2025-04-16 03:04:54.931805 | Job console starting... 2025-04-16 03:04:54.939382 | Updating repositories 2025-04-16 03:04:55.023725 | Preparing job workspace 2025-04-16 03:04:56.705453 | Running Ansible setup... 2025-04-16 03:05:02.906691 | PRE-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/pre.yaml@main] 2025-04-16 03:05:04.066881 | 2025-04-16 03:05:04.066996 | PLAY [Base pre] 2025-04-16 03:05:04.115463 | 2025-04-16 03:05:04.115578 | TASK [Setup log path fact] 2025-04-16 03:05:04.167416 | ubuntu-noble | ok 2025-04-16 03:05:04.197052 | 2025-04-16 03:05:04.197192 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-04-16 03:05:04.262464 | ubuntu-noble | ok 2025-04-16 03:05:04.282368 | 2025-04-16 03:05:04.282464 | TASK [emit-job-header : Print job information] 2025-04-16 03:05:04.353605 | # Job Information 2025-04-16 03:05:04.353749 | Ansible Version: 2.15.3 2025-04-16 03:05:04.353777 | Job: container-image-cfg-cookiecutter-push 2025-04-16 03:05:04.353801 | Pipeline: periodic-daily 2025-04-16 03:05:04.353818 | Executor: 7d211f194f6a 2025-04-16 03:05:04.353833 | Triggered by: https://github.com/osism/cfg-cookiecutter 2025-04-16 03:05:04.353849 | Event ID: 949f2508e1794aa594665ed73724d3b6 2025-04-16 03:05:04.361008 | 2025-04-16 03:05:04.361100 | LOOP [emit-job-header : Print node information] 2025-04-16 03:05:04.537563 | ubuntu-noble | ok: 2025-04-16 03:05:04.537791 | ubuntu-noble | # Node Information 2025-04-16 03:05:04.537828 | ubuntu-noble | Inventory Hostname: ubuntu-noble 2025-04-16 03:05:04.537852 | ubuntu-noble | Hostname: ubuntu 2025-04-16 03:05:04.537873 | ubuntu-noble | Username: zuul 2025-04-16 03:05:04.537893 | ubuntu-noble | Distro: Ubuntu 24.04 2025-04-16 03:05:04.537916 | ubuntu-noble | Provider: regiocloud-a 2025-04-16 03:05:04.537936 | ubuntu-noble | Label: ubuntu-noble 2025-04-16 03:05:04.537956 | ubuntu-noble | Product Name: OpenStack Nova 2025-04-16 03:05:04.537976 | ubuntu-noble | Interface IP: 81.163.193.117 2025-04-16 03:05:04.554390 | 2025-04-16 03:05:04.554488 | TASK [log-inventory : Ensure Zuul Ansible directory exists] 2025-04-16 03:05:05.205194 | ubuntu-noble -> localhost | changed 2025-04-16 03:05:05.212965 | 2025-04-16 03:05:05.213054 | TASK [log-inventory : Copy ansible inventory to logs dir] 2025-04-16 03:05:07.017338 | ubuntu-noble -> localhost | changed 2025-04-16 03:05:07.034729 | 2025-04-16 03:05:07.034845 | TASK [add-build-sshkey : Check to see if ssh key was already created for this build] 2025-04-16 03:05:07.337001 | ubuntu-noble -> localhost | ok 2025-04-16 03:05:07.343851 | 2025-04-16 03:05:07.343940 | TASK [add-build-sshkey : Create a new key in workspace based on build UUID] 2025-04-16 03:05:07.398544 | ubuntu-noble | ok 2025-04-16 03:05:07.422493 | ubuntu-noble | included: /var/lib/zuul/builds/97cba64c8daa4a538aeea72702d0f4dc/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/create-key-and-replace.yaml 2025-04-16 03:05:07.431019 | 2025-04-16 03:05:07.431117 | TASK [add-build-sshkey : Create Temp SSH key] 2025-04-16 03:05:08.104712 | ubuntu-noble -> localhost | Generating public/private rsa key pair. 2025-04-16 03:05:08.104893 | ubuntu-noble -> localhost | Your identification has been saved in /var/lib/zuul/builds/97cba64c8daa4a538aeea72702d0f4dc/work/97cba64c8daa4a538aeea72702d0f4dc_id_rsa 2025-04-16 03:05:08.104928 | ubuntu-noble -> localhost | Your public key has been saved in /var/lib/zuul/builds/97cba64c8daa4a538aeea72702d0f4dc/work/97cba64c8daa4a538aeea72702d0f4dc_id_rsa.pub 2025-04-16 03:05:08.104953 | ubuntu-noble -> localhost | The key fingerprint is: 2025-04-16 03:05:08.104977 | ubuntu-noble -> localhost | SHA256:EC+lanNk7xBL86xiUpoNoMCfdRQrYC1kP4ZEfQ+ISog zuul-build-sshkey 2025-04-16 03:05:08.104999 | ubuntu-noble -> localhost | The key's randomart image is: 2025-04-16 03:05:08.105019 | ubuntu-noble -> localhost | +---[RSA 3072]----+ 2025-04-16 03:05:08.105039 | ubuntu-noble -> localhost | |o oB+ ooo | 2025-04-16 03:05:08.105060 | ubuntu-noble -> localhost | |E.+o++.B. | 2025-04-16 03:05:08.105079 | ubuntu-noble -> localhost | |+....*@o+ | 2025-04-16 03:05:08.105107 | ubuntu-noble -> localhost | |oo. +=+X . | 2025-04-16 03:05:08.105140 | ubuntu-noble -> localhost | |. .o= + S | 2025-04-16 03:05:08.105161 | ubuntu-noble -> localhost | | B o + | 2025-04-16 03:05:08.105185 | ubuntu-noble -> localhost | | + + . . | 2025-04-16 03:05:08.105205 | ubuntu-noble -> localhost | | o . | 2025-04-16 03:05:08.105225 | ubuntu-noble -> localhost | | | 2025-04-16 03:05:08.105244 | ubuntu-noble -> localhost | +----[SHA256]-----+ 2025-04-16 03:05:08.105291 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.228275 2025-04-16 03:05:08.112609 | 2025-04-16 03:05:08.112698 | TASK [add-build-sshkey : Remote setup ssh keys (linux)] 2025-04-16 03:05:08.142313 | ubuntu-noble | ok 2025-04-16 03:05:08.153272 | ubuntu-noble | included: /var/lib/zuul/builds/97cba64c8daa4a538aeea72702d0f4dc/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/remote-linux.yaml 2025-04-16 03:05:08.162426 | 2025-04-16 03:05:08.162505 | TASK [add-build-sshkey : Remove previously added zuul-build-sshkey] 2025-04-16 03:05:08.186184 | ubuntu-noble | skipping: Conditional result was False 2025-04-16 03:05:08.192909 | 2025-04-16 03:05:08.192991 | TASK [add-build-sshkey : Enable access via build key on all nodes] 2025-04-16 03:05:08.834664 | ubuntu-noble | changed 2025-04-16 03:05:08.843575 | 2025-04-16 03:05:08.843676 | TASK [add-build-sshkey : Make sure user has a .ssh] 2025-04-16 03:05:09.111427 | ubuntu-noble | ok 2025-04-16 03:05:09.118348 | 2025-04-16 03:05:09.118442 | TASK [add-build-sshkey : Install build private key as SSH key on all nodes] 2025-04-16 03:05:09.758168 | ubuntu-noble | changed 2025-04-16 03:05:09.767563 | 2025-04-16 03:05:09.767665 | TASK [add-build-sshkey : Install build public key as SSH key on all nodes] 2025-04-16 03:05:10.445362 | ubuntu-noble | changed 2025-04-16 03:05:10.459260 | 2025-04-16 03:05:10.459446 | TASK [add-build-sshkey : Remote setup ssh keys (windows)] 2025-04-16 03:05:10.486364 | ubuntu-noble | skipping: Conditional result was False 2025-04-16 03:05:10.496015 | 2025-04-16 03:05:10.496346 | TASK [remove-zuul-sshkey : Remove master key from local agent] 2025-04-16 03:05:10.891209 | ubuntu-noble -> localhost | changed 2025-04-16 03:05:10.906808 | 2025-04-16 03:05:10.906921 | TASK [add-build-sshkey : Add back temp key] 2025-04-16 03:05:11.238760 | ubuntu-noble -> localhost | Identity added: /var/lib/zuul/builds/97cba64c8daa4a538aeea72702d0f4dc/work/97cba64c8daa4a538aeea72702d0f4dc_id_rsa (zuul-build-sshkey) 2025-04-16 03:05:11.239098 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.008995 2025-04-16 03:05:11.251825 | 2025-04-16 03:05:11.251928 | TASK [add-build-sshkey : Verify we can still SSH to all nodes] 2025-04-16 03:05:11.633689 | ubuntu-noble | ok 2025-04-16 03:05:11.640571 | 2025-04-16 03:05:11.640667 | TASK [add-build-sshkey : Verify we can still SSH to all nodes (windows)] 2025-04-16 03:05:11.677919 | ubuntu-noble | skipping: Conditional result was False 2025-04-16 03:05:11.703637 | 2025-04-16 03:05:11.703763 | TASK [start-zuul-console : Start zuul_console daemon.] 2025-04-16 03:05:12.135723 | ubuntu-noble | ok 2025-04-16 03:05:12.147824 | 2025-04-16 03:05:12.147923 | TASK [validate-host : Define zuul_info_dir fact] 2025-04-16 03:05:12.194421 | ubuntu-noble | ok 2025-04-16 03:05:12.207502 | 2025-04-16 03:05:12.207611 | TASK [validate-host : Ensure Zuul Ansible directory exists] 2025-04-16 03:05:12.486738 | ubuntu-noble -> localhost | ok 2025-04-16 03:05:12.495302 | 2025-04-16 03:05:12.495406 | TASK [validate-host : Collect information about the host] 2025-04-16 03:05:13.576093 | ubuntu-noble | ok 2025-04-16 03:05:13.588832 | 2025-04-16 03:05:13.588928 | TASK [validate-host : Sanitize hostname] 2025-04-16 03:05:13.648800 | ubuntu-noble | ok 2025-04-16 03:05:13.654767 | 2025-04-16 03:05:13.654864 | TASK [validate-host : Write out all ansible variables/facts known for each host] 2025-04-16 03:05:14.620999 | ubuntu-noble -> localhost | changed 2025-04-16 03:05:14.627591 | 2025-04-16 03:05:14.627681 | TASK [validate-host : Collect information about zuul worker] 2025-04-16 03:05:15.124191 | ubuntu-noble | ok 2025-04-16 03:05:15.132527 | 2025-04-16 03:05:15.132624 | TASK [validate-host : Write out all zuul information for each host] 2025-04-16 03:05:16.075569 | ubuntu-noble -> localhost | changed 2025-04-16 03:05:16.089787 | 2025-04-16 03:05:16.089895 | TASK [prepare-workspace-log : Start zuul_console daemon.] 2025-04-16 03:05:16.391223 | ubuntu-noble | ok 2025-04-16 03:05:16.398532 | 2025-04-16 03:05:16.398637 | TASK [prepare-workspace-log : Synchronize src repos to workspace directory.] 2025-04-16 03:05:17.222431 | ubuntu-noble | changed: 2025-04-16 03:05:17.222666 | ubuntu-noble | cd+++++++++ src/ 2025-04-16 03:05:17.222701 | ubuntu-noble | cd+++++++++ src/github.com/ 2025-04-16 03:05:17.222722 | ubuntu-noble | cd+++++++++ src/github.com/osism/ 2025-04-16 03:05:17.222741 | ubuntu-noble | cd+++++++++ src/github.com/osism/cfg-cookiecutter/ 2025-04-16 03:05:17.222758 | ubuntu-noble | Containerfile 2025-04-16 03:05:17.222868 | ubuntu-noble | -r /tmp/requirements.txt (line 2)) 2025-04-16 03:06:34.948335 | ubuntu-noble | #7 22.73 Downloading ansible_core-2.18.4-py3-none-any.whl.metadata (7.7 kB) 2025-04-16 03:06:35.085333 | ubuntu-noble | #7 22.85 Collecting binaryornot>=0.4.4 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:35.085409 | ubuntu-noble | #7 22.86 Downloading binaryornot-0.4.4-py2.py3-none-any.whl.metadata (6.0 kB) 2025-04-16 03:06:35.206766 | ubuntu-noble | #7 22.91 Collecting Jinja2<4.0.0,>=2.7 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:35.206815 | ubuntu-noble | #7 22.93 Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB) 2025-04-16 03:06:35.206824 | ubuntu-noble | #7 22.98 Collecting python-slugify>=4.0.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:35.206839 | ubuntu-noble | #7 23.00 Downloading python_slugify-8.0.4-py2.py3-none-any.whl.metadata (8.5 kB) 2025-04-16 03:06:35.438440 | ubuntu-noble | #7 23.05 Collecting requests>=2.23.