2025-03-26 03:15:00.792486 | Job console starting... 2025-03-26 03:15:00.812797 | Updating repositories 2025-03-26 03:15:00.829297 | Preparing job workspace 2025-03-26 03:15:01.875085 | Running Ansible setup... 2025-03-26 03:15:07.593393 | PRE-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/pre.yaml@main] 2025-03-26 03:15:08.327816 | 2025-03-26 03:15:08.327985 | PLAY [Base pre] 2025-03-26 03:15:08.357471 | 2025-03-26 03:15:08.357596 | TASK [Setup log path fact] 2025-03-26 03:15:08.389573 | ubuntu-noble | ok 2025-03-26 03:15:08.409687 | 2025-03-26 03:15:08.409808 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-03-26 03:15:08.456957 | ubuntu-noble | ok 2025-03-26 03:15:08.480812 | 2025-03-26 03:15:08.480984 | TASK [emit-job-header : Print job information] 2025-03-26 03:15:08.536789 | # Job Information 2025-03-26 03:15:08.537132 | Ansible Version: 2.15.3 2025-03-26 03:15:08.537189 | Job: container-image-cfg-cookiecutter-push 2025-03-26 03:15:08.537229 | Pipeline: periodic-daily 2025-03-26 03:15:08.537256 | Executor: 7d211f194f6a 2025-03-26 03:15:08.537281 | Triggered by: https://github.com/osism/cfg-cookiecutter 2025-03-26 03:15:08.537305 | Event ID: 1b54c10f967f49219a6118174f7d0951 2025-03-26 03:15:08.544286 | 2025-03-26 03:15:08.544425 | LOOP [emit-job-header : Print node information] 2025-03-26 03:15:08.699249 | ubuntu-noble | ok: 2025-03-26 03:15:08.699549 | ubuntu-noble | # Node Information 2025-03-26 03:15:08.699601 | ubuntu-noble | Inventory Hostname: ubuntu-noble 2025-03-26 03:15:08.699628 | ubuntu-noble | Hostname: ubuntu 2025-03-26 03:15:08.699651 | ubuntu-noble | Username: zuul 2025-03-26 03:15:08.699672 | ubuntu-noble | Distro: Ubuntu 24.04 2025-03-26 03:15:08.699697 | ubuntu-noble | Provider: regiocloud-a 2025-03-26 03:15:08.699718 | ubuntu-noble | Label: ubuntu-noble 2025-03-26 03:15:08.699740 | ubuntu-noble | Product Name: OpenStack Nova 2025-03-26 03:15:08.699761 | ubuntu-noble | Interface IP: 81.163.192.120 2025-03-26 03:15:08.722716 | 2025-03-26 03:15:08.722853 | TASK [log-inventory : Ensure Zuul Ansible directory exists] 2025-03-26 03:15:09.257993 | ubuntu-noble -> localhost | changed 2025-03-26 03:15:09.266407 | 2025-03-26 03:15:09.266529 | TASK [log-inventory : Copy ansible inventory to logs dir] 2025-03-26 03:15:10.401834 | ubuntu-noble -> localhost | changed 2025-03-26 03:15:10.425842 | 2025-03-26 03:15:10.426018 | TASK [add-build-sshkey : Check to see if ssh key was already created for this build] 2025-03-26 03:15:10.743038 | ubuntu-noble -> localhost | ok 2025-03-26 03:15:10.755899 | 2025-03-26 03:15:10.756096 | TASK [add-build-sshkey : Create a new key in workspace based on build UUID] 2025-03-26 03:15:10.805673 | ubuntu-noble | ok 2025-03-26 03:15:10.826247 | ubuntu-noble | included: /var/lib/zuul/builds/97ca6c59e1ae426faf0a8bd9c65bd2e3/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/create-key-and-replace.yaml 2025-03-26 03:15:10.834251 | 2025-03-26 03:15:10.834350 | TASK [add-build-sshkey : Create Temp SSH key] 2025-03-26 03:15:11.728862 | ubuntu-noble -> localhost | Generating public/private rsa key pair. 2025-03-26 03:15:11.729139 | ubuntu-noble -> localhost | Your identification has been saved in /var/lib/zuul/builds/97ca6c59e1ae426faf0a8bd9c65bd2e3/work/97ca6c59e1ae426faf0a8bd9c65bd2e3_id_rsa 2025-03-26 03:15:11.729180 | ubuntu-noble -> localhost | Your public key has been saved in /var/lib/zuul/builds/97ca6c59e1ae426faf0a8bd9c65bd2e3/work/97ca6c59e1ae426faf0a8bd9c65bd2e3_id_rsa.pub 2025-03-26 03:15:11.729204 | ubuntu-noble -> localhost | The key fingerprint is: 2025-03-26 03:15:11.729228 | ubuntu-noble -> localhost | SHA256:7PCyP8SssoJ2QSj3c9guBB+HGolkhKONC+nmETmoGgw zuul-build-sshkey 2025-03-26 03:15:11.729249 | ubuntu-noble -> localhost | The key's randomart image is: 2025-03-26 03:15:11.729269 | ubuntu-noble -> localhost | +---[RSA 3072]----+ 2025-03-26 03:15:11.729289 | ubuntu-noble -> localhost | |o. | 2025-03-26 03:15:11.729310 | ubuntu-noble -> localhost | |oo | 2025-03-26 03:15:11.729329 | ubuntu-noble -> localhost | |=*o. . | 2025-03-26 03:15:11.729358 | ubuntu-noble -> localhost | |E=*.o .. | 2025-03-26 03:15:11.729378 | ubuntu-noble -> localhost | |Bo+* =.oS | 2025-03-26 03:15:11.729397 | ubuntu-noble -> localhost | |+=..* o++ | 2025-03-26 03:15:11.729425 | ubuntu-noble -> localhost | |+o...+.oo | 2025-03-26 03:15:11.729447 | ubuntu-noble -> localhost | |oo..o oo. | 2025-03-26 03:15:11.729466 | ubuntu-noble -> localhost | |. ...