | #7 35.12 Downloading fasteners-0.19-py3-none-any.whl (18 kB) 2025-04-18 03:06:21.769715 | ubuntu-noble | #7 35.14 Downloading lxml-5.3.2-cp312-cp312-musllinux_1_2_x86_64.whl (5.1 MB) 2025-04-18 03:06:21.769849 | ubuntu-noble | #7 35.26 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.1/5.1 MB 43.5 MB/s eta 0:00:00 2025-04-18 03:06:21.769887 | ubuntu-noble | #7 35.28 Downloading rich-14.0.0-py3-none-any.whl (243 kB) 2025-04-18 03:06:21.871173 | ubuntu-noble | #7 35.30 Downloading sh-2.2.2-py3-none-any.whl (38 kB) 2025-04-18 03:06:21.871265 | ubuntu-noble | #7 35.32 Downloading certifi-2025.1.31-py3-none-any.whl (166 kB) 2025-04-18 03:06:21.871335 | ubuntu-noble | #7 35.34 Downloading chardet-5.2.0-py3-none-any.whl (199 kB) 2025-04-18 03:06:21.871350 | ubuntu-noble | #7 35.36 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl (146 kB) 2025-04-18 03:06:21.871401 | ubuntu-noble | #7 35.38 Downloading idna-3.10-py3-none-any.whl (70 kB) 2025-04-18 03:06:21.871470 | ubuntu-noble | #7 35.40 Downloading markdown_it_py-3.0.0-py3-none-any.whl (87 kB) 2025-04-18 03:06:22.003540 | ubuntu-noble | #7 35.42 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl (23 kB) 2025-04-18 03:06:22.003652 | ubuntu-noble | #7 35.44 Downloading pygments-2.19.1-py3-none-any.whl (1.2 MB) 2025-04-18 03:06:22.003680 | ubuntu-noble | #7 35.48 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 40.8 MB/s eta 0:00:00 2025-04-18 03:06:22.003721 | ubuntu-noble | #7 35.49 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl (229 kB) 2025-04-18 03:06:22.115609 | ubuntu-noble | #7 35.61 Downloading resolvelib-1.0.1-py2.py3-none-any.whl (17 kB) 2025-04-18 03:06:22.115693 | ubuntu-noble | #7 35.63 Downloading text_unidecode-1.3-py2.py3-none-any.whl (78 kB) 2025-04-18 03:06:22.362935 | ubuntu-noble | #7 35.65 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl (14 kB) 2025-04-18 03:06:22.363012 | ubuntu-noble | #7 35.67 Downloading urllib3-2.4.0-py3-none-any.whl (128 kB) 2025-04-18 03:06:22.363021 | ubuntu-noble | #7 35.69 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl (87 kB) 2025-04-18 03:06:22.363027 | ubuntu-noble | #7 35.71 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl (88 kB) 2025-04-18 03:06:22.363032 | ubuntu-noble | #7 35.72 Downloading pycparser-2.22-py3-none-any.whl (117 kB) 2025-04-18 03:06:22.363049 | ubuntu-noble | #7 35.74 Downloading setuptools-78.1.0-py3-none-any.whl (1.3 MB) 2025-04-18 03:06:22.758132 | ubuntu-noble | #7 35.78 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 28.1 MB/s eta 0:00:00 2025-04-18 03:06:22.758194 | ubuntu-noble | #7 35.80 Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) 2025-04-18 03:06:22.758202 | ubuntu-noble | #7 35.82 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB) 2025-04-18 03:06:22.758216 | ubuntu-noble | #7 36.36 Building wheels for collected packages: pwgen, psutil 2025-04-18 03:06:22.910039 | ubuntu-noble | #7 36.37 Building wheel for pwgen (pyproject.toml): started 2025-04-18 03:06:23.160761 | ubuntu-noble | #7 36.77 Building wheel for pwgen (pyproject.toml): finished with status 'done' 2025-04-18 03:06:23.320893 | ubuntu-noble | #7 36.77 Created wheel for pwgen: filename=pwgen-0.8.2.post0-py3-none-any.whl