2025-04-12 03:04:58.067711 | Job console starting... 2025-04-12 03:04:58.082187 | Updating repositories 2025-04-12 03:04:58.120732 | Preparing job workspace 2025-04-12 03:04:59.979359 | Running Ansible setup... 2025-04-12 03:05:07.358733 | PRE-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/pre.yaml@main] 2025-04-12 03:05:08.316247 | 2025-04-12 03:05:08.316490 | PLAY [Base pre] 2025-04-12 03:05:08.382057 | 2025-04-12 03:05:08.382213 | TASK [Setup log path fact] 2025-04-12 03:05:08.423978 | ubuntu-noble | ok 2025-04-12 03:05:08.471354 | 2025-04-12 03:05:08.471488 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-04-12 03:05:08.513890 | ubuntu-noble | ok 2025-04-12 03:05:08.537000 | 2025-04-12 03:05:08.537100 | TASK [emit-job-header : Print job information] 2025-04-12 03:05:08.586746 | # Job Information 2025-04-12 03:05:08.586886 | Ansible Version: 2.15.3 2025-04-12 03:05:08.586914 | Job: container-image-cfg-cookiecutter-push 2025-04-12 03:05:08.586940 | Pipeline: periodic-daily 2025-04-12 03:05:08.586958 | Executor: 7d211f194f6a 2025-04-12 03:05:08.586974 | Triggered by: https://github.com/osism/cfg-cookiecutter 2025-04-12 03:05:08.586989 | Event ID: e4289a303a6d4f47a6b795b5dec7e44c 2025-04-12 03:05:08.593834 | 2025-04-12 03:05:08.593934 | LOOP [emit-job-header : Print node information] 2025-04-12 03:05:08.826654 | ubuntu-noble | ok: 2025-04-12 03:05:08.826785 | ubuntu-noble | # Node Information 2025-04-12 03:05:08.826812 | ubuntu-noble | Inventory Hostname: ubuntu-noble 2025-04-12 03:05:08.826832 | ubuntu-noble | Hostname: ubuntu 2025-04-12 03:05:08.826851 | ubuntu-noble | Username: zuul 2025-04-12 03:05:08.826868 | ubuntu-noble | Distro: Ubuntu 24.04 2025-04-12 03:05:08.826888 | ubuntu-noble | Provider: regiocloud-a 2025-04-12 03:05:08.826905 | ubuntu-noble | Label: ubuntu-noble 2025-04-12 03:05:08.826922 | ubuntu-noble | Product Name: OpenStack Nova 2025-04-12 03:05:08.826939 | ubuntu-noble | Interface IP: 81.163.192.24 2025-04-12 03:05:08.849610 | 2025-04-12 03:05:08.849709 | TASK [log-inventory : Ensure Zuul Ansible directory exists] 2025-04-12 03:05:09.429612 | ubuntu-noble -> localhost | changed 2025-04-12 03:05:09.441292 | 2025-04-12 03:05:09.441422 | TASK [log-inventory : Copy ansible inventory to logs dir] 2025-04-12 03:05:10.605160 | ubuntu-noble -> localhost | changed 2025-04-12 03:05:10.628368 | 2025-04-12 03:05:10.628509 | TASK [add-build-sshkey : Check to see if ssh key was already created for this build] 2025-04-12 03:05:10.885645 | ubuntu-noble -> localhost | ok 2025-04-12 03:05:10.900885 | 2025-04-12 03:05:10.901024 | TASK [add-build-sshkey : Create a new key in workspace based on build UUID] 2025-04-12 03:05:10.948198 | ubuntu-noble | ok 2025-04-12 03:05:10.968782 | ubuntu-noble | included: /var/lib/zuul/builds/bd95ff6998d24b889cb74ac114ec762a/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/create-key-and-replace.yaml 2025-04-12 03:05:10.976725 | 2025-04-12 03:05:10.976822 | TASK [add-build-sshkey : Create Temp SSH key] 2025-04-12 03:05:11.625408 | ubuntu-noble -> localhost | Generating public/private rsa key pair. 2025-04-12 03:05:11.625619 | ubuntu-noble -> localhost | Your identification has been saved in /var/lib/zuul/builds/bd95ff6998d24b889cb74ac114ec762a/work/bd95ff6998d24b889cb74ac114ec762a_id_rsa 2025-04-12 03:05:11.625658 | ubuntu-noble -> localhost | Your public key has been saved in /var/lib/zuul/builds/bd95ff6998d24b889cb74ac114ec762a/work/bd95ff6998d24b889cb74ac114ec762a_id_rsa.pub 2025-04-12 03:05:11.625684 | ubuntu-noble -> localhost | The key fingerprint is: 2025-04-12 03:05:11.625708 | ubuntu-noble -> localhost | SHA256:rehc1Q8L9/cbq7KCKaMGzXTANUTLH8BijpzXFy0h1YY zuul-build-sshkey 2025-04-12 03:05:11.625730 | ubuntu-noble -> localhost | The key's randomart image is: 2025-04-12 03:05:11.625751 | ubuntu-noble -> localhost | +---[RSA 3072]----+ 2025-04-12 03:05:11.625771 | ubuntu-noble -> localhost | | . =B.o= | 2025-04-12 03:05:11.625791 | ubuntu-noble -> localhost | | =..=E + | 2025-04-12 03:05:11.625811 | ubuntu-noble -> localhost | |. = +o .+ | 2025-04-12 03:05:11.625840 | ubuntu-noble -> localhost | | + + o.... . | 2025-04-12 03:05:11.625861 | ubuntu-noble -> localhost | | = . ..S + + | 2025-04-12 03:05:11.625881 | ubuntu-noble -> localhost | | . o . o o = | 2025-04-12 03:05:11.625906 | ubuntu-noble -> localhost | | . . = . o..| 2025-04-12 03:05:11.625927 | ubuntu-noble -> localhost | | . = + . . .+| 2025-04-12 03:05:11.625948 | ubuntu-noble -> localhost | | ... = ..o..oo| 2025-04-12 03:05:11.625968 | ubuntu-noble -> localhost | +----[SHA256]-----+ 2025-04-12 03:05:11.626018 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.185619 2025-04-12 03:05:11.634550 | 2025-04-12 03:05:11.634644 | TASK [add-build-sshkey : Remote setup ssh keys (linux)] 2025-04-12 03:05:11.664651 | ubuntu-noble | ok 2025-04-12 03:05:11.684543 | ubuntu-noble | included: /var/lib/zuul/builds/bd95ff6998d24b889cb74ac114ec762a/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/remote-linux.yaml 2025-04-12 03:05:11.696182 | 2025-04-12 03:05:11.696275 | TASK [add-build-sshkey : Remove previously added zuul-build-sshkey] 2025-04-12 03:05:11.720619 | ubuntu-noble | skipping: Conditional result was False 2025-04-12 03:05:11.728042 | 2025-04-12 03:05:11.728146 | TASK [add-build-sshkey : Enable access via build key on all nodes] 