+.... | 2025-03-26 03:15:11.729485 | ubuntu-noble -> localhost | +----[SHA256]-----+ 2025-03-26 03:15:11.729537 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.427859 2025-03-26 03:15:11.741480 | 2025-03-26 03:15:11.741598 | TASK [add-build-sshkey : Remote setup ssh keys (linux)] 2025-03-26 03:15:11.773206 | ubuntu-noble | ok 2025-03-26 03:15:11.785293 | ubuntu-noble | included: /var/lib/zuul/builds/97ca6c59e1ae426faf0a8bd9c65bd2e3/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/remote-linux.yaml 2025-03-26 03:15:11.795787 | 2025-03-26 03:15:11.795892 | TASK [add-build-sshkey : Remove previously added zuul-build-sshkey] 2025-03-26 03:15:11.820681 | ubuntu-noble | skipping: Conditional result was False 2025-03-26 03:15:11.829254 | 2025-03-26 03:15:11.829363 | TASK [add-build-sshkey : Enable access via build key on all nodes] 2025-03-26 03:15:12.717649 | ubuntu-noble | changed 2025-03-26 03:15:12.727764 | 2025-03-26 03:15:12.727893 | TASK [add-build-sshkey : Make sure user has a .ssh] 2025-03-26 03:15:13.056231 | ubuntu-noble | ok 2025-03-26 03:15:13.066127 | 2025-03-26 03:15:13.066259 | TASK [add-build-sshkey : Install build private key as SSH key on all nodes] 2025-03-26 03:15:13.857648 | ubuntu-noble | changed 2025-03-26 03:15:13.866198 | 2025-03-26 03:15:13.866321 | TASK [add-build-sshkey : Install build public key as SSH key on all nodes] 2025-03-26 03:15:14.639042 | ubuntu-noble | changed 2025-03-26 03:15:14.649610 | 2025-03-26 03:15:14.649743 | TASK [add-build-sshkey : Remote setup ssh keys (windows)] 2025-03-26 03:15:14.685119 | ubuntu-noble | skipping: Conditional result was False 2025-03-26 03:15:14.697361 | 2025-03-26 03:15:14.697508 | TASK [remove-zuul-sshkey : Remove master key from local agent] 2025-03-26 03:15:15.143328 | ubuntu-noble -> localhost | changed 2025-03-26 03:15:15.168378 | 2025-03-26 03:15:15.168562 | TASK [add-build-sshkey : Add back temp key] 2025-03-26 03:15:15.540835 | ubuntu-noble -> localhost | Identity added: /var/lib/zuul/builds/97ca6c59e1ae426faf0a8bd9c65bd2e3/work/97ca6c59e1ae426faf0a8bd9c65bd2e3_id_rsa (zuul-build-sshkey) 2025-03-26 03:15:15.541189 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.011849 2025-03-26 03:15:15.559227 | 2025-03-26 03:15:15.559363 | TASK [add-build-sshkey : Verify we can still SSH to all nodes] 2025-03-26 03:15:16.066004 | ubuntu-noble | ok 2025-03-26 03:15:16.075414 | 2025-03-26 03:15:16.075548 | TASK [add-build-sshkey : Verify we can still SSH to all nodes (windows)] 2025-03-26 03:15:16.111433 | ubuntu-noble | skipping: Conditional result was False 2025-03-26 03:15:16.135803 | 2025-03-26 03:15:16.135948 | TASK [start-zuul-console : Start zuul_console daemon.] 2025-03-26 03:15:16.659314 | ubuntu-noble | ok 2025-03-26 03:15:16.676998 | 2025-03-26 03:15:16.677276 | TASK [validate-host : Define zuul_info_dir fact] 2025-03-26 03:15:16.722693 | ubuntu-noble | ok 2025-03-26 03:15:16.730001 | 2025-03-26 03:15:16.730115 | TASK [validate-host : Ensure Zuul Ansible directory exists] 2025-03-26 03:15:17.081697 | ubuntu-noble -> localhost | ok 2025-03-26 03:15:17.096456 | 2025-03-26 03:15:17.096625 | TASK [validate-host : Collect information about the host] 2025-03-26 03:15:18.426809 | ubuntu-noble | ok 2025-03-26 03:15:18.453123 | 2025-03-26 03:15:18.453357 | TASK [validate-host : Sanitize hostname] 2025-03-26 03:15:18.554112 | ubuntu-noble | ok 2025-03-26 03:15:18.563128 | 2025-03-26 03:15:18.563244 | TASK [validate-host : Write out all ansible variables/facts known for each host] 2025-03-26 03:15:19.146204 | ubuntu-noble -> localhost | changed 2025-03-26 03:15:19.154561 | 2025-03-26 03:15:19.154915 | TASK [validate-host : Collect information about zuul worker] 2025-03-26 03:15:19.638035 | ubuntu-noble | ok 2025-03-26 03:15:19.644791 | 2025-03-26 03:15:19.644969 | TASK [validate-host : Write out all zuul information for each host] 2025-03-26 03:15:20.213331 | ubuntu-noble -> localhost | changed 2025-03-26 03:15:20.234561 | 2025-03-26 03:15:20.234696 | TASK [prepare-workspace-log : Start zuul_console daemon.] 2025-03-26 03:15:20.522986 | ubuntu-noble | ok 2025-03-26 03:15:20.530954 | 2025-03-26 03:15:20.531069 | TASK [prepare-workspace-log : Synchronize src repos to workspace directory.] 2025-03-26 03:15:21.394065 | ubuntu-noble | changed: 2025-03-26 03:15:21.394276 | ubuntu-noble | cd+++++++++ src/ 2025-03-26 03:15:21.394313 | ubuntu-noble | cd+++++++++ src/github.com/ 2025-03-26 03:15:21.394338 | ubuntu-noble | cd+++++++++ src/github.com/osism/ 2025-03-26 03:15:21.394360 | ubuntu-noble | cd+++++++++ src/github.com/osism/cfg-cookiecutter/ 2025-03-26 03:15:21.394381 | ubuntu-noble | Containerfile 2025-03-26 03:15:21.394512 | ubuntu-noble | 3.4.7-r0) 2025-03-26 03:16:29.969180 | ubuntu-noble | #7 5.507 (22/37) Installing libxml2 (2.13.4-r5) 2025-03-26 03:16:29.969193 | ubuntu-noble | #7 5.541 (23/37) Installing llvm19-libs (19.1.4-r0) 2025-03-26 03:16:29.969216 | ubuntu-noble | #7 7.302 (24/37) Installing scudo-malloc (19.1.4-r0) 2025-03-26 03:16:30.135242 | ubuntu-noble | #7 7.316 (25/37) Installing rust (1.83.0-r0) 2025-03-26 03:16:32.711749 | ubuntu-noble | #7 10.04 (26/37) Installing cargo (1.83.0-r0) 2025-03-26 03:16:33.066058 | ubuntu-noble | #7 10.40 (27/37) Installing linux-headers (6.6-r1) 2025-03-26 03:16:33.251050 | ubuntu-noble | #7 10.58 (28/37) Installing pkgconf (2.3.0-r0) 2025-03-26 03:16:33.496533 | ubuntu-noble | #7 10.60 (29/37) Installing libffi-dev (3.4.7-r0) 2025-03-26 03:16:33.665240 | ubuntu-noble | #7 10.62 (30/37) Installing openssl-dev (3.3.3-r0) 2025-03-26 03:16:33.665290 | ubuntu-noble | #7 10.66 (31/37) Installing mpdecimal (4.0.0-r0) 2025-03-26 03:16:33.665636 | ubuntu-noble | #7 10.68 (32/37) Installing python3 (3.12.9-r0) 2025-03-26 03:16:33.665655 | ubuntu-noble | #7 11.00 (33/37) Installing python3-pycache-pyc0 (3.12.9-r0) 2025-03-26 03:16:33.837855 | ubuntu-noble | #7 11.17 (34/37) Installing pyc (3.12.9-r0) 2025-03-26 03:16:35.341909 | ubuntu-noble | #7 11.17 (35/37) Installing python3-pyc (3.12.9-r0) 2025-03-26 