size=3798 sha256=3c73775cfb4694241118a05f185c9da0bec7f098374f476377c86a1027912418 2025-04-18 03:06:26.273031 | ubuntu-noble | #7 36.77 Stored in directory: /tmp/pip-ephem-wheel-cache-f1fptlrr/wheels/8e/56/bf/a88cd4e5b84752858d6db0c914d636211570e8a1e73b53b5dd 2025-04-18 03:06:26.273118 | ubuntu-noble | #7 36.78 Building wheel for psutil (pyproject.toml): started 2025-04-18 03:06:26.273135 | ubuntu-noble | #7 39.88 Building wheel for psutil (pyproject.toml): finished with status 'done' 2025-04-18 03:06:26.442983 | ubuntu-noble | #7 39.89 Created wheel for psutil: filename=psutil-7.0.0-cp36-abi3-linux_x86_64.whl size=277225 sha256=3398750ed221e39544bdfad3d5fde610d8ac801a5e9bc6271ddfec4633266571 2025-04-18 03:06:26.820558 | ubuntu-noble | #7 39.89 Stored in directory: /tmp/pip-ephem-wheel-cache-f1fptlrr/wheels/0c/58/48/ccefe23b905f1dd76f8444f328ff2cfb1d4920a081f9d5d03d 2025-04-18 03:06:26.820677 | ubuntu-noble | #7 39.90 Successfully built pwgen psutil 2025-04-18 03:06:26.820718 | ubuntu-noble | #7 40.43 Installing collected packages: text-unidecode, resolvelib, pwgen, passlib, wrapt, urllib3, tzdata, types-python-dateutil, six, sh, setuptools, ruamel.yaml.clib, PyYAML, python-slugify, pyparsing, pyotp, pygments, pycryptodomex, pycryptodome, pycparser, psutil, pathspec, packaging, netaddr, mdurl, MarkupSafe, lxml, loguru, iso8601, idna, fasteners, construct, colorama, click, charset-normalizer, chardet, certifi, bcrypt, yamllint, ruamel.yaml, requests, python-gilt, python-dateutil, pbr, markdown-it-py, Jinja2, debtcollector, cffi, binaryornot, rich, pynacl, oslo.i18n, cryptography, arrow, argon2-cffi-bindings, paramiko, oslo.utils, cookiecutter, argon2_cffi, ansible-core, pykeepass, ansible 2025-04-18 03:07:20.408243 | ubuntu-noble | #7 94.01 Successfully installed Jinja2-3.1.6 MarkupSafe-3.0.2 PyYAML-6.0.2 ansible-11.4.0 ansible-core-2.18.4 argon2-cffi-bindings-21.2.0 argon2_cffi-23.1.0 arrow-1.3.0 bcrypt-4.3.0 binaryornot-0.4.4 certifi-2025.1.31 cffi-1.17.1 chardet-5.2.0 charset-normalizer-3.4.1 click-8.1.8 colorama-0.4.6 construct-2.10.70 cookiecutter-2.6.0 cryptography-44.0.2 debtcollector-3.0.0 fasteners-0.19 idna-3.10 iso8601-2.1.0 loguru-0.7.3 lxml-5.3.2 markdown-it-py-3.0.0 mdurl-0.1.2 netaddr-1.3.0 oslo.i18n-6.5.1 oslo.utils-8.2.0 packaging-24.2 paramiko-3.5.1 passlib-1.7.4 pathspec-0.12.1 pbr-6.1.1 psutil-7.0.0 pwgen-0.8.2.post0 pycparser-2.22 pycryptodome-3.22.0 pycryptodomex-3.22.0 pygments-2.19.1 pykeepass-4.1.1.post1 pynacl-1.5.0 pyotp-2.9.0 pyparsing-3.2.3 python-dateutil-2.9.0.post0 python-gilt-1.2.3 python-slugify-8.0.4 requests-2.32.3 resolvelib-1.0.1 rich-14.0.0 ruamel.yaml-0.18.10 ruamel.yaml.clib-0.2.12 setuptools-78.1.0 sh-2.2.2 six-1.17.0 text-unidecode-1.3 types-python-dateutil-2.9.0.20241206 tzdata-2025.2 urllib3-2.4.0 wrapt-1.17.2 yamllint-1.37.0 2025-04-18 03:07:20.560870 | ubuntu-noble | #7 94.02 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning. 2025-04-18 03:07:20.813015 | ubuntu-noble | #7 94.42 (1/36) Purging .build-deps (20250418.030549) 2025-04-18 03:07:20.917220 | ubuntu-noble | #7 94.42 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/main: No such file or directory 2025-04-18 03:07:21.038527 | ubuntu-noble | #7 94.42 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/community: No such file or directory 2025-04-18 03:07:21.038580 | ubuntu-noble | #7 94.42 (2/36) Purging build-base (0.5-r3) 2025-04-18 03:07:21.038588 | ubuntu-noble | #7 94.42 (3/36) Purging file (5.46-r2) 2025-04-18 03:07:21.038594 | ubuntu-noble | #7 94.42 (4/36) Purging g++ (14.2.0-r4) 2025-04-18 03:07:21.038600 | ubuntu-noble | #7 94.43 (5/36) Purging libstdc++-dev (14.2.0-r4) 2025-04-18 03:07:21.038606 | ubuntu-noble | #7 94.46 (6/36) Purging make (4.4.1-r2) 2025-04-18 03:07:21.038625 | ubuntu-noble | #7 94.46 (7/36) Purging fortify-headers (1.1-r5) 2025-04-18 03:07:21.038631 | ubuntu-noble | #7 94.46 (8/36) Purging patch (2.7.6-r10) 2025-04-18 03:07:21.038637 | ubuntu-noble | #7 94.46 (9/36) Purging cargo (1.83.0-r0) 2025-04-18 03:07:21.038642 | ubuntu-noble | #7 94.47 (10/36) Purging libffi-dev (3.4.7-r0) 2025-04-18 03:07:21.038648 | ubuntu-noble | #7 94.47 (11/36) Purging linux-headers (6.6-r1) 2025-04-18 03:07:21.038653 | ubuntu-noble | #7 94.49 (12/36) Purging openssl-dev (3.3.3-r0) 2025-04-18 03:07:21.038659 | ubuntu-noble | #7 94.49 (13/36) Purging python3-dev (3.12.10-r0) 2025-04-18 03:07:21.038665 | ubuntu-noble | #7 94.51 (14/36) Purging python3-pyc (3.12.10-r0) 2025-04-18 03:07:21.038670 | ubuntu-noble | #7 94.51 (15/36) Purging python3-pycache-pyc0 (3.12.10-r0) 2025-04-18 03:07:21.038676 | ubuntu-noble | #7 94.52 (16/36) Purging pyc (3.12.10-r0) 2025-04-18 03:07:21.038682 | ubuntu-noble | #7 94.52 (17/36) Purging python3 (3.12.10-r0) 2025-04-18 03:07:21.038693 | ubuntu-noble | #7 94.54 (18/36) Purging rust (1.83.0-r0) 2025-04-18 03:07:21.039081 | ubuntu-noble | #7 94.57 (19/36) Purging gcc (14.2.0-r4) 2025-04-18 03:07:21.197192 | ubuntu-noble | #7 94.61 (20/36) Purging binutils (2.43.1-r2) 2025-04-18 03:07:21.197242 | ubuntu-noble | #7 94.61 (21/36) Purging libatomic (14.2.0-r4) 2025-04-18 03:07:21.197250 | ubuntu-noble | #7 94.61 (22/36) Purging libgomp (14.2.0-r4) 2025-04-18 03:07:21.197256 | ubuntu-noble | #7 94.61 (23/36) Purging musl-dev (1.2.5-r9) 2025-04-18 03:07:21.197262 | ubuntu-noble | #7 94.62 (24/36) Purging isl26 (0.26-r1) 2025-04-18 03:07:21.197280 | ubuntu-noble | #7 94.62 (25/36) Purging jansson (2.14-r4) 2025-04-18 03:07:21.197286 | ubuntu-noble | #7 94.62 (26/36) Purging libmagic (5.46-r2) 2025-04-18 03:07:21.197291 | ubuntu-noble | #7 94.62 (27/36) Purging llvm19-libs (19.1.4-r1) 2025-04-18 03:07:21.197296 | ubuntu-noble | #7 94.65 (28/36) Purging mpc1 (1.3.1-r1) 2025-04-18 03:07:21.197308 | ubuntu-noble | #7 94.65 (29/36) Purging mpdecimal (4.0.0-r0) 2025-04-18 03:07:21.495158 | ubuntu-noble | #7 94.65 (30/36) Purging mpfr4 (4.2.1-r0) 2025-04-18 03:07:21.495274 | ubuntu-noble | #7 94.65 (31/36) Purging pkgconf (2.3.0-r0) 2025-04-18 03:07:21.495295 | ubuntu-noble | #7 94.65 (32/36) Purging scudo-malloc (19.1.4-r0) 2025-04-18 03:07:21.495312 | ubuntu-noble | #7 94.65 (33/36) Purging gmp (6.3.0-r2) 2025-04-18 03:07:21.495327 | ubuntu-noble | #7 94.65 (34/36) Purging libstdc++ (14.2.0-r4) 2025-04-18 03:07:21.495343 | ubuntu-noble | #7 94.65 (35/36) Purging libgcc (14.2.0-r4) 2025-04-18 03:07:21.495359 | ubuntu-noble | #7 94.65 (36/36) Purging libxml2 (2.13.4-r5) 