2025-04-12 03:05:12.395935 | ubuntu-noble | changed 2025-04-12 03:05:12.403000 | 2025-04-12 03:05:12.403103 | TASK [add-build-sshkey : Make sure user has a .ssh] 2025-04-12 03:05:12.712028 | ubuntu-noble | ok 2025-04-12 03:05:12.729745 | 2025-04-12 03:05:12.729907 | TASK [add-build-sshkey : Install build private key as SSH key on all nodes] 2025-04-12 03:05:13.442004 | ubuntu-noble | changed 2025-04-12 03:05:13.449198 | 2025-04-12 03:05:13.449293 | TASK [add-build-sshkey : Install build public key as SSH key on all nodes] 2025-04-12 03:05:14.210507 | ubuntu-noble | changed 2025-04-12 03:05:14.219571 | 2025-04-12 03:05:14.219672 | TASK [add-build-sshkey : Remote setup ssh keys (windows)] 2025-04-12 03:05:14.254911 | ubuntu-noble | skipping: Conditional result was False 2025-04-12 03:05:14.269933 | 2025-04-12 03:05:14.270053 | TASK [remove-zuul-sshkey : Remove master key from local agent] 2025-04-12 03:05:14.692253 | ubuntu-noble -> localhost | changed 2025-04-12 03:05:14.706353 | 2025-04-12 03:05:14.706458 | TASK [add-build-sshkey : Add back temp key] 2025-04-12 03:05:15.015725 | ubuntu-noble -> localhost | Identity added: /var/lib/zuul/builds/bd95ff6998d24b889cb74ac114ec762a/work/bd95ff6998d24b889cb74ac114ec762a_id_rsa (zuul-build-sshkey) 2025-04-12 03:05:15.015959 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.008153 2025-04-12 03:05:15.025164 | 2025-04-12 03:05:15.025261 | TASK [add-build-sshkey : Verify we can still SSH to all nodes] 2025-04-12 03:05:15.492588 | ubuntu-noble | ok 2025-04-12 03:05:15.500342 | 2025-04-12 03:05:15.500492 | TASK [add-build-sshkey : Verify we can still SSH to all nodes (windows)] 2025-04-12 03:05:15.525106 | ubuntu-noble | skipping: Conditional result was False 2025-04-12 03:05:15.540349 | 2025-04-12 03:05:15.540468 | TASK [start-zuul-console : Start zuul_console daemon.] 2025-04-12 03:05:16.011385 | ubuntu-noble | ok 2025-04-12 03:05:16.063521 | 2025-04-12 03:05:16.063619 | TASK [validate-host : Define zuul_info_dir fact] 2025-04-12 03:05:16.121589 | ubuntu-noble | ok 2025-04-12 03:05:16.136057 | 2025-04-12 03:05:16.136163 | TASK [validate-host : Ensure Zuul Ansible directory exists] 2025-04-12 03:05:16.500611 | ubuntu-noble -> localhost | ok 2025-04-12 03:05:16.511849 | 2025-04-12 03:05:16.511976 | TASK [validate-host : Collect information about the host] 2025-04-12 03:05:17.680803 | ubuntu-noble | ok 2025-04-12 03:05:17.696161 | 2025-04-12 03:05:17.696296 | TASK [validate-host : Sanitize hostname] 2025-04-12 03:05:17.774867 | ubuntu-noble | ok 2025-04-12 03:05:17.786025 | 2025-04-12 03:05:17.786246 | TASK [validate-host : Write out all ansible variables/facts known for each host] 2025-04-12 03:05:18.428691 | ubuntu-noble -> localhost | changed 2025-04-12 03:05:18.437211 | 2025-04-12 03:05:18.437371 | TASK [validate-host : Collect information about zuul worker] 2025-04-12 03:05:18.950869 | ubuntu-noble | ok 2025-04-12 03:05:18.959718 | 2025-04-12 03:05:18.959847 | TASK [validate-host : Write out all zuul information for each host] 2025-04-12 03:05:19.678428 | ubuntu-noble -> localhost | changed 2025-04-12 03:05:19.693472 | 2025-04-12 03:05:19.693602 | TASK [prepare-workspace-log : Start zuul_console daemon.] 2025-04-12 03:05:20.009516 | ubuntu-noble | ok 2025-04-12 03:05:20.029102 | 2025-04-12 03:05:20.029238 | TASK [prepare-workspace-log : Synchronize src repos to workspace directory.] 2025-04-12 03:05:21.090233 | ubuntu-noble | changed: 2025-04-12 03:05:21.090559 | ubuntu-noble | cd+++++++++ src/ 2025-04-12 03:05:21.090622 | ubuntu-noble | cd+++++++++ src/github.com/ 2025-04-12 03:05:21.090669 | ubuntu-noble | cd+++++++++ src/github.com/osism/ 2025-04-12 03:05:21.090836 | ubuntu-noble | cd+++++++++ src/github.com/osism/cfg-cookiecutter/ 2025-04-12 03:05:21.090880 | ubuntu-noble | Containerfile 2025-04-12 03:05:21.091123 | ubuntu-noble | -r /tmp/requirements.txt (line 2)) 2025-04-12 03:06:39.662798 | ubuntu-noble | #7 21.13 Downloading ansible_core-2.18.4-py3-none-any.whl.metadata (7.7 kB) 2025-04-12 03:06:39.788851 | ubuntu-noble | #7 21.16 Collecting binaryornot>=0.4.4 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:39.788959 | ubuntu-noble | #7 21.18 Downloading binaryornot-0.4.4-py2.py3-none-any.whl.metadata (6.0 kB) 2025-04-12 03:06:39.788976 | ubuntu-noble | #7 21.23 Collecting Jinja2<4.0.0,>=2.7 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:39.789000 | ubuntu-noble | #7 21.25 Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB) 2025-04-12 03:06:39.929778 | ubuntu-noble | #7 21.29 Collecting python-slugify>=4.0.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:39.929858 | ubuntu-noble | #7 21.30 Downloading python_slugify-8.0.4-py2.py3-none-any.whl.metadata (8.5 kB) 2025-04-12 03:06:39.929874 | ubuntu-noble | #7 21.36 Collecting requests>=2.23.