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:35.438494 | ubuntu-noble | #7 23.07 Downloading requests-2.32.3-py3-none-any.whl.metadata (4.6 kB) 2025-04-16 03:06:35.438501 | ubuntu-noble | #7 23.10 Collecting arrow (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:35.438515 | ubuntu-noble | #7 23.12 Downloading arrow-1.3.0-py3-none-any.whl.metadata (7.5 kB) 2025-04-16 03:06:35.542399 | ubuntu-noble | #7 23.19 Collecting rich (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:35.542465 | ubuntu-noble | #7 23.20 Downloading rich-14.0.0-py3-none-any.whl.metadata (18 kB) 2025-04-16 03:06:35.542473 | ubuntu-noble | #7 23.34 Collecting cffi>=1.12 (from cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-04-16 03:06:35.542510 | ubuntu-noble | #7 23.35 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (1.5 kB) 2025-04-16 03:06:35.646874 | ubuntu-noble | #7 23.38 Collecting iso8601>=0.1.11 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:35.646915 | ubuntu-noble | #7 23.39 Downloading iso8601-2.1.0-py3-none-any.whl.metadata (3.7 kB) 2025-04-16 03:06:35.646922 | ubuntu-noble | #7 23.44 Collecting oslo.i18n>=3.15.3 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:35.646935 | ubuntu-noble | #7 23.46 Downloading oslo.i18n-6.5.1-py3-none-any.whl.metadata (2.1 kB) 2025-04-16 03:06:35.760056 | ubuntu-noble | #7 23.49 Collecting netaddr>=0.10.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:35.760097 | ubuntu-noble | #7 23.51 Downloading netaddr-1.3.0-py3-none-any.whl.metadata (5.0 kB) 2025-04-16 03:06:35.760103 | ubuntu-noble | #7 23.54 Collecting debtcollector>=1.2.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:35.760116 | ubuntu-noble | #7 23.56 Downloading debtcollector-3.0.0-py3-none-any.whl.metadata (2.3 kB) 2025-04-16 03:06:35.941611 | ubuntu-noble | #7 23.61 Collecting pyparsing>=2.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:35.941694 | ubuntu-noble | #7 23.63 Downloading pyparsing-3.2.3-py3-none-any.whl.metadata (5.0 kB) 2025-04-16 03:06:35.941774 | ubuntu-noble | #7 23.66 Collecting packaging>=20.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:35.941811 | ubuntu-noble | #7 23.67 Downloading packaging-24.2-py3-none-any.whl.metadata (3.2 kB) 2025-04-16 03:06:36.105136 | ubuntu-noble | #7 23.71 Collecting tzdata>=2022.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:36.105176 | ubuntu-noble | #7 23.73 Downloading tzdata-2025.2-py2.py3-none-any.whl.metadata (1.4 kB) 2025-04-16 03:06:36.105193 | ubuntu-noble | #7 23.84 Collecting psutil>=3.2.2 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:36.105205 | ubuntu-noble | #7 23.85 Downloading psutil-7.0.0.tar.gz (497 kB) 2025-04-16 03:06:36.116308 | ubuntu-noble | #7 24.01 Installing build dependencies: started 2025-04-16 03:06:38.538016 | ubuntu-noble | #7 26.43 Installing build dependencies: finished with status 'done' 2025-04-16 03:06:38.989192 | ubuntu-noble | #7 26.43 Getting requirements to build wheel: started 2025-04-16 03:06:38.989288 | ubuntu-noble | #7 26.89 Getting requirements to build wheel: finished with status 'done' 2025-04-16 03:06:39.143309 | ubuntu-noble | #7 26.89 Preparing metadata (pyproject.toml): started 2025-04-16 03:06:39.434458 | ubuntu-noble | #7 27.33 Preparing metadata (pyproject.toml): finished with status 'done' 2025-04-16 03:06:39.583444 | ubuntu-noble | #7 27.39 Collecting pbr>=6.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:39.697418 | ubuntu-noble | #7 27.41 Downloading pbr-6.1.1-py2.py3-none-any.whl.metadata (3.4 kB) 2025-04-16 03:06:39.697461 | ubuntu-noble | #7 27.48 Collecting bcrypt>=3.2 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-04-16 03:06:39.697484 | ubuntu-noble | #7 27.50 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl.metadata (10 kB) 2025-04-16 03:06:39.844390 | ubuntu-noble | #7 27.54 Collecting pynacl>=1.5 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-04-16 03:06:39.844440 | ubuntu-noble | #7 27.56 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (8.6 kB) 2025-04-16 03:06:39.844449 | ubuntu-noble | #7 27.60 Collecting pyotp>=2.9.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-16 03:06:39.844464 | ubuntu-noble | #7 27.61 Downloading pyotp-2.9.0-py3-none-any.whl.metadata (9.8 kB) 2025-04-16 03:06:40.031156 | ubuntu-noble | #7 27.74 Collecting construct>=2.10.53 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-16 03:06:40.031212 | ubuntu-noble | #7 27.76 Downloading construct-2.10.70-py3-none-any.whl.metadata (4.2 kB) 2025-04-16 03:06:40.196485 | ubuntu-noble | #7 27.80 Collecting argon2_cffi>=18.1.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-16 03:06:40.196550 | ubuntu-noble | #7 27.82 Downloading argon2_cffi-23.1.0-py3-none-any.whl.metadata (5.2 kB) 2025-04-16 03:06:40.196557 | ubuntu-noble | #7 27.93 Collecting pycryptodomex>=3.6.2 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-16 03:06:40.196570 | ubuntu-noble | #7 27.94 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB) 2025-04-16 03:06:40.270083 | ubuntu-noble | #7 28.17 Collecting lxml (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-16 03:06:40.379313 | ubuntu-noble | #7 28.18 Downloading lxml-5.3.