2025-04-18 03:07:21.495375 | ubuntu-noble | #7 94.65 Executing busybox-1.37.0-r12.trigger 2025-04-18 03:07:21.495390 | ubuntu-noble | #7 94.65 OK: 26 MiB in 52 packages 2025-04-18 03:07:21.495420 | ubuntu-noble | #7 DONE 95.1s 2025-04-18 03:07:21.650064 | ubuntu-noble | 2025-04-18 03:07:21.667868 | ubuntu-noble | #8 [4/5] COPY . /data 2025-04-18 03:07:21.667995 | ubuntu-noble | #8 DONE 0.2s 2025-04-18 03:07:21.888895 | ubuntu-noble | 2025-04-18 03:07:29.359533 | ubuntu-noble | #9 [5/5] WORKDIR /data 2025-04-18 03:07:29.359625 | ubuntu-noble | #9 DONE 0.1s 2025-04-18 03:07:29.359642 | ubuntu-noble | 2025-04-18 03:07:29.359658 | ubuntu-noble | #10 exporting to image 2025-04-18 03:07:29.359670 | ubuntu-noble | #10 exporting layers 2025-04-18 03:07:29.359698 | ubuntu-noble | #10 exporting layers 7.6s done 2025-04-18 03:07:29.492333 | ubuntu-noble | #10 writing image sha256:54ea4a3dbf22d33a2ff075ff4579ca56762c4f872b44207a72a783eb02d2eaaa done 2025-04-18 03:07:29.503433 | ubuntu-noble | #10 naming to docker.io/library/724942f done 2025-04-18 03:07:29.503684 | ubuntu-noble | #10 DONE 7.7s 2025-04-18 03:07:29.557692 | ubuntu-noble | changed 2025-04-18 03:07:29.569508 | 2025-04-18 03:07:29.569635 | TASK [Run push script] 2025-04-18 03:07:29.883727 | ubuntu-noble | ++ git rev-parse --short HEAD 2025-04-18 03:07:29.885691 | ubuntu-noble | + revision=724942f 2025-04-18 03:07:29.885724 | ubuntu-noble | + [[ -n osism.harbor.regio.digital ]] 2025-04-18 03:07:29.885733 | ubuntu-noble | + repository=osism.harbor.regio.digital/osism/cookiecutter 2025-04-18 03:07:29.885756 | ubuntu-noble | + docker tag 724942f osism.harbor.regio.digital/osism/cookiecutter:latest 2025-04-18 03:07:29.919522 | ubuntu-noble | + docker push osism.harbor.regio.digital/osism/cookiecutter:latest 2025-04-18 03:07:29.945665 | ubuntu-noble | The push refers to repository [osism.harbor.regio.digital/osism/cookiecutter] 2025-04-18 03:07:29.982994 | ubuntu-noble | 5f70bf18a086: Preparing 2025-04-18 03:07:29.984265 | ubuntu-noble | eb5ab788cca1: Preparing 2025-04-18 03:07:29.984397 | ubuntu-noble | 6bdcd6e50e31: Preparing 2025-04-18 03:07:29.985331 | ubuntu-noble | b6ca96baaa60: Preparing 2025-04-18 03:07:29.985502 | ubuntu-noble | c5f83227c988: Preparing 2025-04-18 03:07:29.985584 | ubuntu-noble | 5a73889e102c: Preparing 2025-04-18 03:07:29.985657 | ubuntu-noble | 2748e349efd5: Preparing 2025-04-18 03:07:29.985727 | ubuntu-noble | 08000c18d16d: Preparing 2025-04-18 03:07:29.985772 | ubuntu-noble | 2748e349efd5: Waiting 2025-04-18 03:07:29.985845 | ubuntu-noble | 5a73889e102c: Waiting 2025-04-18 03:07:29.985924 | ubuntu-noble | 08000c18d16d: Waiting 2025-04-18 03:07:32.023316 | ubuntu-noble | c5f83227c988: Layer already exists 2025-04-18 03:07:32.791728 | ubuntu-noble | 5a73889e102c: Layer already exists 2025-04-18 03:07:33.664884 | ubuntu-noble | 2748e349efd5: Layer already exists 2025-04-18 03:07:34.208853 | ubuntu-noble | 08000c18d16d: Layer already exists 2025-04-18 03:07:38.039763 | ubuntu-noble | b6ca96baaa60: Pushed 2025-04-18 03:07:38.600864 | ubuntu-noble | 5f70bf18a086: Pushed 2025-04-18 03:07:38.880729 | ubuntu-noble | eb5ab788cca1: Pushed 2025-04-18 03:08:12.660090 | ubuntu-noble | 6bdcd6e50e31: Pushed 2025-04-18 03:08:20.117022 | ubuntu-noble | latest: digest: sha256:dc7f5325ff1d3eccdae509cb0025a74a793b2d453f4ed2f48ef69e4922505e4e size: 1993 2025-04-18 03:08:20.177655 | ubuntu-noble | changed 2025-04-18 03:08:20.204501 | 2025-04-18 03:08:20.204585 | PLAY RECAP 2025-04-18 03:08:20.204636 | ubuntu-noble | ok: 3 changed: 3 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-04-18 03:08:20.204660 | 2025-04-18 03:08:20.295695 | RUN END RESULT_NORMAL: [untrusted : github.com/osism/cfg-cookiecutter/playbooks/build.yml@main] 2025-04-18 03:08:20.298872 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-04-18 03:08:20.913628 | 2025-04-18 03:08:20.913803 | PLAY [Base post] 2025-04-18 03:08:20.937660 | 2025-04-18 03:08:20.937775 | TASK [remove-build-sshkey : Remove the build SSH key from all nodes] 2025-04-18 03:08:21.689179 | ubuntu-noble | changed 2025-04-18 03:08:21.720359 | 2025-04-18 03:08:21.720475 | PLAY RECAP 2025-04-18 03:08:21.720541 | ubuntu-noble | ok: 1 changed: 1 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-04-18 03:08:21.720602 | 2025-04-18 03:08:21.808242 | POST-RUN END RESULT_NORMAL: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-04-18 03:08:21.816694 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post-logs.yaml@main] 2025-04-18 03:08:22.570935 | 2025-04-18 03:08:22.571067 | PLAY [Base post-logs] 2025-04-18 03:08:22.596308 | 2025-04-18 03:08:22.596454 | TASK [generate-zuul-manifest : Generate Zuul manifest] 2025-04-18 03:08:23.155327 | localhost | changed 2025-04-18 03:08:23.159046 | 2025-04-18 03:08:23.159173 | TASK [generate-zuul-manifest : Return Zuul manifest URL to Zuul] 2025-04-18 03:08:23.226565 | localhost | ok 2025-04-18 03:08:23.232140 | 2025-04-18 03:08:23.232241 | TASK [Set zuul-log-path fact] 2025-04-18 03:08:23.268730 | localhost | ok 2025-04-18 03:08:23.278927 | 2025-04-18 03:08:23.279035 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-04-18 03:08:23.340191 | localhost | ok 2025-04-18 03:08:23.346101 | 2025-04-18 03:08:23.346198 | TASK [upload-logs : Create log directories] 2025-04-18 03:08:23.963792 | localhost | changed 2025-04-18 03:08:23.968245 | 2025-04-18 03:08:23.968348 | TASK [upload-logs : Ensure logs are readable before uploading] 2025-04-18 03:08:24.970487 | localhost -> localhost | ok: Runtime: 0:00:00.036906 2025-04-18 03:08:24.976617 | 2025-04-18 03:08:24.976723 | TASK [upload-logs : Upload logs to log server] 2025-04-18 03:08:26.407424 | localhost | Output suppressed because no_log was given 2025-04-18 03:08:26.410571 | 2025-04-18 03:08:26.410665 | LOOP [upload-logs : Compress console log and json output] 2025-04-18 03:08:26.558019 | localhost | skipping: Conditional result was False 2025-04-18 03:08:26.607993 | localhost | skipping: Conditional result was False 2025-04-18 03:08:26.619707 | 2025-04-18 03:08:26.619816 | LOOP [upload-logs : Upload compressed console log and json output] 2025-04-18 03:08:26.721435 | localhost | skipping: Conditional result was False 2025-04-18 03:08:26.721741 | 2025-04-18 03:08:26.730814 | localhost | skipping: Conditional result was False 2025-04-18 03:08:26.743563 | 2025-04-18 03:08:26.743669 | LOOP [upload-logs : Upload console log and json output]