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:39.929936 | ubuntu-noble | #7 21.37 Downloading requests-2.32.3-py3-none-any.whl.metadata (4.6 kB) 2025-04-12 03:06:40.090798 | ubuntu-noble | #7 21.40 Collecting arrow (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:40.091000 | ubuntu-noble | #7 21.42 Downloading arrow-1.3.0-py3-none-any.whl.metadata (7.5 kB) 2025-04-12 03:06:40.091022 | ubuntu-noble | #7 21.50 Collecting rich (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:40.091098 | ubuntu-noble | #7 21.51 Downloading rich-14.0.0-py3-none-any.whl.metadata (18 kB) 2025-04-12 03:06:40.219488 | ubuntu-noble | #7 21.66 Collecting cffi>=1.12 (from cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-04-12 03:06:40.219607 | ubuntu-noble | #7 21.68 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (1.5 kB) 2025-04-12 03:06:40.323985 | ubuntu-noble | #7 21.73 Collecting iso8601>=0.1.11 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:40.324101 | ubuntu-noble | #7 21.75 Downloading iso8601-2.1.0-py3-none-any.whl.metadata (3.7 kB) 2025-04-12 03:06:40.324119 | ubuntu-noble | #7 21.79 Collecting oslo.i18n>=3.15.3 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:40.324149 | ubuntu-noble | #7 21.80 Downloading oslo.i18n-6.5.1-py3-none-any.whl.metadata (2.1 kB) 2025-04-12 03:06:40.454994 | ubuntu-noble | #7 21.83 Collecting netaddr>=0.10.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:40.455078 | ubuntu-noble | #7 21.85 Downloading netaddr-1.3.0-py3-none-any.whl.metadata (5.0 kB) 2025-04-12 03:06:40.455094 | ubuntu-noble | #7 21.89 Collecting debtcollector>=1.2.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:40.455146 | ubuntu-noble | #7 21.91 Downloading debtcollector-3.0.0-py3-none-any.whl.metadata (2.3 kB) 2025-04-12 03:06:40.634706 | ubuntu-noble | #7 21.97 Collecting pyparsing>=2.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:40.634954 | ubuntu-noble | #7 21.98 Downloading pyparsing-3.2.3-py3-none-any.whl.metadata (5.0 kB) 2025-04-12 03:06:40.634980 | ubuntu-noble | #7 22.02 Collecting packaging>=20.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:40.635009 | ubuntu-noble | #7 22.04 Downloading packaging-24.2-py3-none-any.whl.metadata (3.2 kB) 2025-04-12 03:06:40.799743 | ubuntu-noble | #7 22.08 Collecting tzdata>=2022.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:40.799837 | ubuntu-noble | #7 22.09 Downloading tzdata-2025.2-py2.py3-none-any.whl.metadata (1.4 kB) 2025-04-12 03:06:40.799856 | ubuntu-noble | #7 22.20 Collecting psutil>=3.2.2 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:40.799925 | ubuntu-noble | #7 22.22 Downloading psutil-7.0.0.tar.gz (497 kB) 2025-04-12 03:06:40.818647 | ubuntu-noble | #7 22.39 Installing build dependencies: started 2025-04-12 03:06:43.343301 | ubuntu-noble | #7 24.91 Installing build dependencies: finished with status 'done' 2025-04-12 03:06:43.495084 | ubuntu-noble | #7 24.91 Getting requirements to build wheel: started 2025-04-12 03:06:43.764382 | ubuntu-noble | #7 25.33 Getting requirements to build wheel: finished with status 'done' 2025-04-12 03:06:44.188032 | ubuntu-noble | #7 25.33 Preparing metadata (pyproject.toml): started 2025-04-12 03:06:44.188128 | ubuntu-noble | #7 25.76 Preparing metadata (pyproject.toml): finished with status 'done' 2025-04-12 03:06:44.343126 | ubuntu-noble | #7 25.84 Collecting pbr>=6.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:44.462967 | ubuntu-noble | #7 25.85 Downloading pbr-6.1.1-py2.py3-none-any.whl.metadata (3.4 kB) 2025-04-12 03:06:44.463024 | ubuntu-noble | #7 25.91 Collecting bcrypt>=3.2 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-04-12 03:06:44.463051 | ubuntu-noble | #7 25.93 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl.metadata (10 kB) 2025-04-12 03:06:44.568760 | ubuntu-noble | #7 25.99 Collecting pynacl>=1.5 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-04-12 03:06:44.568855 | ubuntu-noble | #7 26.00 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (8.6 kB) 2025-04-12 03:06:44.568901 | ubuntu-noble | #7 26.03 Collecting pyotp>=2.9.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-12 03:06:44.568936 | ubuntu-noble | #7 26.05 Downloading pyotp-2.9.0-py3-none-any.whl.metadata (9.8 kB) 2025-04-12 03:06:44.718625 | ubuntu-noble | #7 26.08 Collecting construct>=2.10.53 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-12 03:06:44.718996 | ubuntu-noble | #7 26.09 Downloading construct-2.10.70-py3-none-any.whl.metadata (4.2 kB) 2025-04-12 03:06:44.719207 | ubuntu-noble | #7 26.12 Collecting argon2_cffi>=18.1.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-12 03:06:44.719280 | ubuntu-noble | #7 26.14 Downloading argon2_cffi-23.1.0-py3-none-any.whl.metadata (5.2 kB) 2025-04-12 03:06:44.719358 | ubuntu-noble | #7 26.29 Collecting pycryptodomex>=3.6.2 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-12 03:06:44.883484 | ubuntu-noble | #7 26.30 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB) 2025-04-12 03:06:44.979450 | ubuntu-noble | #7 26.55 Collecting lxml (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-12 03:06:45.095330 | ubuntu-noble | #7 26.56 Downloading lxml-5.3.