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (3.6 kB) 2025-04-16 03:06:40.506283 | ubuntu-noble | #7 28.21 Collecting colorama (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-16 03:06:40.506324 | ubuntu-noble | #7 28.23 Downloading colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) 2025-04-16 03:06:40.506330 | ubuntu-noble | #7 28.26 Collecting fasteners (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-16 03:06:40.506335 | ubuntu-noble | #7 28.28 Downloading fasteners-0.19-py3-none-any.whl.metadata (4.9 kB) 2025-04-16 03:06:40.506347 | ubuntu-noble | #7 28.33 Collecting sh (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-16 03:06:40.506352 | ubuntu-noble | #7 28.34 Downloading sh-2.2.2-py3-none-any.whl.metadata (3.7 kB) 2025-04-16 03:06:40.506359 | ubuntu-noble | #7 28.40 Collecting ruamel.yaml.clib>=0.2.7 (from ruamel.yaml==0.18.10->-r /tmp/requirements.txt (line 14)) 2025-04-16 03:06:40.628937 | ubuntu-noble | #7 28.42 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (2.7 kB) 2025-04-16 03:06:40.739909 | ubuntu-noble | #7 28.46 Collecting pathspec>=0.5.3 (from yamllint==1.37.0->-r /tmp/requirements.txt (line 15)) 2025-04-16 03:06:40.739983 | ubuntu-noble | #7 28.47 Downloading pathspec-0.12.1-py3-none-any.whl.metadata (21 kB) 2025-04-16 03:06:40.739996 | ubuntu-noble | #7 28.53 Collecting resolvelib<1.1.0,>=0.5.3 (from ansible-core~=2.18.4->ansible==11.4.0->-r /tmp/requirements.txt (line 2)) 2025-04-16 03:06:40.740015 | ubuntu-noble | #7 28.54 Downloading resolvelib-1.0.1-py2.py3-none-any.whl.metadata (4.0 kB) 2025-04-16 03:06:40.902916 | ubuntu-noble | #7 28.57 Collecting argon2-cffi-bindings (from argon2_cffi>=18.1.0->pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-16 03:06:40.902982 | ubuntu-noble | #7 28.58 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (6.7 kB) 2025-04-16 03:06:40.902989 | ubuntu-noble | #7 28.62 Collecting chardet>=3.0.2 (from binaryornot>=0.4.4->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:40.902995 | ubuntu-noble | #7 28.64 Downloading chardet-5.2.0-py3-none-any.whl.metadata (3.4 kB) 2025-04-16 03:06:40.903007 | ubuntu-noble | #7 28.66 Collecting pycparser (from cffi>=1.12->cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-04-16 03:06:41.002970 | ubuntu-noble | #7 28.68 Downloading pycparser-2.22-py3-none-any.whl.metadata (943 bytes) 2025-04-16 03:06:41.003011 | ubuntu-noble | #7 28.80 Collecting wrapt>=1.7.0 (from debtcollector>=1.2.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:41.003026 | ubuntu-noble | #7 28.81 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (6.4 kB) 2025-04-16 03:06:41.199425 | ubuntu-noble | #7 28.89 Collecting MarkupSafe>=2.0 (from Jinja2<4.0.0,>=2.7->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.199467 | ubuntu-noble | #7 28.90 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (4.0 kB) 2025-04-16 03:06:41.199479 | ubuntu-noble | #7 29.10 Collecting setuptools (from pbr>=6.1.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-16 03:06:41.404255 | ubuntu-noble | #7 29.11 Downloading setuptools-78.1.0-py3-none-any.whl.metadata (6.6 kB) 2025-04-16 03:06:41.505938 | ubuntu-noble | #7 29.16 Collecting text-unidecode>=1.3 (from python-slugify>=4.0.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.506046 | ubuntu-noble | #7 29.18 Downloading text_unidecode-1.3-py2.py3-none-any.whl.metadata (2.4 kB) 2025-04-16 03:06:41.506066 | ubuntu-noble | #7 29.30 Collecting charset-normalizer<4,>=2 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.506092 | ubuntu-noble | #7 29.31 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (35 kB) 2025-04-16 03:06:41.655347 | ubuntu-noble | #7 29.34 Collecting idna<4,>=2.5 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.655431 | ubuntu-noble | #7 29.36 Downloading idna-3.10-py3-none-any.whl.metadata (10 kB) 2025-04-16 03:06:41.655451 | ubuntu-noble | #7 29.40 Collecting urllib3<3,>=1.21.1 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.655479 | ubuntu-noble | #7 29.42 Downloading urllib3-2.4.0-py3-none-any.whl.metadata (6.5 kB) 2025-04-16 03:06:41.767332 | ubuntu-noble | #7 29.47 Collecting certifi>=2017.4.17 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.767518 | ubuntu-noble | #7 29.49 Downloading certifi-2025.1.31-py3-none-any.whl.metadata (2.5 kB) 2025-04-16 03:06:41.767540 | ubuntu-noble | #7 29.55 Collecting python-dateutil>=2.7.0 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.767570 | ubuntu-noble | #7 29.57 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl.metadata (8.4 kB) 2025-04-16 03:06:41.875995 | ubuntu-noble | #7 29.60 Collecting types-python-dateutil>=2.8.10 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.876109 | ubuntu-noble | #7 29.61 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl.metadata (2.1 kB) 2025-04-16 03:06:41.876162 | ubuntu-noble | #7 29.65 Collecting markdown-it-py>=2.2.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.876179 | ubuntu-noble | #7 29.66 Downloading markdown_it_py-3.0.0-py3-none-any.whl.metadata (6.9 kB) 2025-04-16 03:06:41.876206 | ubuntu-noble | #7 29.71 Collecting pygments<3.0.0,>=2.13.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.986098 | ubuntu-noble | #7 29.72 Downloading pygments-2.19.1-py3-none-any.whl.metadata (2.5 kB) 2025-04-16 03:06:41.986207 | ubuntu-noble | #7 29.76 Collecting mdurl~=0.1 (from markdown-it-py>=2.2.0->rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:41.986326 | ubuntu-noble | #7 29.77 Downloading mdurl-0.1.2-py3-none-any.whl.metadata (1.6 kB) 2025-04-16 03:06:41.986367 | ubuntu-noble | #7 29.81 Collecting six>=1.5 (from python-dateutil>=2.7.0->arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-16 03:06:42.194610 | ubuntu-noble | #7 29.82 Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB) 2025-04-16 03:06:42.194705 | ubuntu-noble | #7 29.88 Downloading PyYAML-6.0.2-cp312-cp312-musllinux_1_1_x86_64.whl (756 kB) 2025-04-16 03:06:42.194737 | ubuntu-noble | #7 29.93 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 756.6/756.6 kB 30.0 MB/s eta 0:00:00 2025-04-16 