03:16:35.342016 | ubuntu-noble | #7 11.17 (36/37) Installing python3-dev (3.12.9-r0) 2025-03-26 03:16:35.342035 | ubuntu-noble | #7 12.67 (37/37) Installing .build-deps (20250326.031625) 2025-03-26 03:16:35.502290 | ubuntu-noble | #7 12.68 Executing busybox-1.37.0-r12.trigger 2025-03-26 03:16:39.251676 | ubuntu-noble | #7 12.68 OK: 760 MiB in 88 packages 2025-03-26 03:16:39.251775 | ubuntu-noble | #7 16.58 Collecting pip==25.0.1 2025-03-26 03:16:39.409188 | ubuntu-noble | #7 16.64 Downloading pip-25.0.1-py3-none-any.whl.metadata (3.7 kB) 2025-03-26 03:16:39.513781 | ubuntu-noble | #7 16.66 Downloading pip-25.0.1-py3-none-any.whl (1.8 MB) 2025-03-26 03:16:39.513874 | ubuntu-noble | #7 16.74 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.8/1.8 MB 32.4 MB/s eta 0:00:00 2025-03-26 03:16:39.694493 | ubuntu-noble | #7 16.78 Installing collected packages: pip 2025-03-26 03:16:39.694617 | ubuntu-noble | #7 16.78 Attempting uninstall: pip 2025-03-26 03:16:39.694735 | ubuntu-noble | #7 16.79 Found existing installation: pip 24.3.1 2025-03-26 03:16:39.694773 | ubuntu-noble | #7 16.85 Uninstalling pip-24.3.1: 2025-03-26 03:16:39.694817 | ubuntu-noble | #7 17.03 Successfully uninstalled pip-24.3.1 2025-03-26 03:16:41.505411 | ubuntu-noble | #7 18.84 Successfully installed pip-25.0.1 2025-03-26 03:16:41.657715 | ubuntu-noble | #7 18.84 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable.It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning. 2025-03-26 03:16:42.619787 | ubuntu-noble | #7 19.95 Collecting PyYAML==6.0.2 (from -r /tmp/requirements.txt (line 1)) 2025-03-26 03:16:42.756052 | ubuntu-noble | #7 20.01 Downloading PyYAML-6.0.2-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (2.1 kB) 2025-03-26 03:16:42.867684 | ubuntu-noble | #7 20.09 Collecting ansible==11.3.0 (from -r /tmp/requirements.txt (line 2)) 2025-03-26 03:16:42.867907 | ubuntu-noble | #7 20.10 Downloading ansible-11.3.0-py3-none-any.whl.metadata (8.0 kB) 2025-03-26 03:16:43.107250 | ubuntu-noble | #7 20.14 Collecting click==8.1.8 (from -r /tmp/requirements.txt (line 3)) 2025-03-26 03:16:43.107396 | ubuntu-noble | #7 20.15 Downloading click-8.1.8-py3-none-any.whl.metadata (2.3 kB) 2025-03-26 03:16:43.107425 | ubuntu-noble | #7 20.18 Collecting cookiecutter==2.6.0 (from -r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:43.107450 | ubuntu-noble | #7 20.20 Downloading cookiecutter-2.6.0-py3-none-any.whl.metadata (7.3 kB) 2025-03-26 03:16:43.107490 | ubuntu-noble | #7 20.44 Collecting cryptography==44.0.2 (from -r /tmp/requirements.txt (line 5)) 2025-03-26 03:16:43.249107 | ubuntu-noble | #7 20.45 Downloading cryptography-44.0.2-cp39-abi3-musllinux_1_2_x86_64.whl.metadata (5.7 kB) 2025-03-26 03:16:43.362794 | ubuntu-noble | #7 20.48 Collecting loguru==0.7.3 (from -r /tmp/requirements.txt (line 6)) 2025-03-26 03:16:43.362845 | ubuntu-noble | #7 20.50 Downloading loguru-0.7.3-py3-none-any.whl.metadata (22 kB) 2025-03-26 03:16:43.362852 | ubuntu-noble | #7 20.58 Collecting oslo.utils==8.2.0 (from -r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:43.362865 | ubuntu-noble | #7 20.60 Downloading oslo.utils-8.2.0-py3-none-any.whl.metadata (2.2 kB) 2025-03-26 03:16:43.573293 | ubuntu-noble | #7 20.65 Collecting paramiko==3.5.1 (from -r /tmp/requirements.txt (line 8)) 2025-03-26 03:16:43.573480 | ubuntu-noble | #7 20.67 Downloading paramiko-3.5.1-py3-none-any.whl.metadata (4.6 kB) 2025-03-26 03:16:43.573511 | ubuntu-noble | #7 20.70 Collecting passlib==1.7.4 (from -r /tmp/requirements.txt (line 9)) 2025-03-26 03:16:43.573555 | ubuntu-noble | #7 20.71 Downloading passlib-1.7.4-py2.py3-none-any.whl.metadata (1.7 kB) 2025-03-26 03:16:46.405216 | ubuntu-noble | #7 20.73 Collecting pwgen==0.8.2.post0 (from -r /tmp/requirements.txt (line 10)) 2025-03-26 03:16:46.405466 | ubuntu-noble | #7 20.75 Downloading pwgen-0.8.2.post0.tar.gz (2.9 kB) 2025-03-26 03:16:46.405478 | ubuntu-noble | #7 20.75 Installing build dependencies: started 2025-03-26 03:16:46.405492 | ubuntu-noble | #7 23.74 Installing build dependencies: finished with status 'done' 2025-03-26 03:16:46.559504 | ubuntu-noble | #7 23.74 Getting requirements to build wheel: started 2025-03-26 03:16:46.765227 | ubuntu-noble | #7 24.10 Getting requirements to build wheel: finished with status 'done' 2025-03-26 03:16:46.917954 | ubuntu-noble | #7 24.10 Preparing metadata (pyproject.toml): started 2025-03-26 03:16:47.102073 | ubuntu-noble | #7 24.43 Preparing metadata (pyproject.toml): finished with status 'done' 2025-03-26 03:16:47.326290 | ubuntu-noble | #7 24.66 Collecting pycryptodome==3.22.0 (from -r /tmp/requirements.txt (line 11)) 2025-03-26 03:16:47.426146 | ubuntu-noble | #7 24.67 Downloading pycryptodome-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB) 2025-03-26 03:16:47.592940 | ubuntu-noble | #7 24.70 Collecting pykeepass==4.1.1.post1 (from -r /tmp/requirements.txt (line 12)) 2025-03-26 03:16:47.593038 | ubuntu-noble | #7 24.72 Downloading pykeepass-4.1.1.post1-py3-none-any.whl.metadata (6.6 kB) 2025-03-26 03:16:47.593051 | ubuntu-noble | #7 24.76 Collecting python-gilt==1.2.3 (from -r /tmp/requirements.txt (line 13)) 2025-03-26 03:16:47.593071 | ubuntu-noble | #7 24.77 Downloading python_gilt-1.2.3-py2.py3-none-any.whl.metadata (1.4 kB) 2025-03-26 03:16:47.668244 | ubuntu-noble | #7 25.00 Collecting ruamel.yaml==0.18.10 (from -r /tmp/requirements.txt (line 14)) 2025-03-26 03:16:47.800474 | ubuntu-noble | #7 25.01 Downloading ruamel.yaml-0.18.10-py3-none-any.whl.metadata (23 kB) 2025-03-26 03:16:47.905752 | ubuntu-noble | #7 25.05 Collecting yamllint==1.37.0 (from -r /tmp/requirements.txt (line 15)) 2025-03-26 03:16:47.905846 | ubuntu-noble | #7 25.07 Downloading yamllint-1.37.0-py3-none-any.whl.metadata (4.3 kB) 2025-03-26 03:16:47.905856 | ubuntu-noble | #7 25.13 Collecting ansible-core~=2.18.3 (from ansible==11.3.0->-r /tmp/requirements.txt (line 2)) 2025-03-26 03:16:47.905879 | ubuntu-noble | #7 25.15 Downloading ansible_core-2.18.4-py3-none-any.whl.metadata (7.7 kB) 2025-03-26 03:16:48.042045 | ubuntu-noble | #7 25.17 Collecting binaryornot>=0.4.4 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:48.042133 | ubuntu-noble | #7 25.19 Downloading binaryornot-0.4.4-py2.py3-none-any.whl.metadata (6.0 kB) 2025-03-26 03:16:48.042194 | ubuntu-noble | #7 25.22 Collecting Jinja2<4.0.0,>=2.7 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:48.042210 | ubuntu-noble | #7 25.24 Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB) 2025-03-26 03:16:48.042241 | ubuntu-noble | #7 25.29 Collecting python-slugify>=4.0.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:48.197139 | ubuntu-noble | #7 25.31 Downloading python_slugify-8.0.4-py2.py3-none-any.whl.metadata (8.5 kB) 2025-03-26 03:16:48.197250 | ubuntu-noble | #7 25.37 Collecting requests>=2.23.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:48.197270 | ubuntu-noble | #7 25.39 Downloading requests-2.32.3-py3-none-any.whl.metadata (4.6 kB) 2025-03-26 03:16:48.361534 | ubuntu-noble | #7 25.42 Collecting arrow (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:48.361613 | ubuntu-noble | #7 25.44 Downloading arrow-1.3.0-py3-none-any.whl.metadata (7.5 kB) 2025-03-26 03:16:48.361627 | ubuntu-noble | #7 25.53 Collecting rich (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:48.361648 | ubuntu-noble | #7 25.54 Downloading rich-13.9.4-py3-none-any.whl.metadata (18 kB) 2025-03-26 03:16:48.387708 | ubuntu-noble | #7 25.72 Collecting cffi>=1.12 (from cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-03-26 03:16:48.492361 | ubuntu-noble | #7 25.73 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (1.5 kB) 2025-03-26 03:16:48.603436 | ubuntu-noble | #7 25.77 Collecting iso8601>=0.1.11 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:48.603517 | ubuntu-noble | #7 25.78 Downloading iso8601-2.1.0-py3-none-any.whl.metadata (3.7 kB) 2025-03-26 03:16:48.603529 | ubuntu-noble | #7 25.83 Collecting oslo.i18n>=3.15.3 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:48.603548 | ubuntu-noble | #7 25.84 Downloading oslo.i18n-6.5.1-py3-none-any.whl.metadata (2.1 kB) 2025-03-26 03:16:48.739376 | ubuntu-noble | #7 25.87 Collecting netaddr>=0.10.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:48.739428 | ubuntu-noble | #7 25.89 Downloading netaddr-1.3.0-py3-none-any.whl.metadata (5.0 kB) 2025-03-26 03:16:48.739436 | ubuntu-noble | #7 25.94 Collecting debtcollector>=1.2.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:48.739451 | ubuntu-noble | #7 25.95 Downloading debtcollector-3.0.0-py3-none-any.whl.metadata (2.3 kB) 2025-03-26 03:16:48.917367 | ubuntu-noble | #7 26.02 Collecting pyparsing>=2.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:48.918106 | ubuntu-noble | #7 26.03 Downloading pyparsing-3.2.3-py3-none-any.whl.metadata (5.0 kB) 2025-03-26 03:16:48.918120 | ubuntu-noble | #7 26.07 Collecting packaging>=20.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:48.918135 | ubuntu-noble | #7 26.08 Downloading packaging-24.2-py3-none-any.whl.metadata (3.2 kB) 2025-03-26 03:16:49.082944 | ubuntu-noble | #7 26.12 Collecting tzdata>=2022.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:49.082997 | ubuntu-noble | #7 26.13 Downloading tzdata-2025.2-py2.py3-none-any.whl.metadata (1.4 kB) 2025-03-26 03:16:49.083004 | ubuntu-noble | #7 26.25 Collecting psutil>=3.2.2 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:49.083017 | ubuntu-noble | #7 26.26 Downloading psutil-7.0.0.tar.gz (497 kB) 2025-03-26 03:16:49.092333 | ubuntu-noble | #7 26.42 Installing build dependencies: started 2025-03-26 03:16:52.100014 | ubuntu-noble | #7 29.43 Installing build dependencies: finished with status 'done' 2025-03-26 03:16:52.253891 | ubuntu-noble | #7 29.44 Getting requirements to build wheel: started 2025-03-26 03:16:52.727677 | ubuntu-noble | #7 30.06 Getting requirements to build wheel: finished with status 'done' 2025-03-26 03:16:52.882073 | ubuntu-noble | #7 30.06 Preparing metadata (pyproject.toml): started 2025-03-26 03:16:53.281157 | ubuntu-noble | #7 30.61 Preparing metadata (pyproject.toml): finished with status 'done' 2025-03-26 03:16:53.471428 | ubuntu-noble | #7 30.66 Collecting pbr>=6.