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (3.6 kB) 2025-04-12 03:06:45.204217 | ubuntu-noble | #7 26.59 Collecting colorama (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-12 03:06:45.204276 | ubuntu-noble | #7 26.61 Downloading colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) 2025-04-12 03:06:45.204282 | ubuntu-noble | #7 26.65 Collecting fasteners (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-12 03:06:45.204287 | ubuntu-noble | #7 26.66 Downloading fasteners-0.19-py3-none-any.whl.metadata (4.9 kB) 2025-04-12 03:06:45.204299 | ubuntu-noble | #7 26.70 Collecting sh (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-12 03:06:45.306703 | ubuntu-noble | #7 26.72 Downloading sh-2.2.2-py3-none-any.whl.metadata (3.7 kB) 2025-04-12 03:06:45.306829 | ubuntu-noble | #7 26.77 Collecting ruamel.yaml.clib>=0.2.7 (from ruamel.yaml==0.18.10->-r /tmp/requirements.txt (line 14)) 2025-04-12 03:06:45.306864 | ubuntu-noble | #7 26.79 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (2.7 kB) 2025-04-12 03:06:45.416015 | ubuntu-noble | #7 26.81 Collecting pathspec>=0.5.3 (from yamllint==1.37.0->-r /tmp/requirements.txt (line 15)) 2025-04-12 03:06:45.416102 | ubuntu-noble | #7 26.83 Downloading pathspec-0.12.1-py3-none-any.whl.metadata (21 kB) 2025-04-12 03:06:45.416120 | ubuntu-noble | #7 26.88 Collecting resolvelib<1.1.0,>=0.5.3 (from ansible-core~=2.18.4->ansible==11.4.0->-r /tmp/requirements.txt (line 2)) 2025-04-12 03:06:45.416149 | ubuntu-noble | #7 26.89 Downloading resolvelib-1.0.1-py2.py3-none-any.whl.metadata (4.0 kB) 2025-04-12 03:06:45.589851 | ubuntu-noble | #7 26.93 Collecting argon2-cffi-bindings (from argon2_cffi>=18.1.0->pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-12 03:06:45.589958 | ubuntu-noble | #7 26.95 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (6.7 kB) 2025-04-12 03:06:45.589974 | ubuntu-noble | #7 26.98 Collecting chardet>=3.0.2 (from binaryornot>=0.4.4->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:45.589997 | ubuntu-noble | #7 27.00 Downloading chardet-5.2.0-py3-none-any.whl.metadata (3.4 kB) 2025-04-12 03:06:45.702518 | ubuntu-noble | #7 27.03 Collecting pycparser (from cffi>=1.12->cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-04-12 03:06:45.702583 | ubuntu-noble | #7 27.04 Downloading pycparser-2.22-py3-none-any.whl.metadata (943 bytes) 2025-04-12 03:06:45.702595 | ubuntu-noble | #7 27.16 Collecting wrapt>=1.7.0 (from debtcollector>=1.2.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:45.702613 | ubuntu-noble | #7 27.17 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (6.4 kB) 2025-04-12 03:06:45.904951 | ubuntu-noble | #7 27.26 Collecting MarkupSafe>=2.0 (from Jinja2<4.0.0,>=2.7->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:45.905031 | ubuntu-noble | #7 27.27 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (4.0 kB) 2025-04-12 03:06:45.905056 | ubuntu-noble | #7 27.47 Collecting setuptools (from pbr>=6.1.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-12 03:06:46.086078 | ubuntu-noble | #7 27.49 Downloading setuptools-78.1.0-py3-none-any.whl.metadata (6.6 kB) 2025-04-12 03:06:46.214289 | ubuntu-noble | #7 27.54 Collecting text-unidecode>=1.3 (from python-slugify>=4.0.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.214334 | ubuntu-noble | #7 27.55 Downloading text_unidecode-1.3-py2.py3-none-any.whl.metadata (2.4 kB) 2025-04-12 03:06:46.214342 | ubuntu-noble | #7 27.65 Collecting charset-normalizer<4,>=2 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.214354 | ubuntu-noble | #7 27.67 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (35 kB) 2025-04-12 03:06:46.344219 | ubuntu-noble | #7 27.71 Collecting idna<4,>=2.5 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.344267 | ubuntu-noble | #7 27.73 Downloading idna-3.10-py3-none-any.whl.metadata (10 kB) 2025-04-12 03:06:46.344274 | ubuntu-noble | #7 27.78 Collecting urllib3<3,>=1.21.1 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.344287 | ubuntu-noble | #7 27.80 Downloading urllib3-2.4.0-py3-none-any.whl.metadata (6.5 kB) 2025-04-12 03:06:46.454531 | ubuntu-noble | #7 27.83 Collecting certifi>=2017.4.17 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.454574 | ubuntu-noble | #7 27.85 Downloading certifi-2025.1.31-py3-none-any.whl.metadata (2.5 kB) 2025-04-12 03:06:46.454580 | ubuntu-noble | #7 27.91 Collecting python-dateutil>=2.7.0 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.454593 | ubuntu-noble | #7 27.93 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl.metadata (8.4 kB) 2025-04-12 03:06:46.563355 | ubuntu-noble | #7 27.96 Collecting types-python-dateutil>=2.8.10 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.563395 | ubuntu-noble | #7 27.97 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl.metadata (2.1 kB) 2025-04-12 03:06:46.563403 | ubuntu-noble | #7 28.01 Collecting markdown-it-py>=2.2.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.563409 | ubuntu-noble | #7 28.02 Downloading markdown_it_py-3.0.0-py3-none-any.whl.metadata (6.9 kB) 2025-04-12 03:06:46.563495 | ubuntu-noble | #7 28.07 Collecting pygments<3.0.0,>=2.13.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.563508 | ubuntu-noble | #7 28.08 Downloading pygments-2.19.1-py3-none-any.whl.metadata (2.5 kB) 2025-04-12 03:06:46.674634 | ubuntu-noble | #7 28.12 Collecting mdurl~=0.1 (from markdown-it-py>=2.2.0->rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.674683 | ubuntu-noble | #7 28.13 Downloading mdurl-0.1.2-py3-none-any.whl.metadata (1.6 kB) 2025-04-12 03:06:46.674704 | ubuntu-noble | #7 28.17 Collecting six>=1.5 (from python-dateutil>=2.7.0->arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-12 03:06:46.889708 | ubuntu-noble | #7 28.18 Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB) 2025-04-12 03:06:46.889815 | ubuntu-noble | #7 28.24 Downloading PyYAML-6.0.2-cp312-cp312-musllinux_1_1_x86_64.whl (756 kB) 2025-04-12 03:06:46.889848 | ubuntu-noble | #7 28.29 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 756.6/756.6 kB 26.1 MB/s eta 0:00:00 