03:06:43.529068 | ubuntu-noble | #7 29.94 Downloading ansible-11.4.0-py3-none-any.whl (54.2 MB) 2025-04-16 03:06:43.712722 | ubuntu-noble | #7 31.43 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.2/54.2 MB 36.5 MB/s eta 0:00:00 2025-04-16 03:06:43.712794 | ubuntu-noble | #7 31.44 Downloading click-8.1.8-py3-none-any.whl (98 kB) 2025-04-16 03:06:43.712813 | ubuntu-noble | #7 31.46 Downloading cookiecutter-2.6.0-py3-none-any.whl (39 kB) 2025-04-16 03:06:43.818225 | ubuntu-noble | #7 31.48 Downloading cryptography-44.0.2-cp39-abi3-musllinux_1_2_x86_64.whl (4.3 MB) 2025-04-16 03:06:43.818294 | ubuntu-noble | #7 31.61 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.3/4.3 MB 33.9 MB/s eta 0:00:00 2025-04-16 03:06:43.818315 | ubuntu-noble | #7 31.63 Downloading loguru-0.7.3-py3-none-any.whl (61 kB) 2025-04-16 03:06:43.925662 | ubuntu-noble | #7 31.65 Downloading oslo.utils-8.2.0-py3-none-any.whl (134 kB) 2025-04-16 03:06:43.925721 | ubuntu-noble | #7 31.67 Downloading paramiko-3.5.1-py3-none-any.whl (227 kB) 2025-04-16 03:06:43.925735 | ubuntu-noble | #7 31.70 Downloading passlib-1.7.4-py2.py3-none-any.whl (525 kB) 2025-04-16 03:06:43.925758 | ubuntu-noble | #7 31.72 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 525.6/525.6 kB 22.3 MB/s eta 0:00:00 2025-04-16 03:06:44.064732 | ubuntu-noble | #7 31.73 Downloading pycryptodome-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-04-16 03:06:44.064795 | ubuntu-noble | #7 31.81 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 32.1 MB/s eta 0:00:00 2025-04-16 03:06:44.064831 | ubuntu-noble | #7 31.82 Downloading pykeepass-4.1.1.post1-py3-none-any.whl (55 kB) 2025-04-16 03:06:44.064852 | ubuntu-noble | #7 31.84 Downloading python_gilt-1.2.3-py2.py3-none-any.whl (22 kB) 2025-04-16 03:06:44.166613 | ubuntu-noble | #7 31.86 Downloading ruamel.yaml-0.18.10-py3-none-any.whl (117 kB) 2025-04-16 03:06:44.166680 | ubuntu-noble | #7 31.88 Downloading yamllint-1.37.0-py3-none-any.whl (68 kB) 2025-04-16 03:06:44.166695 | ubuntu-noble | #7 31.89 Downloading ansible_core-2.18.4-py3-none-any.whl (2.2 MB) 2025-04-16 03:06:44.166720 | ubuntu-noble | #7 31.96 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.2/2.2 MB 33.2 MB/s eta 0:00:00 2025-04-16 03:06:44.309037 | ubuntu-noble | #7 31.98 Downloading argon2_cffi-23.1.0-py3-none-any.whl (15 kB) 2025-04-16 03:06:44.309125 | ubuntu-noble | #7 32.00 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl (363 kB) 2025-04-16 03:06:44.309143 | ubuntu-noble | #7 32.02 Downloading binaryornot-0.4.4-py2.py3-none-any.whl (9.0 kB) 2025-04-16 03:06:44.309158 | ubuntu-noble | #7 32.03 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl (488 kB) 2025-04-16 03:06:44.309172 | ubuntu-noble | #7 32.06 Downloading construct-2.10.70-py3-none-any.whl (63 kB) 2025-04-16 03:06:44.309199 | ubuntu-noble | #7 32.08 Downloading debtcollector-3.0.0-py3-none-any.whl (23 kB) 2025-04-16 03:06:44.464764 | ubuntu-noble | #7 32.10 Downloading iso8601-2.1.0-py3-none-any.whl (7.5 kB) 2025-04-16 03:06:44.464985 | ubuntu-noble | #7 32.12 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) 2025-04-16 03:06:44.465010 | ubuntu-noble | #7 32.14 Downloading netaddr-1.3.0-py3-none-any.whl (2.3 MB) 2025-04-16 03:06:44.465026 | ubuntu-noble | #7 32.21 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 33.1 MB/s eta 0:00:00 2025-04-16 03:06:44.465052 | ubuntu-noble | #7 32.22 Downloading oslo.i18n-6.5.1-py3-none-any.whl (46 kB) 2025-04-16 03:06:44.579515 | ubuntu-noble | #7 32.24 Downloading packaging-24.2-py3-none-any.whl (65 kB) 2025-04-16 03:06:44.579594 | ubuntu-noble | #7 32.26 Downloading pathspec-0.12.1-py3-none-any.whl (31 kB) 2025-04-16 03:06:44.579611 | ubuntu-noble | #7 32.28 Downloading pbr-6.1.1-py2.py3-none-any.whl (108 kB) 2025-04-16 03:06:44.579625 | ubuntu-noble | #7 32.29 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-04-16 03:06:44.579654 | ubuntu-noble | #7 32.36 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 33.2 MB/s eta 0:00:00 2025-04-16 03:06:44.693396 | ubuntu-noble | #7 32.38 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl (1.1 MB) 2025-04-16 03:06:44.693473 | ubuntu-noble | #7 32.41 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 32.9 MB/s eta 0:00:00 2025-04-16 03:06:44.693491 | ubuntu-noble | #7 32.43 Downloading pyotp-2.9.0-py3-none-any.whl (13 kB) 2025-04-16 03:06:44.693506 | ubuntu-noble | #7 32.44 Downloading pyparsing-3.2.3-py3-none-any.whl (111 kB) 2025-04-16 03:06:44.693519 | ubuntu-noble | #7 32.46 Downloading python_slugify-8.0.4-py2.py3-none-any.whl (10 kB) 2025-04-16 03:06:44.693532 | ubuntu-noble | #7 32.48 Downloading requests-2.32.3-py3-none-any.whl (64 kB) 2025-04-16 03:06:44.693558 | ubuntu-noble | #7 32.49 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl (745 kB) 2025-04-16 03:06:44.856832 | ubuntu-noble | #7 32.52 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 745.8/745.8 kB 29.4 MB/s eta 0:00:00 2025-04-16 03:06:44.856932 | ubuntu-noble | #7 32.54 Downloading tzdata-2025.2-py2.py3-none-any.whl (347 kB) 2025-04-16 03:06:44.856983 | ubuntu-noble | #7 32.56 Downloading arrow-1.3.0-py3-none-any.whl (66 kB) 2025-04-16 03:06:44.857002 | ubuntu-noble | #7 32.57 Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB) 2025-04-16 03:06:44.857016 | ubuntu-noble | #7 32.59 Downloading fasteners-0.19-py3-none-any.whl (18 kB) 2025-04-16 03:06:44.857042 | ubuntu-noble | #7 32.61 Downloading lxml-5.3.2-cp312-cp312-musllinux_1_2_x86_64.whl (5.1 MB) 2025-04-16 03:06:44.970521 | ubuntu-noble | #7 32.75 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.1/5.1 MB 35.4 MB/s eta 0:00:00 2025-04-16 03:06:45.082363 | ubuntu-noble | #7 32.77 Downloading rich-14.0.0-py3-none-any.whl (243 kB) 2025-04-16 03:06:45.082695 | ubuntu-noble | #7 32.79 Downloading sh-2.2.2-py3-none-any.whl (38 kB) 2025-04-16 03:06:45.082718 | ubuntu-noble | #7 32.81 Downloading certifi-2025.1.31-py3-none-any.whl (166 kB) 2025-04-16 03:06:45.082732 | ubuntu-noble | #7 32.83 Downloading chardet-5.2.0-py3-none-any.whl (199 kB) 2025-04-16 03:06:45.082744 | ubuntu-noble | #7 32.85 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl (146 kB) 2025-04-16 03:06:45.082765 | ubuntu-noble | #7 32.87 Downloading idna-3.10-py3-none-any.whl (70 kB) 2025-04-16 03:06:45.082803 | ubuntu-noble | #7 32.89 Downloading markdown_it_py-3.0.0-py3-none-any.whl (87 kB) 2025-04-16 03:06:45.187830 | ubuntu-noble | #7 32.91 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl (23 kB) 2025-04-16 03:06:45.188128 | ubuntu-noble | #7 32.93 Downloading pygments-2.19.1-py3-none-any.whl (1.2 MB) 2025-04-16 03:06:45.188155 | ubuntu-noble | #7 32.96 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 34.2 MB/s eta 0:00:00 2025-04-16 03:06:45.188170 | ubuntu-noble | #7 32.98 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl (229 kB) 2025-04-16 03:06:45.188197 | ubuntu-noble | #7 33.00 Downloading resolvelib-1.0.1-py2.py3-none-any.whl (17 kB) 2025-04-16 03:06:45.294179 | ubuntu-noble | #7 33.02 Downloading text_unidecode-1.3-py2.py3-none-any.whl (78 kB) 2025-04-16 03:06:45.294262 | ubuntu-noble | #7 33.03 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl (14 kB) 2025-04-16 03:06:45.294280 | ubuntu-noble | #7 33.05 Downloading urllib3-2.4.0-py3-none-any.whl (128 kB) 2025-04-16 03:06:45.294296 | ubuntu-noble | #7 33.07 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl (87 kB) 2025-04-16 03:06:45.294310 | ubuntu-noble | #7 33.09 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl (88 kB) 2025-04-16 03:06:45.294362 | ubuntu-noble | #7 33.10 Downloading pycparser-2.22-py3-none-any.whl (117 kB) 2025-04-16 03:06:45.771631 | ubuntu-noble | #7 33.12 Downloading setuptools-78.1.0-py3-none-any.whl (1.3 MB) 2025-04-16 03:06:45.771731 | ubuntu-noble | #7 33.16 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 36.1 MB/s eta 0:00:00 2025-04-16 03:06:45.771751 | ubuntu-noble | #7 33.17 Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) 2025-04-16 03:06:45.771765 | ubuntu-noble | #7 33.19 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB) 2025-04-16 03:06:45.771791 | ubuntu-noble | #7 33.67 Building wheels for collected packages: pwgen, psutil 2025-04-16 03:06:45.923494 | ubuntu-noble | #7 33.67 Building wheel for pwgen (pyproject.toml): started 2025-04-16 03:06:46.104626 | ubuntu-noble | #7 34.00 Building wheel for pwgen (pyproject.toml): finished with status 'done' 2025-04-16 03:06:46.267783 | ubuntu-noble | #7 34.01 Created wheel for pwgen: filename=pwgen-0.8.2.post0-py3-none-any.whl size=3798 sha256=b0cc4b9f420665f690425582d15cbf54c910def4b5afd9d3256e043c58beff42 2025-04-16 03:06:48.795455 | ubuntu-noble | #7 34.01 Stored in directory: /tmp/pip-ephem-wheel-cache-s3l6xutz/wheels/8e/56/bf/a88cd4e5b84752858d6db0c914d636211570e8a1e73b53b5dd 2025-04-16 03:06:48.795548 | ubuntu-noble | #7 34.01 Building wheel for psutil (pyproject.toml): started 2025-04-16 03:06:48.795581 | ubuntu-noble | #7 36.69 Building wheel for psutil (pyproject.toml): finished with status 'done' 2025-04-16 03:06:48.954198 | ubuntu-noble | #7 36.69 Created wheel for psutil: filename=psutil-7.0.0-cp36-abi3-linux_x86_64.whl size=277228 sha256=5af80ca1d59ed16fee4a2c54afee839d9ea0c7c448791c69471b2c39de005481 2025-04-16 03:06:49.244763 | ubuntu-noble | #7 36.70 Stored in directory: /tmp/pip-ephem-wheel-cache-s3l6xutz/wheels/0c/58/48/ccefe23b905f1dd76f8444f328ff2cfb1d4920a081f9d5d03d 2025-04-16 03:06:49.244859 | ubuntu-noble | #7 36.70 Successfully built pwgen psutil 2025-04-16 03:06:49.244895 | ubuntu-noble | #7 37.14 Installing collected packages: text-unidecode, resolvelib, pwgen, passlib, wrapt, urllib3, tzdata, types-python-dateutil, six, sh, setuptools, ruamel.yaml.clib, PyYAML, python-slugify, pyparsing, pyotp, pygments, pycryptodomex, pycryptodome, pycparser, psutil, pathspec, packaging, netaddr, mdurl, MarkupSafe, lxml, loguru, iso8601, idna, fasteners, construct, colorama, click, charset-normalizer, chardet, certifi, bcrypt, yamllint, ruamel.yaml, requests, python-gilt, python-dateutil, pbr, markdown-it-py, Jinja2, debtcollector, cffi, binaryornot, rich, pynacl, oslo.i18n, cryptography, arrow, argon2-cffi-bindings, paramiko, oslo.utils, cookiecutter, argon2_cffi, ansible-core, pykeepass, ansible 2025-04-16 03:07:37.000808 | ubuntu-noble | #7 84.90 Successfully installed Jinja2-3.1.6 MarkupSafe-3.0.2 PyYAML-6.0.2 ansible-11.4.0 ansible-core-2.18.4 argon2-cffi-bindings-21.2.0 argon2_cffi-23.1.0 arrow-1.3.0 bcrypt-4.3.0 binaryornot-0.4.4 certifi-2025.1.31 cffi-1.17.1 chardet-5.2.0 charset-normalizer-3.4.1 click-8.1.8 colorama-0.4.6 construct-2.10.70 cookiecutter-2.6.0 cryptography-44.0.2 debtcollector-3.0.0 fasteners-0.19 idna-3.10 iso8601-2.1.0 