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:53.593805 | ubuntu-noble | #7 30.68 Downloading pbr-6.1.1-py2.py3-none-any.whl.metadata (3.4 kB) 2025-03-26 03:16:53.594052 | ubuntu-noble | #7 30.80 Collecting bcrypt>=3.2 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-03-26 03:16:53.594136 | ubuntu-noble | #7 30.82 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl.metadata (10 kB) 2025-03-26 03:16:53.707595 | ubuntu-noble | #7 30.88 Collecting pynacl>=1.5 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-03-26 03:16:53.707766 | ubuntu-noble | #7 30.89 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (8.6 kB) 2025-03-26 03:16:53.707781 | ubuntu-noble | #7 30.93 Collecting pyotp>=2.9.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-26 03:16:53.707883 | ubuntu-noble | #7 30.94 Downloading pyotp-2.9.0-py3-none-any.whl.metadata (9.8 kB) 2025-03-26 03:16:53.889280 | ubuntu-noble | #7 30.98 Collecting construct>=2.10.53 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-26 03:16:53.889438 | ubuntu-noble | #7 30.99 Downloading construct-2.10.70-py3-none-any.whl.metadata (4.2 kB) 2025-03-26 03:16:53.889450 | ubuntu-noble | #7 31.03 Collecting argon2_cffi>=18.1.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-26 03:16:53.889459 | ubuntu-noble | #7 31.04 Downloading argon2_cffi-23.1.0-py3-none-any.whl.metadata (5.2 kB) 2025-03-26 03:16:53.889482 | ubuntu-noble | #7 31.22 Collecting pycryptodomex>=3.6.2 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-26 03:16:54.056734 | ubuntu-noble | #7 31.24 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB) 2025-03-26 03:16:54.270613 | ubuntu-noble | #7 31.60 Collecting lxml (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-26 03:16:54.378817 | ubuntu-noble | #7 31.62 Downloading lxml-5.3.1-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (3.7 kB) 2025-03-26 03:16:54.532755 | ubuntu-noble | #7 31.66 Collecting colorama (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-03-26 03:16:54.532925 | ubuntu-noble | #7 31.68 Downloading colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) 2025-03-26 03:16:54.532947 | ubuntu-noble | #7 31.71 Collecting fasteners (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-03-26 03:16:54.533024 | ubuntu-noble | #7 31.73 Downloading fasteners-0.19-py3-none-any.whl.metadata (4.9 kB) 2025-03-26 03:16:54.661210 | ubuntu-noble | #7 31.77 Collecting sh (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-03-26 03:16:54.661382 | ubuntu-noble | #7 31.78 Downloading sh-2.2.2-py3-none-any.whl.metadata (3.7 kB) 2025-03-26 03:16:54.661408 | ubuntu-noble | #7 31.86 Collecting ruamel.yaml.clib>=0.2.7 (from ruamel.yaml==0.18.10->-r /tmp/requirements.txt (line 14)) 2025-03-26 03:16:54.661573 | ubuntu-noble | #7 31.88 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (2.7 kB) 2025-03-26 03:16:54.763559 | ubuntu-noble | #7 31.92 Collecting pathspec>=0.5.3 (from yamllint==1.37.0->-r /tmp/requirements.txt (line 15)) 2025-03-26 03:16:54.763837 | ubuntu-noble | #7 31.93 Downloading pathspec-0.12.1-py3-none-any.whl.metadata (21 kB) 2025-03-26 03:16:54.763862 | ubuntu-noble | #7 31.99 Collecting resolvelib<1.1.0,>=0.5.3 (from ansible-core~=2.18.3->ansible==11.3.0->-r /tmp/requirements.txt (line 2)) 2025-03-26 03:16:54.763906 | ubuntu-noble | #7 32.01 Downloading resolvelib-1.0.1-py2.py3-none-any.whl.metadata (4.0 kB) 2025-03-26 03:16:54.965412 | ubuntu-noble | #7 32.04 Collecting argon2-cffi-bindings (from argon2_cffi>=18.1.0->pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-03-26 03:16:54.965526 | ubuntu-noble | #7 32.05 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (6.7 kB) 2025-03-26 03:16:54.965545 | ubuntu-noble | #7 32.09 Collecting chardet>=3.0.2 (from binaryornot>=0.4.4->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:54.965575 | ubuntu-noble | #7 32.11 Downloading chardet-5.2.0-py3-none-any.whl.metadata (3.4 kB) 2025-03-26 03:16:54.980943 | ubuntu-noble | #7 32.13 Collecting pycparser (from cffi>=1.12->cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-03-26 03:16:54.981094 | ubuntu-noble | #7 32.15 Downloading pycparser-2.22-py3-none-any.whl.metadata (943 bytes) 2025-03-26 03:16:54.981117 | ubuntu-noble | #7 32.31 Collecting wrapt>=1.7.0 (from debtcollector>=1.2.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:55.102990 | ubuntu-noble | #7 32.33 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (6.4 kB) 2025-03-26 03:16:55.267459 | ubuntu-noble | #7 32.44 Collecting MarkupSafe>=2.0 (from Jinja2<4.0.0,>=2.7->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:55.267626 | ubuntu-noble | #7 32.45 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (4.0 kB) 2025-03-26 03:16:55.342385 | ubuntu-noble | #7 32.67 Collecting setuptools (from pbr>=6.1.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-03-26 03:16:55.452908 | ubuntu-noble | #7 32.69 Downloading setuptools-78.1.0-py3-none-any.whl.metadata (6.6 kB) 2025-03-26 03:16:55.597155 | ubuntu-noble | #7 32.77 Collecting text-unidecode>=1.3 (from python-slugify>=4.0.