2025-04-12 03:06:48.313999 | ubuntu-noble | #7 28.31 Downloading ansible-11.4.0-py3-none-any.whl (54.2 MB) 2025-04-12 03:06:48.490326 | ubuntu-noble | #7 29.88 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.2/54.2 MB 34.4 MB/s eta 0:00:00 2025-04-12 03:06:48.598725 | ubuntu-noble | #7 29.90 Downloading click-8.1.8-py3-none-any.whl (98 kB) 2025-04-12 03:06:48.599038 | ubuntu-noble | #7 29.92 Downloading cookiecutter-2.6.0-py3-none-any.whl (39 kB) 2025-04-12 03:06:48.599058 | ubuntu-noble | #7 29.94 Downloading cryptography-44.0.2-cp39-abi3-musllinux_1_2_x86_64.whl (4.3 MB) 2025-04-12 03:06:48.599074 | ubuntu-noble | #7 30.06 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.3/4.3 MB 37.2 MB/s eta 0:00:00 2025-04-12 03:06:48.599102 | ubuntu-noble | #7 30.07 Downloading loguru-0.7.3-py3-none-any.whl (61 kB) 2025-04-12 03:06:48.716507 | ubuntu-noble | #7 30.09 Downloading oslo.utils-8.2.0-py3-none-any.whl (134 kB) 2025-04-12 03:06:48.716580 | ubuntu-noble | #7 30.11 Downloading paramiko-3.5.1-py3-none-any.whl (227 kB) 2025-04-12 03:06:48.716596 | ubuntu-noble | #7 30.13 Downloading passlib-1.7.4-py2.py3-none-any.whl (525 kB) 2025-04-12 03:06:48.716611 | ubuntu-noble | #7 30.15 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 525.6/525.6 kB 24.3 MB/s eta 0:00:00 2025-04-12 03:06:48.716628 | ubuntu-noble | #7 30.17 Downloading pycryptodome-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-04-12 03:06:48.716655 | ubuntu-noble | #7 30.23 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 37.8 MB/s eta 0:00:00 2025-04-12 03:06:48.831286 | ubuntu-noble | #7 30.25 Downloading pykeepass-4.1.1.post1-py3-none-any.whl (55 kB) 2025-04-12 03:06:48.831404 | ubuntu-noble | #7 30.27 Downloading python_gilt-1.2.3-py2.py3-none-any.whl (22 kB) 2025-04-12 03:06:48.831422 | ubuntu-noble | #7 30.29 Downloading ruamel.yaml-0.18.10-py3-none-any.whl (117 kB) 2025-04-12 03:06:48.831454 | ubuntu-noble | #7 30.30 Downloading yamllint-1.37.0-py3-none-any.whl (68 kB) 2025-04-12 03:06:48.940096 | ubuntu-noble | #7 30.32 Downloading ansible_core-2.18.4-py3-none-any.whl (2.2 MB) 2025-04-12 03:06:48.940537 | ubuntu-noble | #7 30.38 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.2/2.2 MB 38.5 MB/s eta 0:00:00 2025-04-12 03:06:48.940617 | ubuntu-noble | #7 30.40 Downloading argon2_cffi-23.1.0-py3-none-any.whl (15 kB) 2025-04-12 03:06:48.940653 | ubuntu-noble | #7 30.42 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl (363 kB) 2025-04-12 03:06:49.054010 | ubuntu-noble | #7 30.44 Downloading binaryornot-0.4.4-py2.py3-none-any.whl (9.0 kB) 2025-04-12 03:06:49.054146 | ubuntu-noble | #7 30.46 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl (488 kB) 2025-04-12 03:06:49.054176 | ubuntu-noble | #7 30.49 Downloading construct-2.10.70-py3-none-any.whl (63 kB) 2025-04-12 03:06:49.054203 | ubuntu-noble | #7 30.51 Downloading debtcollector-3.0.0-py3-none-any.whl (23 kB) 2025-04-12 03:06:49.054246 | ubuntu-noble | #7 30.53 Downloading iso8601-2.1.0-py3-none-any.whl (7.5 kB) 2025-04-12 03:06:49.206016 | ubuntu-noble | #7 30.54 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) 2025-04-12 03:06:49.206128 | ubuntu-noble | #7 30.56 Downloading netaddr-1.3.0-py3-none-any.whl (2.3 MB) 2025-04-12 03:06:49.206146 | ubuntu-noble | #7 30.62 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 39.7 MB/s eta 0:00:00 2025-04-12 03:06:49.206180 | ubuntu-noble | #7 30.64 Downloading oslo.i18n-6.5.1-py3-none-any.whl (46 kB) 2025-04-12 03:06:49.311904 | ubuntu-noble | #7 30.66 Downloading packaging-24.2-py3-none-any.whl (65 kB) 2025-04-12 03:06:49.312058 | ubuntu-noble | #7 30.67 Downloading pathspec-0.12.1-py3-none-any.whl (31 kB) 2025-04-12 03:06:49.312076 | ubuntu-noble | #7 30.69 Downloading pbr-6.1.1-py2.py3-none-any.whl (108 kB) 2025-04-12 03:06:49.312091 | ubuntu-noble | #7 30.71 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-04-12 03:06:49.312124 | ubuntu-noble | #7 30.77 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 38.7 MB/s eta 0:00:00 2025-04-12 03:06:49.414024 | ubuntu-noble | #7 30.79 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl (1.1 MB) 2025-04-12 03:06:49.414133 | ubuntu-noble | #7 30.83 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 36.1 MB/s eta 0:00:00 2025-04-12 03:06:49.414154 | ubuntu-noble | #7 30.84 Downloading pyotp-2.9.0-py3-none-any.whl (13 kB) 2025-04-12 03:06:49.414169 | ubuntu-noble | #7 30.86 Downloading pyparsing-3.2.3-py3-none-any.whl (111 kB) 2025-04-12 03:06:49.414184 | ubuntu-noble | #7 30.88 Downloading python_slugify-8.0.4-py2.py3-none-any.whl (10 kB) 2025-04-12 03:06:49.414211 | ubuntu-noble | #7 30.90 Downloading requests-2.32.3-py3-none-any.whl (64 kB) 2025-04-12 03:06:49.414575 | ubuntu-noble | #7 30.92 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl (745 kB) 2025-04-12 03:06:49.601358 | ubuntu-noble | #7 30.94 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 745.8/745.8 kB 35.5 MB/s eta 0:00:00 2025-04-12 03:06:49.601472 | ubuntu-noble | #7 30.96 Downloading tzdata-2025.2-py2.py3-none-any.whl (347 kB) 2025-04-12 03:06:49.601491 | ubuntu-noble | #7 30.98 Downloading arrow-1.3.0-py3-none-any.whl (66 kB) 2025-04-12 03:06:49.601518 | ubuntu-noble | #7 31.00 Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB) 2025-04-12 03:06:49.711101 | ubuntu-noble | #7 31.02 Downloading