loguru-0.7.3 lxml-5.3.2 markdown-it-py-3.0.0 mdurl-0.1.2 netaddr-1.3.0 oslo.i18n-6.5.1 oslo.utils-8.2.0 packaging-24.2 paramiko-3.5.1 passlib-1.7.4 pathspec-0.12.1 pbr-6.1.1 psutil-7.0.0 pwgen-0.8.2.post0 pycparser-2.22 pycryptodome-3.22.0 pycryptodomex-3.22.0 pygments-2.19.1 pykeepass-4.1.1.post1 pynacl-1.5.0 pyotp-2.9.0 pyparsing-3.2.3 python-dateutil-2.9.0.post0 python-gilt-1.2.3 python-slugify-8.0.4 requests-2.32.3 resolvelib-1.0.1 rich-14.0.0 ruamel.yaml-0.18.10 ruamel.yaml.clib-0.2.12 setuptools-78.1.0 sh-2.2.2 six-1.17.0 text-unidecode-1.3 types-python-dateutil-2.9.0.20241206 tzdata-2025.2 urllib3-2.4.0 wrapt-1.17.2 yamllint-1.37.0 2025-04-16 03:07:37.150915 | ubuntu-noble | #7 84.90 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning. 2025-04-16 03:07:37.366585 | ubuntu-noble | #7 85.26 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/main: No such file or directory 2025-04-16 03:07:37.470266 | ubuntu-noble | #7 85.26 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/community: No such file or directory 2025-04-16 03:07:37.470447 | ubuntu-noble | #7 85.27 (1/36) Purging .build-deps (20250416.030614) 2025-04-16 03:07:37.570076 | ubuntu-noble | #7 85.27 (2/36) Purging build-base (0.5-r3) 2025-04-16 03:07:37.570682 | ubuntu-noble | #7 85.27 (3/36) Purging file (5.46-r2) 2025-04-16 03:07:37.570733 | ubuntu-noble | #7 85.27 (4/36) Purging g++ (14.2.0-r4) 2025-04-16 03:07:37.570750 | ubuntu-noble | #7 85.27 (5/36) Purging libstdc++-dev (14.2.0-r4) 2025-04-16 03:07:37.570764 | ubuntu-noble | #7 85.29 (6/36) Purging make (4.4.1-r2) 2025-04-16 03:07:37.570799 | ubuntu-noble | #7 85.29 (7/36) Purging fortify-headers (1.1-r5) 2025-04-16 03:07:37.570832 | ubuntu-noble | #7 85.29 (8/36) Purging patch (2.7.6-r10) 2025-04-16 03:07:37.570848 | ubuntu-noble | #7 85.29 (9/36) Purging cargo (1.83.0-r0) 2025-04-16 03:07:37.570861 | ubuntu-noble | #7 85.30 (10/36) Purging libffi-dev (3.4.7-r0) 2025-04-16 03:07:37.570875 | ubuntu-noble | #7 85.30 (11/36) Purging linux-headers (6.6-r1) 2025-04-16 03:07:37.570889 | ubuntu-noble | #7 85.32 (12/36) Purging openssl-dev (3.3.3-r0) 2025-04-16 03:07:37.570903 | ubuntu-noble | #7 85.32 (13/36) Purging python3-dev (3.12.10-r0) 2025-04-16 03:07:37.571136 | ubuntu-noble | #7 85.34 (14/36) Purging python3-pyc (3.12.10-r0) 2025-04-16 03:07:37.571159 | ubuntu-noble | #7 85.34 (15/36) Purging python3-pycache-pyc0 (3.12.10-r0) 2025-04-16 03:07:37.571695 | ubuntu-noble | #7 85.35 (16/36) Purging pyc (3.12.10-r0) 2025-04-16 03:07:37.571727 | ubuntu-noble | #7 85.35 (17/36) Purging python3 (3.12.10-r0) 2025-04-16 03:07:37.571879 | ubuntu-noble | #7 85.37 (18/36) Purging rust (1.83.0-r0) 2025-04-16 03:07:37.571910 | ubuntu-noble | #7 85.40 (19/36) Purging gcc (14.2.0-r4) 2025-04-16 03:07:37.728375 | ubuntu-noble | #7 85.43 (20/36) Purging binutils (2.43.1-r2) 2025-04-16 03:07:37.738255 | ubuntu-noble | #7 85.44 (21/36) Purging libatomic (14.2.0-r4) 2025-04-16 03:07:37.738288 | ubuntu-noble | #7 85.44 (22/36) Purging libgomp (14.2.0-r4) 2025-04-16 03:07:37.738297 | ubuntu-noble | #7 85.44 (23/36) Purging musl-dev (1.2.5-r9) 2025-04-16 03:07:37.738305 | ubuntu-noble | #7 85.44 (24/36) Purging isl26 (0.26-r1) 2025-04-16 03:07:37.738313 | ubuntu-noble | #7 85.44 (25/36) Purging jansson (2.14-r4) 2025-04-16 03:07:37.738321 | ubuntu-noble | #7 85.44 (26/36) Purging libmagic (5.46-r2) 2025-04-16 03:07:37.738342 | ubuntu-noble | #7 85.44 (27/36) Purging llvm19-libs (19.1.4-r1) 2025-04-16 03:07:37.738349 | ubuntu-noble | #7 85.47 (28/36) Purging mpc1 (1.3.1-r1) 2025-04-16 03:07:37.738355 | ubuntu-noble | #7 85.47 (29/36) Purging mpdecimal (4.0.0-r0) 2025-04-16 03:07:37.738362 | ubuntu-noble | #7 85.47 (30/36) Purging mpfr4 (4.2.1-r0) 2025-04-16 03:07:37.738368 | ubuntu-noble | #7 85.47 (31/36) Purging pkgconf (2.3.0-r0) 2025-04-16 03:07:37.738375 | ubuntu-noble | #7 85.47 (32/36) Purging scudo-malloc (19.1.4-r0) 2025-04-16 03:07:37.738382 | ubuntu-noble | #7 85.47 (33/36) Purging gmp (6.3.0-r2) 2025-04-16 03:07:37.738388 | ubuntu-noble | #7 85.47 (34/36) Purging libstdc++ (14.2.0-r4) 2025-04-16 03:07:37.738401 | ubuntu-noble | #7 85.47 (35/36) Purging libgcc (14.2.0-r4) 2025-04-16 03:07:37.879682 | ubuntu-noble | #7 85.47 (36/36) Purging libxml2 (2.13.4-r5) 2025-04-16 03:07:37.879765 | ubuntu-noble | #7 85.47 Executing busybox-1.37.0-r12.trigger 2025-04-16 03:07:37.879804 | ubuntu-noble | #7 85.48 OK: 26 MiB in 52 packages 2025-04-16 03:07:37.879830 | ubuntu-noble | #7 DONE 85.8s 2025-04-16 03:07:38.034254 | ubuntu-noble | 2025-04-16 03:07:38.046459 | ubuntu-noble | #8 [4/5] COPY . /data 2025-04-16 03:07:38.046551 | ubuntu-noble | #8 DONE 0.2s 2025-04-16 03:07:38.255437 | ubuntu-noble | 2025-04-16 03:07:38.255478 | ubuntu-noble | #9 [5/5] WORKDIR /data 2025-04-16 03:07:38.255486 | ubuntu-noble | #9 DONE 0.0s 2025-04-16 03:07:38.255492 | ubuntu-noble | 2025-04-16 03:07:38.255501 | ubuntu-noble | #10 exporting to image 2025-04-16 03:07:44.610995 | ubuntu-noble | #10 exporting layers 2025-04-16 03:07:44.611108 | ubuntu-noble | #10 exporting layers 6.5s done 2025-04-16 03:07:44.722250 | ubuntu-noble | #10 writing image sha256:110e6b7fac57b1bbce8f8998d0f97c105daaa83b21f1e33f23a342560bd287d5 done 2025-04-16 03:07:44.733069 | ubuntu-noble | #10 naming to docker.io/library/724942f done 2025-04-16 03:07:44.733298 | ubuntu-noble | #10 DONE 6.5s 2025-04-16 03:07:44.781420 | ubuntu-noble | changed 2025-04-16 03:07:44.795550 | 2025-04-16 03:07:44.795653 | TASK [Run push script] 2025-04-16 03:07:45.127705 | ubuntu-noble | ++ git rev-parse --short HEAD 2025-04-16 03:07:45.129301 | ubuntu-noble | + revision=724942f 2025-04-16 03:07:45.129331 | ubuntu-noble | + [[ -n osism.harbor.regio.digital ]] 2025-04-16 03:07:45.129339 | ubuntu-noble | + repository=osism.harbor.regio.digital/osism/cookiecutter 2025-04-16 03:07:45.129360 | ubuntu-noble | + docker tag 724942f osism.harbor.regio.digital/osism/cookiecutter:latest 2025-04-16 03:07:45.164284 | ubuntu-noble | + docker push osism.harbor.regio.digital/osism/cookiecutter:latest 2025-04-16 03:07:45.193816 | ubuntu-noble | The push refers to repository [osism.harbor.regio.digital/osism/cookiecutter] 2025-04-16 03:07:45.227834 | ubuntu-noble | 5f70bf18a086: Preparing 2025-04-16 03:07:45.227867 | ubuntu-noble | 966c1e9f9722: Preparing 2025-04-16 03:07:45.227880 | ubuntu-noble | 476b3a312488: Preparing 2025-04-16 03:07:45.227885 | ubuntu-noble | 274d8e1291d3: Preparing 2025-04-16 03:07:45.227892 | ubuntu-noble | c5f83227c988: Preparing 2025-04-16 03:07:45.227897 | ubuntu-noble | 5a73889e102c: Preparing 2025-04-16 03:07:45.227901 | ubuntu-noble | 2748e349efd5: Preparing 2025-04-16 03:07:45.227933 | ubuntu-noble | 08000c18d16d: Preparing 2025-04-16 03:07:45.229028 | ubuntu-noble | 5a73889e102c: Waiting 2025-04-16 03:07:45.981143 | ubuntu-noble | 2748e349efd5: Waiting 2025-04-16 03:07:45.981709 | ubuntu-noble | 08000c18d16d: Waiting 2025-04-16 03:07:45.981752 | ubuntu-noble | c5f83227c988: Layer already exists 2025-04-16 03:07:46.425024 | ubuntu-noble | 5a73889e102c: Layer already exists 2025-04-16 03:07:46.884545 | ubuntu-noble | 2748e349efd5: Layer already exists 2025-04-16 03:07:47.249585 | ubuntu-noble | 08000c18d16d: Layer already exists 2025-04-16 03:07:49.112290 | ubuntu-noble | 274d8e1291d3: Pushed 2025-04-16 03:07:49.347484 | ubuntu-noble | 5f70bf18a086: Pushed 2025-04-16 03:07:49.623896 | ubuntu-noble | 966c1e9f9722: Pushed 2025-04-16 03:08:20.412056 | ubuntu-noble | 476b3a312488: Pushed 2025-04-16 03:08:24.728500 | ubuntu-noble | latest: digest: sha256:8021d607fde8952959c3c5bec02327a540440ad7c892294bbe55cf2b80937be6 size: 1993 2025-04-16 03:08:24.869529 | ubuntu-noble | changed 2025-04-16 03:08:24.916445 | 2025-04-16 03:08:24.916537 | PLAY RECAP 2025-04-16 03:08:24.916589 | ubuntu-noble | ok: 3 changed: 3 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-04-16 03:08:24.916614 | 2025-04-16 03:08:25.097599 | RUN END RESULT_NORMAL: [untrusted : github.com/osism/cfg-cookiecutter/playbooks/build.yml@main] 2025-04-16 03:08:25.101052 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-04-16 03:08:26.149295 | 2025-04-16 03:08:26.149410 | PLAY [Base post] 2025-04-16 03:08:26.169854 | 2025-04-16 03:08:26.169961 | TASK [remove-build-sshkey : Remove the build SSH key from all nodes] 2025-04-16 03:08:26.901935 | ubuntu-noble | changed 2025-04-16 03:08:26.943970 | 2025-04-16 03:08:26.944064 | PLAY RECAP 2025-04-16 03:08:26.944113 | ubuntu-noble | ok: 1 changed: 1 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-04-16 03:08:26.944165 | 2025-04-16 03:08:27.051117 | POST-RUN END RESULT_NORMAL: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-04-16 03:08:27.054079 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post-logs.yaml@main] 2025-04-16 03:08:28.067342 | 2025-04-16 03:08:28.067466 | PLAY [Base post-logs] 2025-04-16 03:08:28.083476 | 2025-04-16 03:08:28.083598 | TASK [generate-zuul-manifest : Generate Zuul manifest] 2025-04-16 03:08:28.899230 | localhost | changed 2025-04-16 03:08:28.902613 | 2025-04-16 03:08:28.902732 | TASK [generate-zuul-manifest : Return Zuul manifest URL to Zuul] 2025-04-16 03:08:28.952645 | localhost | ok 2025-04-16 03:08:28.958798 | 2025-04-16 03:08:28.958884 | TASK [Set zuul-log-path fact] 2025-04-16 03:08:28.995806 | localhost | ok 2025-04-16 03:08:29.005800 | 2025-04-16 03:08:29.005909 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-04-16 03:08:29.065658 | localhost | ok 2025-04-16 03:08:29.071021 | 2025-04-16 03:08:29.071111 | TASK [upload-logs : Create log directories] 2025-04-16 03:08:30.034554 | localhost | changed 2025-04-16 03:08:30.038449 | 2025-04-16 03:08:30.038541 | TASK [upload-logs : Ensure logs are readable before uploading] 2025-04-16 03:08:31.058579 | localhost -> localhost | ok: Runtime: 0:00:00.040175 2025-04-16 03:08:31.062619 | 2025-04-16 03:08:31.062723 | TASK [upload-logs : Upload logs to log server] 2025-04-16 03:08:31.779789 | localhost | Output suppressed because no_log was given 2025-04-16 03:08:31.782749 | 2025-04-16 03:08:31.782833 | LOOP [upload-logs : Compress console log and json output] 2025-04-16 03:08:31.876374 | localhost | skipping: Conditional result was False 2025-04-16 03:08:31.881358 | localhost | skipping: Conditional result was False 2025-04-16 03:08:31.890594 | 2025-04-16 03:08:31.890680 | LOOP [upload-logs : Upload compressed console log and json output] 2025-04-16 03:08:31.958404 | localhost | skipping: Conditional result was False 2025-04-16 03:08:31.958613 | 2025-04-16 03:08:31.959246 | localhost | skipping: Conditional result was False 2025-04-16 03:08:31.969954 | 2025-04-16 03:08:31.970042 | LOOP [upload-logs : Upload console log and json output]