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:55.597284 | ubuntu-noble | #7 32.78 Downloading text_unidecode-1.3-py2.py3-none-any.whl.metadata (2.4 kB) 2025-03-26 03:16:55.597333 | ubuntu-noble | #7 32.93 Collecting charset-normalizer<4,>=2 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:55.716721 | ubuntu-noble | #7 32.94 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (35 kB) 2025-03-26 03:16:55.831065 | ubuntu-noble | #7 32.98 Collecting idna<4,>=2.5 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:55.831194 | ubuntu-noble | #7 32.99 Downloading idna-3.10-py3-none-any.whl.metadata (10 kB) 2025-03-26 03:16:55.831212 | ubuntu-noble | #7 33.05 Collecting urllib3<3,>=1.21.1 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:55.831238 | ubuntu-noble | #7 33.06 Downloading urllib3-2.3.0-py3-none-any.whl.metadata (6.5 kB) 2025-03-26 03:16:56.038758 | ubuntu-noble | #7 33.10 Collecting certifi>=2017.4.17 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:56.038926 | ubuntu-noble | #7 33.12 Downloading certifi-2025.1.31-py3-none-any.whl.metadata (2.5 kB) 2025-03-26 03:16:56.038943 | ubuntu-noble | #7 33.16 Collecting python-dateutil>=2.7.0 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:56.038969 | ubuntu-noble | #7 33.18 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl.metadata (8.4 kB) 2025-03-26 03:16:56.161757 | ubuntu-noble | #7 33.24 Collecting types-python-dateutil>=2.8.10 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:56.161902 | ubuntu-noble | #7 33.25 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl.metadata (2.1 kB) 2025-03-26 03:16:56.161930 | ubuntu-noble | #7 33.37 Collecting markdown-it-py>=2.2.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:56.161969 | ubuntu-noble | #7 33.39 Downloading markdown_it_py-3.0.0-py3-none-any.whl.metadata (6.9 kB) 2025-03-26 03:16:56.334342 | ubuntu-noble | #7 33.43 Collecting pygments<3.0.0,>=2.13.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:56.334530 | ubuntu-noble | #7 33.45 Downloading pygments-2.19.1-py3-none-any.whl.metadata (2.5 kB) 2025-03-26 03:16:56.334542 | ubuntu-noble | #7 33.49 Collecting mdurl~=0.1 (from markdown-it-py>=2.2.0->rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:56.334715 | ubuntu-noble | #7 33.51 Downloading mdurl-0.1.2-py3-none-any.whl.metadata (1.6 kB) 2025-03-26 03:16:56.541498 | ubuntu-noble | #7 33.56 Collecting six>=1.5 (from python-dateutil>=2.7.0->arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-03-26 03:16:56.541644 | ubuntu-noble | #7 33.57 Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB) 2025-03-26 03:16:56.541666 | ubuntu-noble | #7 33.67 Downloading PyYAML-6.0.2-cp312-cp312-musllinux_1_1_x86_64.whl (756 kB) 2025-03-26 03:16:56.541701 | ubuntu-noble | #7 33.70 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 756.6/756.6 kB 264.9 MB/s eta 0:00:00 2025-03-26 03:16:57.971480 | ubuntu-noble | #7 33.72 Downloading ansible-11.3.0-py3-none-any.whl (54.2 MB) 2025-03-26 03:16:58.140996 | ubuntu-noble | #7 35.30 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.2/54.2 MB 34.6 MB/s eta 0:00:00 2025-03-26 03:16:58.252002 | ubuntu-noble | #7 35.32 Downloading click-8.1.8-py3-none-any.whl (98 kB) 2025-03-26 03:16:58.252142 | ubuntu-noble | #7 35.34 Downloading cookiecutter-2.6.0-py3-none-any.whl (39 kB) 2025-03-26 03:16:58.252161 | ubuntu-noble | #7 35.35 Downloading cryptography-44.0.2-cp39-abi3-musllinux_1_2_x86_64.whl (4.3 MB) 2025-03-26 03:16:58.252221 | ubuntu-noble | #7 35.47 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.3/4.3 MB 37.4 MB/s eta 0:00:00 2025-03-26 03:16:58.358677 | ubuntu-noble | #7 35.49 Downloading loguru-0.7.3-py3-none-any.whl (61 kB) 2025-03-26 03:16:58.358768 | ubuntu-noble | #7 35.51 Downloading oslo.utils-8.2.0-py3-none-any.whl (134 kB) 2025-03-26 03:16:58.358793 | ubuntu-noble | #7 35.53 Downloading paramiko-3.5.1-py3-none-any.whl (227 kB) 2025-03-26 03:16:58.358814 | ubuntu-noble | #7 35.55 Downloading passlib-1.7.4-py2.py3-none-any.whl (525 kB) 2025-03-26 03:16:58.358834 | ubuntu-noble | #7 35.57 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 525.6/525.6 kB 24.9 MB/s eta 0:00:00 2025-03-26 03:16:58.358853 | ubuntu-noble | #7 35.58 Downloading pycryptodome-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-03-26 03:16:58.359055 | ubuntu-noble | #7 35.64 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 38.2 MB/s eta 0:00:00 2025-03-26 03:16:58.466682 | ubuntu-noble | #7 35.66 Downloading pykeepass-4.1.1.post1-py3-none-any.whl (55 kB) 2025-03-26 03:16:58.466791 | ubuntu-noble | #7 35.68 Downloading python_gilt-1.2.3-py2.py3-none-any.whl (22 kB) 2025-03-26 03:16:58.466808 | ubuntu-noble | #7 35.69 Downloading ruamel.yaml-0.18.10-py3-none-any.whl (117 kB) 2025-03-26 03:16:58.466851 | ubuntu-noble | #7 35.71 Downloading yamllint-1.37.0-py3-none-any.whl (68 kB) 2025-03-26 03:16:58.580977 | ubuntu-noble | #7 35.73 Downloading ansible_core-2.18.4-py3-none-any.whl (2.2 MB) 2025-03-26 03:16:58.581057 | ubuntu-noble | #7 35.78 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.2/2.2 MB 39.6 MB/s eta 0:00:00 2025-03-26 03:16:58.581080 | ubuntu-noble | #7 35.80 Downloading argon2_cffi-23.1.0-py3-none-any.whl (15 kB) 2025-03-26 03:16:58.581112 | ubuntu-noble | #7 35.82 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl (363 kB) 2025-03-26 03:16:58.693219 | ubuntu-noble | #7 35.84 Downloading binaryornot-0.4.4-py2.py3-none-any.whl (9.0 kB) 2025-03-26 03:16:58.693423 | ubuntu-noble | #7 35.86 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl (488 kB) 2025-03-26 03:16:58.693451 | ubuntu-noble | #7 35.88 Downloading construct-2.10.70-py3-none-any.whl (63 kB) 2025-03-26 03:16:58.693468 | ubuntu-noble | #7 35.90 Downloading debtcollector-3.0.0-py3-none-any.whl (23 kB) 2025-03-26 03:16:58.693496 | ubuntu-noble | #7 35.91 Downloading iso8601-2.1.0-py3-none-any.whl (7.5 kB) 2025-03-26 03:16:58.693524 | ubuntu-noble | #7 35.93 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) 2025-03-26 03:16:58.815681 | ubuntu-noble | #7 35.95 Downloading netaddr-1.3.0-py3-none-any.whl (2.3 MB) 2025-03-26 03:16:58.815745 | ubuntu-noble | #7 36.01 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 37.5 MB/s eta 0:00:00 2025-03-26 03:16:58.815753 | ubuntu-noble | #7 36.03 Downloading oslo.i18n-6.5.1-py3-none-any.whl (46 kB) 2025-03-26 03:16:58.815764 | ubuntu-noble | #7 36.04 Downloading packaging-24.2-py3-none-any.whl (65 kB) 2025-03-26 03:16:58.932577 | ubuntu-noble | #7 36.05 Downloading pathspec-0.12.1-py3-none-any.whl (31 kB) 2025-03-26 03:16:58.932819 | ubuntu-noble | #7 36.07 Downloading pbr-6.1.1-py2.py3-none-any.whl (108 kB) 2025-03-26 03:16:58.932844 | ubuntu-noble | #7 36.09 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-03-26 03:16:58.932878 | ubuntu-noble | #7 36.15 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 41.2 MB/s eta 0:00:00 2025-03-26 03:16:59.042929 | ubuntu-noble | #7 36.17 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl (1.1 MB) 2025-03-26 03:16:59.043128 | ubuntu-noble | #7 36.19 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 40.8 MB/s eta 0:00:00 2025-03-26 03:16:59.043154 | ubuntu-noble | #7 36.21 Downloading pyotp-2.9.0-py3-none-any.whl (13 kB) 2025-03-26 03:16:59.043172 | ubuntu-noble | #7 36.23 Downloading pyparsing-3.2.3-py3-none-any.whl (111 kB) 2025-03-26 03:16:59.043190 | ubuntu-noble | #7 36.25 Downloading python_slugify-8.0.4-py2.py3-none-any.whl (10 kB) 2025-03-26 03:16:59.043210 | ubuntu-noble | #7 36.26 Downloading requests-2.32.3-py3-none-any.whl (64 kB) 2025-03-26 03:16:59.043258 | ubuntu-noble | #7 36.28 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl (745 kB) 2025-03-26 03:16:59.209397 | ubuntu-noble | #7 36.30 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 745.8/745.8 kB 35.5 MB/s eta 0:00:00 2025-03-26 03:16:59.209483 | ubuntu-noble | #7 36.32 Downloading tzdata-2025.2-py2.py3-none-any.whl (347 kB) 2025-03-26 03:16:59.209501 | ubuntu-noble | #7 36.34 Downloading arrow-1.3.0-py3-none-any.whl (66 kB) 2025-03-26 03:16:59.209515 | ubuntu-noble | #7 36.36 Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB) 2025-03-26 03:16:59.209528 | ubuntu-noble | #7 36.38 Downloading fasteners-0.19-py3-none-any.whl (18 kB) 2025-03-26 03:16:59.209552 | ubuntu-noble | #7 36.39 Downloading lxml-5.3.1-cp312-cp312-musllinux_1_2_x86_64.whl (5.1 MB) 2025-03-26 03:16:59.371045 | ubuntu-noble | #7 36.59 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.1/5.1 MB 25.6 MB/s eta 0:00:00 2025-03-26 03:16:59.487942 | ubuntu-noble | #7 36.60 Downloading rich-13.9.4-py3-none-any.whl (242 kB) 2025-03-26 03:16:59.488026 | ubuntu-noble | #7 36.62 Downloading sh-2.2.2-py3-none-any.whl (38 kB) 2025-03-26 03:16:59.488048 | ubuntu-noble | #7 36.63 Downloading certifi-2025.1.31-py3-none-any.whl (166 kB) 2025-03-26 03:16:59.488058 | ubuntu-noble | #7 36.65 Downloading chardet-5.2.0-py3-none-any.whl (199 kB) 2025-03-26 03:16:59.488067 | ubuntu-noble | #7 36.67 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl (146 kB) 2025-03-26 03:16:59.488084 | ubuntu-noble | #7 36.69 Downloading idna-3.10-py3-none-any.whl (70 kB) 2025-03-26 03:16:59.488099 | ubuntu-noble | #7 36.70 Downloading markdown_it_py-3.0.0-py3-none-any.whl (87 kB) 2025-03-26 03:16:59.488126 | ubuntu-noble | #7 36.72 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl (23 kB) 2025-03-26 03:16:59.590923 | ubuntu-noble | #7 36.74 Downloading pygments-2.19.1-py3-none-any.whl (1.2 MB) 2025-03-26 03:16:59.591033 | ubuntu-noble | #7 36.77 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 39.9 MB/s eta 0:00:00 2025-03-26 03:16:59.591065 | ubuntu-noble | #7 36.78 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl (229 kB) 2025-03-26 03:16:59.591090 | ubuntu-noble | #7 36.80 Downloading resolvelib-1.0.1-py2.py3-none-any.whl (17 kB) 2025-03-26 03:16:59.591113 | ubuntu-noble | #7 36.82 Downloading text_unidecode-1.3-py2.py3-none-any.whl (78 kB) 2025-03-26 03:16:59.591153 | ubuntu-noble | #7 36.84 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl (14 kB) 2025-03-26 03:16:59.800793 | ubuntu-noble | #7 36.85 Downloading urllib3-2.3.0-py3-none-any.whl (128 kB) 2025-03-26 03:16:59.800886 | ubuntu-noble | #7 36.87 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl (87 kB) 2025-03-26 03:16:59.800905 | ubuntu-noble | #7 36.89 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl (88 kB) 2025-03-26 03:16:59.800939 | ubuntu-noble | #7 36.90 Downloading pycparser-2.22-py3-none-any.whl (117 kB) 2025-03-26 03:16:59.800955 | ubuntu-noble | #7 36.92 Downloading setuptools-78.1.0-py3-none-any.whl (1.3 MB) 2025-03-26 03:16:59.800983 | ubuntu-noble | #7 36.96 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 37.8 MB/s eta 0:00:00 2025-03-26 03:16:59.801159 | ubuntu-noble | #7 36.97 Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) 2025-03-26 03:17:00.145500 | ubuntu-noble | #7 36.98 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB) 2025-03-26 03:17:00.145560 | ubuntu-noble | #7 37.48 Building wheels