fasteners-0.19-py3-none-any.whl (18 kB) 2025-04-12 03:06:49.711193 | ubuntu-noble | #7 31.04 Downloading lxml-5.3.2-cp312-cp312-musllinux_1_2_x86_64.whl (5.1 MB) 2025-04-12 03:06:49.711220 | ubuntu-noble | #7 31.17 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.1/5.1 MB 39.8 MB/s eta 0:00:00 2025-04-12 03:06:49.827788 | ubuntu-noble | #7 31.19 Downloading rich-14.0.0-py3-none-any.whl (243 kB) 2025-04-12 03:06:49.828321 | ubuntu-noble | #7 31.21 Downloading sh-2.2.2-py3-none-any.whl (38 kB) 2025-04-12 03:06:49.828384 | ubuntu-noble | #7 31.22 Downloading certifi-2025.1.31-py3-none-any.whl (166 kB) 2025-04-12 03:06:49.828401 | ubuntu-noble | #7 31.24 Downloading chardet-5.2.0-py3-none-any.whl (199 kB) 2025-04-12 03:06:49.828415 | ubuntu-noble | #7 31.26 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl (146 kB) 2025-04-12 03:06:49.828430 | ubuntu-noble | #7 31.28 Downloading idna-3.10-py3-none-any.whl (70 kB) 2025-04-12 03:06:49.828473 | ubuntu-noble | #7 31.30 Downloading markdown_it_py-3.0.0-py3-none-any.whl (87 kB) 2025-04-12 03:06:49.933472 | ubuntu-noble | #7 31.32 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl (23 kB) 2025-04-12 03:06:49.933594 | ubuntu-noble | #7 31.33 Downloading pygments-2.19.1-py3-none-any.whl (1.2 MB) 2025-04-12 03:06:49.933615 | ubuntu-noble | #7 31.36 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 37.6 MB/s eta 0:00:00 2025-04-12 03:06:49.933632 | ubuntu-noble | #7 31.38 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl (229 kB) 2025-04-12 03:06:49.933647 | ubuntu-noble | #7 31.40 Downloading resolvelib-1.0.1-py2.py3-none-any.whl (17 kB) 2025-04-12 03:06:49.933676 | ubuntu-noble | #7 31.41 Downloading text_unidecode-1.3-py2.py3-none-any.whl (78 kB) 2025-04-12 03:06:50.168797 | ubuntu-noble | #7 31.43 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl (14 kB) 2025-04-12 03:06:50.168905 | ubuntu-noble | #7 31.45 Downloading urllib3-2.4.0-py3-none-any.whl (128 kB) 2025-04-12 03:06:50.168919 | ubuntu-noble | #7 31.47 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl (87 kB) 2025-04-12 03:06:50.168927 | ubuntu-noble | #7 31.48 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl (88 kB) 2025-04-12 03:06:50.168934 | ubuntu-noble | #7 31.50 Downloading pycparser-2.22-py3-none-any.whl (117 kB) 2025-04-12 03:06:50.168951 | ubuntu-noble | #7 31.52 Downloading setuptools-78.1.0-py3-none-any.whl (1.3 MB) 2025-04-12 03:06:50.552333 | ubuntu-noble | #7 31.55 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 36.7 MB/s eta 0:00:00 2025-04-12 03:06:50.552481 | ubuntu-noble | #7 31.57 Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) 2025-04-12 03:06:50.552502 | ubuntu-noble | #7 31.59 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB) 2025-04-12 03:06:50.552531 | ubuntu-noble | #7 32.12 Building wheels for collected packages: pwgen, psutil 2025-04-12 03:06:50.703540 | ubuntu-noble | #7 32.12 Building wheel for pwgen (pyproject.toml): started 2025-04-12 03:06:50.993362 | ubuntu-noble | #7 32.56 Building wheel for pwgen (pyproject.toml): finished with status 'done' 2025-04-12 03:06:51.148420 | ubuntu-noble | #7 32.56 Created wheel for pwgen: filename=pwgen-0.8.2.post0-py3-none-any.whl size=3798 sha256=6a222ac8e2f37b234998cf01800d45814eaffd72f93e1e8402f1d3c1d91de970 2025-04-12 03:06:53.890442 | ubuntu-noble | #7 32.56 Stored in directory: /tmp/pip-ephem-wheel-cache-dfo8m3be/wheels/8e/56/bf/a88cd4e5b84752858d6db0c914d636211570e8a1e73b53b5dd 2025-04-12 03:06:53.891130 | ubuntu-noble | #7 32.57 Building wheel for psutil (pyproject.toml): started 2025-04-12 03:06:53.891149 | ubuntu-noble | #7 35.46 Building wheel for psutil (pyproject.toml): finished with status 'done' 2025-04-12 03:06:54.056125 | ubuntu-noble | #7 35.46 Created wheel for psutil: filename=psutil-7.0.0-cp36-abi3-linux_x86_64.whl size=277227 sha256=a0e54dcfe2c5b9e22a18f5f4f0128c5ab35edab14e06fa9517e20eb617e584dc 2025-04-12 03:06:54.341950 | ubuntu-noble | #7 35.46 Stored in directory: /tmp/pip-ephem-wheel-cache-dfo8m3be/wheels/0c/58/48/ccefe23b905f1dd76f8444f328ff2cfb1d4920a081f9d5d03d 2025-04-12 03:06:54.342147 | ubuntu-noble | #7 35.47 Successfully built pwgen psutil 2025-04-12 03:06:54.342231 | ubuntu-noble | #7 35.91 Installing collected packages: text-unidecode, resolvelib, pwgen, passlib, wrapt, urllib3, tzdata, types-python-dateutil, six, sh, setuptools, ruamel.yaml.clib, PyYAML, python-slugify, pyparsing, pyotp, pygments, pycryptodomex, pycryptodome, pycparser, psutil, pathspec, packaging, netaddr, mdurl, MarkupSafe, lxml, loguru, iso8601, idna, fasteners, construct, colorama, click, charset-normalizer, chardet, certifi, bcrypt, yamllint, ruamel.yaml, requests, python-gilt, python-dateutil, pbr, markdown-it-py, Jinja2, debtcollector, cffi, binaryornot, rich, pynacl, oslo.i18n, cryptography, arrow, argon2-cffi-bindings, paramiko, oslo.utils, cookiecutter, argon2_cffi, ansible-core, pykeepass, ansible 2025-04-12 03:07:47.786996 | ubuntu-noble | #7 89.35 Successfully installed Jinja2-3.1.6 MarkupSafe-3.0.2 PyYAML-6.0.2 ansible-11.4.0 ansible-core-2.18.4 argon2-cffi-bindings-21.2.0 argon2_cffi-23.1.0 arrow-1.3.0 bcrypt-4.3.0 binaryornot-0.4.4 certifi-2025.1.31 cffi-1.17.1 chardet-5.2.0 charset-normalizer-3.4.1 click-8.1.8 colorama-0.4.6 construct-2.10.70 cookiecutter-2.6.0 cryptography-44.0.2 debtcollector-3.0.0 fasteners-0.19 idna-3.10 iso8601-2.1.0 loguru-0.7.3 lxml-5.3.2 markdown-it-py-3.0.0 mdurl-0.1.2 netaddr-1.3.0 oslo.i18n-6.5.1 oslo.utils-8.2.0 packaging-24.2 paramiko-3.5.1 passlib-1.7.4 pathspec-0.12.1 pbr-6.1.1 psutil-7.0.0 pwgen-0.8.2.post0 pycparser-2.22 pycryptodome-3.22.0 pycryptodomex-3.22.0 pygments-2.19.1 pykeepass-4.1.1.post1 pynacl-1.5.0 pyotp-2.9.0 pyparsing-3.2.3 python-dateutil-2.9.0.post0 python-gilt-1.2.3 python-slugify-8.0.4 requests-2.32.3 resolvelib-1.0.1 rich-14.0.0 ruamel.yaml-0.18.10 ruamel.yaml.clib-0.2.12 setuptools-78.1.0 sh-2.2.2 six-1.17.0 text-unidecode-1.3 types-python-dateutil-2.9.0.20241206 tzdata-2025.2 urllib3-2.4.0 wrapt-1.17.2 yamllint-1.37.0 2025-04-12 03:07:47.936965 | ubuntu-noble | #7 89.36 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning. 2025-04-12 03:07:48.193571 | ubuntu-noble | #7 89.76 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/main: No such file or directory 2025-04-12 03:07:48.297119 | ubuntu-noble | #7 89.76 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/community: No such file or directory 2025-04-12 03:07:48.297222 | ubuntu-noble | #7 89.76 (1/36) Purging .build-deps (20250412.030620) 2025-04-12 03:07:48.404452 | ubuntu-noble | #7 89.76 (2/36) Purging build-base (0.5-r3) 2025-04-12 03:07:48.404532 | ubuntu-noble | #7 89.76 (3/36) Purging file (5.46-r2) 2025-04-12 03:07:48.404550 | ubuntu-noble | #7 89.76 (4/36) Purging g++ (14.2.0-r4) 2025-04-12 03:07:48.404566 | ubuntu-noble | #7 89.77 (5/36) Purging libstdc++-dev (14.2.0-r4) 2025-04-12 03:07:48.404581 | ubuntu-noble | #7 89.79 (6/36) Purging make (4.4.1-r2) 2025-04-12 03:07:48.404597 | ubuntu-noble | #7 89.79 (7/36) Purging fortify-headers (1.1-r5) 2025-04-12 03:07:48.404612 | ubuntu-noble | #7 89.79 (8/36) Purging patch (2.7.6-r10) 2025-04-12 03:07:48.404627 | ubuntu-noble | #7 89.79 (9/36) Purging cargo (1.83.0-r0) 2025-04-12 03:07:48.404663 | ubuntu-noble | #7 89.79 (10/36) Purging libffi-dev (3.4.7-r0) 2025-04-12 03:07:48.404680 | ubuntu-noble | #7 89.79 (11/36) Purging linux-headers (6.6-r1) 2025-04-12 03:07:48.404696 | ubuntu-noble | #7 89.81 (12/36) Purging openssl-dev (3.3.3-r0) 2025-04-12 03:07:48.404711 | ubuntu-noble | #7 89.82 (13/36) Purging python3-dev (3.12.10-r0) 2025-04-12 03:07:48.404726 | ubuntu-noble | #7 89.83 (14/36) Purging python3-pyc (3.12.10-r0) 2025-04-12 03:07:48.404741 | ubuntu-noble | #7 89.83 (15/36) Purging python3-pycache-pyc0 (3.12.10-r0) 2025-04-12 03:07:48.404757 | ubuntu-noble | #7 89.85 (16/36) Purging pyc (3.12.10-r0) 2025-04-12 03:07:48.404772 | ubuntu-noble | #7 89.85 (17/36) Purging python3 (3.12.10-r0) 2025-04-12 03:07:48.404787 | ubuntu-noble | #7 89.87 (18/36) Purging rust (1.83.0-r0) 2025-04-12 03:07:48.404814 | ubuntu-noble | #7 89.90 (19/36) Purging gcc (14.2.0-r4) 2025-04-12 03:07:48.562475 | ubuntu-noble | #7 89.94 (20/36) Purging binutils (2.43.1-r2) 2025-04-12 03:07:48.562519 | ubuntu-noble | #7 89.94 (21/36) Purging libatomic (14.2.0-r4) 2025-04-12 03:07:48.562526 | ubuntu-noble | #7 89.94 (22/36) Purging libgomp (14.2.0-r4) 2025-04-12 03:07:48.562532 | ubuntu-noble | #7 89.94 (23/36) Purging musl-dev (1.2.5-r9) 2025-04-12 03:07:48.562537 | ubuntu-noble | #7 89.95 (24/36) Purging isl26 (0.26-r1) 2025-04-12 03:07:48.562543 | ubuntu-noble | #7 89.95 (25/36) Purging jansson (2.14-r4) 2025-04-12 03:07:48.562548 | ubuntu-noble | #7 89.95 (26/36) Purging libmagic (5.46-r2) 2025-04-12 03:07:48.562554 | ubuntu-noble | #7 89.95 (27/36) Purging llvm19-libs (19.1.4-r1) 2025-04-12 03:07:48.562569 | ubuntu-noble | #7 89.97 (28/36) Purging mpc1 (1.3.1-r1) 2025-04-12 03:07:48.562581 | ubuntu-noble | #7 89.97 (29/36) Purging mpdecimal (4.0.0-r0) 2025-04-12 03:07:48.748302 | ubuntu-noble | #7 89.97 (30/36) Purging mpfr4 (4.2.1-r0) 2025-04-12 03:07:48.751604 | ubuntu-noble | #7 89.97 (31/36) Purging pkgconf (2.3.0-r0) 2025-04-12 03:07:48.751653 | ubuntu-noble | #7 89.97 (32/36) Purging scudo-malloc (19.1.4-r0) 2025-04-12 03:07:48.751667 | ubuntu-noble | #7 89.97 (33/36) Purging gmp (6.3.0-r2) 2025-04-12 03:07:48.751679 | ubuntu-noble | #7 89.97 (34/36) Purging libstdc++ (14.2.0-r4) 2025-04-12 03:07:48.751690 | ubuntu-noble | #7 89.98 (35/36) Purging libgcc (14.2.0-r4) 2025-04-12 03:07:48.751701 | ubuntu-noble | #7 89.98 (36/36) Purging libxml2 (2.13.4-r5) 2025-04-12 03:07:48.751712 | ubuntu-noble | #7 89.98 Executing busybox-1.37.0-r12.trigger 2025-04-12 03:07:48.751724 | ubuntu-noble | #7 89.98 OK: 26 MiB in 52 packages 2025-04-12 03:07:48.751746 | ubuntu-noble | #7 DONE 90.3s 2025-04-12 03:07:48.902032 | ubuntu-noble | 2025-04-12 03:07:48.934051 | ubuntu-noble | #8 [4/5] COPY . /data 2025-04-12 03:07:48.934127 | ubuntu-noble | #8 DONE 0.2s 2025-04-12 03:07:49.159949 | ubuntu-noble | 2025-04-12 03:07:56.273188 | ubuntu-noble | #9 [5/5] WORKDIR /data 2025-04-12 03:07:56.273280 | ubuntu-noble | #9 DONE 0.1s 2025-04-12 03:07:56.273289 | ubuntu-noble | 2025-04-12 03:07:56.273296 | ubuntu-noble | #10 exporting to image 2025-04-12 03:07:56.273303 | ubuntu-noble | #10 exporting layers 2025-04-12 03:07:56.273319 | ubuntu-noble | #10 exporting layers 7.3s done 2025-04-12 03:07:56.373772 | ubuntu-noble | #10 writing image sha256:757d7621fb47beca56ab5d50f441428c6cc010e4c592ce0f3951d9d8229d1559 done 2025-04-12 03:07:56.384397 | ubuntu-noble | #10 naming to docker.io/library/724942f done 2025-04-12 03:07:56.384475 | ubuntu-noble | #10 DONE 7.3s 2025-04-12 03:07:56.762187 | ubuntu-noble | changed 2025-04-12 03:07:56.772586 | 2025-04-12 03:07:56.772682 | TASK [Run push script] 2025-04-12 03:07:57.112854 | ubuntu-noble | ++ git rev-parse --short HEAD 2025-04-12 03:07:57.123054 | ubuntu-noble | + revision=724942f 2025-04-12 03:07:57.123104 | ubuntu-noble | + [[ -n osism.harbor.regio.digital ]] 2025-04-12 03:07:57.166579 | ubuntu-noble | + repository=osism.harbor.regio.digital/osism/cookiecutter 2025-04-12 03:07:57.166638 | ubuntu-noble | + docker tag 724942f osism.harbor.regio.digital/osism/cookiecutter:latest 2025-04-12 03:07:57.166656 | ubuntu-noble | + docker push osism.harbor.regio.digital/osism/cookiecutter:latest 2025-04-12 03:07:57.197623 | ubuntu-noble | The push refers to repository [osism.harbor.regio.digital/osism/cookiecutter] 2025-04-12 03:07:57.232239 | ubuntu-noble | 5f70bf18a086: Preparing 2025-04-12 03:07:57.233356 | ubuntu-noble | c26f45fd85b4: Preparing 2025-04-12 03:07:57.233420 | ubuntu-noble | db317fc8bbe8: Preparing 2025-04-12 03:07:58.565979 | ubuntu-noble | 1229abd292fe: Preparing 2025-04-12 03:07:58.566065 | ubuntu-noble | c5f83227c988: Preparing 2025-04-12 03:07:58.566074 | ubuntu-noble | 5a73889e102c: Preparing 2025-04-12 03:07:58.566080 | ubuntu-noble | 2748e349efd5: Preparing 2025-04-12 03:07:58.566085 | ubuntu-noble | 08000c18d16d: Preparing 2025-04-12 03:07:58.566091 | ubuntu-noble | 5a73889e102c: Waiting 2025-04-12 03:07:58.566098 | ubuntu-noble | 2748e349efd5: Waiting 2025-04-12 03:07:58.566103 | ubuntu-noble | 08000c18d16d: Waiting 2025-04-12 03:07:58.566130 | ubuntu-noble | c5f83227c988: Layer already exists 2025-04-12 03:07:59.157994 | ubuntu-noble | 5a73889e102c: Layer already exists 2025-04-12 03:07:59.777752 | ubuntu-noble | 2748e349efd5: Layer already exists 2025-04-12 03:08:00.273906 | ubuntu-noble | 08000c18d16d: Layer already exists 2025-04-12 03:08:02.809145 | ubuntu-noble | 5f70bf18a086: Pushed 2025-04-12 03:08:03.384091 | ubuntu-noble | c26f45fd85b4: Pushed 2025-04-12 03:08:03.499112 | ubuntu-noble | 1229abd292fe: Pushed 2025-04-12 03:08:37.419766 | ubuntu-noble | db317fc8bbe8: Pushed 2025-04-12 03:08:43.550635 | ubuntu-noble | latest: digest: sha256:44952172508b70924f57fa0ea6cf97d4c8ea8ca3addf57a5966343e3f0e39008 size: 1993 2025-04-12 03:08:43.858419 | ubuntu-noble | changed 2025-04-12 03:08:43.893687 | 2025-04-12 03:08:43.893779 | PLAY RECAP 2025-04-12 03:08:43.893837 | ubuntu-noble | ok: 3 changed: 3 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-04-12 03:08:43.893864 | 2025-04-12 03:08:44.003737 | RUN END RESULT_NORMAL: [untrusted : github.com/osism/cfg-cookiecutter/playbooks/build.yml@main] 2025-04-12 03:08:44.012128 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-04-12 03:08:44.981916 | 2025-04-12 03:08:44.982080 | PLAY [Base post] 2025-04-12 03:08:45.036904 | 2025-04-12 03:08:45.037092 | TASK [remove-build-sshkey : Remove the build SSH key from all nodes] 2025-04-12 03:08:45.952495 | ubuntu-noble | changed 2025-04-12 03:08:45.987330 | 2025-04-12 03:08:45.987472 | PLAY RECAP 2025-04-12 03:08:45.987536 | ubuntu-noble | ok: 1 changed: 1 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-04-12 03:08:45.987599 | 2025-04-12 03:08:46.135513 | POST-RUN END RESULT_NORMAL: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-04-12 03:08:46.139160 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post-logs.yaml@main] 2025-04-12 03:08:46.956704 | 2025-04-12 03:08:46.956836 | PLAY [Base post-logs] 2025-04-12 03:08:46.972141 | 2025-04-12 03:08:46.972270 | TASK [generate-zuul-manifest : Generate Zuul manifest] 2025-04-12 03:08:47.899038 | localhost | changed 2025-04-12 03:08:47.902744 | 2025-04-12 03:08:47.902848 | TASK [generate-zuul-manifest : Return Zuul manifest URL to Zuul] 2025-04-12 03:08:47.980160 | localhost | ok 2025-04-12 03:08:47.986109 | 2025-04-12 03:08:47.986203 | TASK [Set zuul-log-path fact] 2025-04-12 03:08:48.058037 | localhost | ok 2025-04-12 03:08:48.067700 | 2025-04-12 03:08:48.067813 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-04-12 03:08:48.124024 | localhost | ok 2025-04-12 03:08:48.129545 | 2025-04-12 03:08:48.129638 | TASK [upload-logs : Create log directories] 2025-04-12 03:08:48.830880 | localhost | changed 2025-04-12 03:08:48.834800 | 2025-04-12 03:08:48.834889 | TASK [upload-logs : Ensure logs are readable before uploading] 2025-04-12 03:08:49.493655 | localhost -> localhost | ok: Runtime: 0:00:00.011564 2025-04-12 03:08:49.498627 | 2025-04-12 03:08:49.498729 | TASK [upload-logs : Upload logs to log server] 2025-04-12 03:08:50.450369 | localhost | Output suppressed because no_log was given 2025-04-12 03:08:50.453590 | 2025-04-12 03:08:50.453684 | LOOP [upload-logs : Compress console log and json output] 2025-04-12 03:08:50.593815 | localhost | skipping: Conditional result was False 2025-04-12 03:08:50.609705 | localhost | skipping: Conditional result was False 2025-04-12 03:08:50.614201 | 2025-04-12 03:08:50.614327 | LOOP [upload-logs : Upload compressed console log and json output] 2025-04-12 03:08:50.729573 | localhost | skipping: Conditional result was False 2025-04-12 03:08:50.729834 | 2025-04-12 03:08:50.735667 | localhost | skipping: Conditional result was False 2025-04-12 03:08:50.746626 | 2025-04-12 03:08:50.746725 | LOOP [upload-logs : Upload console log and json output]