for collected packages: pwgen, psutil 2025-03-26 03:17:00.297089 | ubuntu-noble | #7 37.48 Building wheel for pwgen (pyproject.toml): started 2025-03-26 03:17:00.489903 | ubuntu-noble | #7 37.82 Building wheel for pwgen (pyproject.toml): finished with status 'done' 2025-03-26 03:17:00.644879 | ubuntu-noble | #7 37.82 Created wheel for pwgen: filename=pwgen-0.8.2.post0-py3-none-any.whl size=3798 sha256=c7804da8802adfa3f1730c25156d47a5264c1f7a5aafe2c65ecc127dd3cf74ce 2025-03-26 03:17:03.361197 | ubuntu-noble | #7 37.82 Stored in directory: /tmp/pip-ephem-wheel-cache-kgnu640c/wheels/8e/56/bf/a88cd4e5b84752858d6db0c914d636211570e8a1e73b53b5dd 2025-03-26 03:17:03.361255 | ubuntu-noble | #7 37.83 Building wheel for psutil (pyproject.toml): started 2025-03-26 03:17:03.361296 | ubuntu-noble | #7 40.69 Building wheel for psutil (pyproject.toml): finished with status 'done' 2025-03-26 03:17:03.526520 | ubuntu-noble | #7 40.70 Created wheel for psutil: filename=psutil-7.0.0-cp36-abi3-linux_x86_64.whl size=277229 sha256=06e82dd56159a0363ba28a9aedd24e23cdadac58eaadac82e6c1bfa8ab05d029 2025-03-26 03:17:03.883270 | ubuntu-noble | #7 40.70 Stored in directory: /tmp/pip-ephem-wheel-cache-kgnu640c/wheels/0c/58/48/ccefe23b905f1dd76f8444f328ff2cfb1d4920a081f9d5d03d 2025-03-26 03:17:03.883426 | ubuntu-noble | #7 40.71 Successfully built pwgen psutil 2025-03-26 03:17:03.883483 | ubuntu-noble | #7 41.22 Installing collected packages: text-unidecode, resolvelib, pwgen, passlib, wrapt, urllib3, tzdata, types-python-dateutil, six, sh, setuptools, ruamel.yaml.clib, PyYAML, python-slugify, pyparsing, pyotp, pygments, pycryptodomex, pycryptodome, pycparser, psutil, pathspec, packaging, netaddr, mdurl, MarkupSafe, lxml, loguru, iso8601, idna, fasteners, construct, colorama, click, charset-normalizer, chardet, certifi, bcrypt, yamllint, ruamel.yaml, requests, python-gilt, python-dateutil, pbr, markdown-it-py, Jinja2, debtcollector, cffi, binaryornot, rich, pynacl, oslo.i18n, cryptography, arrow, argon2-cffi-bindings, paramiko, oslo.utils, cookiecutter, argon2_cffi, ansible-core, pykeepass, ansible 2025-03-26 03:18:01.100767 | ubuntu-noble | #7 98.43 Successfully installed Jinja2-3.1.6 MarkupSafe-3.0.2 PyYAML-6.0.2 ansible-11.3.0 ansible-core-2.18.4 argon2-cffi-bindings-21.2.0 argon2_cffi-23.1.0 arrow-1.3.0 bcrypt-4.3.0 binaryornot-0.4.4 certifi-2025.1.31 cffi-1.17.1 chardet-5.2.0 charset-normalizer-3.4.1 click-8.1.8 colorama-0.4.6 construct-2.10.70 cookiecutter-2.6.0 cryptography-44.0.2 debtcollector-3.0.0 fasteners-0.19 idna-3.10 iso8601-2.1.0 loguru-0.7.3 lxml-5.3.1 markdown-it-py-3.0.0 mdurl-0.1.2 netaddr-1.3.0 oslo.i18n-6.5.1 oslo.utils-8.2.0 packaging-24.2 paramiko-3.5.1 passlib-1.7.4 pathspec-0.12.1 pbr-6.1.1 psutil-7.0.0 pwgen-0.8.2.post0 pycparser-2.22 pycryptodome-3.22.0 pycryptodomex-3.22.0 pygments-2.19.1 pykeepass-4.1.1.post1 pynacl-1.5.0 pyotp-2.9.0 pyparsing-3.2.3 python-dateutil-2.9.0.post0 python-gilt-1.2.3 python-slugify-8.0.4 requests-2.32.3 resolvelib-1.0.1 rich-13.9.4 ruamel.yaml-0.18.10 ruamel.yaml.clib-0.2.12 setuptools-78.1.0 sh-2.2.2 six-1.17.0 text-unidecode-1.3 types-python-dateutil-2.9.0.20241206 tzdata-2025.2 urllib3-2.3.0 wrapt-1.17.2 yamllint-1.37.0 2025-03-26 03:18:01.252015 | ubuntu-noble | #7 98.43 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning. 2025-03-26 03:18:01.758682 | ubuntu-noble | #7 99.09 (1/36) Purging .build-deps (20250326.031625) 2025-03-26 03:18:01.870566 | ubuntu-noble | #7 99.09 (2/36) Purging build-base (0.5-r3) 2025-03-26 03:18:01.870656 | ubuntu-noble | #7 99.09 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/main: No such file or directory 2025-03-26 03:18:01.977752 | ubuntu-noble | #7 99.09 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/community: No such file or directory 2025-03-26 03:18:01.977821 | ubuntu-noble | #7 99.09 (3/36) Purging file (5.46-r2) 2025-03-26 03:18:01.977830 | ubuntu-noble | #7 99.09 (4/36) Purging g++ (14.2.0-r4) 2025-03-26 03:18:01.977836 | ubuntu-noble | #7 99.10 (5/36) Purging libstdc++-dev (14.2.0-r4) 2025-03-26 03:18:01.977842 | ubuntu-noble | #7 99.13 (6/36) Purging make (4.4.1-r2) 2025-03-26 03:18:01.977848 | ubuntu-noble | #7 99.13 (7/36) Purging fortify-headers (1.1-r5) 2025-03-26 03:18:01.977854 | ubuntu-noble | #7 99.13 (8/36) Purging patch (2.7.6-r10) 2025-03-26 03:18:01.977860 | ubuntu-noble | #7 99.13 (9/36) Purging cargo (1.83.0-r0) 2025-03-26 03:18:01.977865 | ubuntu-noble | #7 99.14 (10/36) Purging libffi-dev (3.4.7-r0) 2025-03-26 03:18:01.977871 | ubuntu-noble | #7 99.14 (11/36) Purging linux-headers (6.6-r1) 2025-03-26 03:18:01.977877 | ubuntu-noble | #7 99.16 (12/36) Purging openssl-dev (3.3.3-r0) 2025-03-26 03:18:01.977883 | ubuntu-noble | #7 99.16 (13/36) Purging python3-dev (3.12.9-r0) 2025-03-26 03:18:01.977888 | ubuntu-noble | #7 99.19 (14/36) Purging python3-pyc (3.12.9-r0) 2025-03-26 03:18:01.977913 | ubuntu-noble | #7 99.19 (15/36) Purging python3-pycache-pyc0 (3.12.9-r0) 2025-03-26 03:18:01.977920 | ubuntu-noble | #7 99.20 (16/36) Purging pyc (3.12.9-r0) 2025-03-26 03:18:01.977924 | ubuntu-noble | #7 99.20 (17/36) Purging python3 (3.12.9-r0) 2025-03-26 03:18:01.977939 | ubuntu-noble | #7 99.23 (18/36) Purging rust (1.83.0-r0) 2025-03-26 03:18:02.180834 | ubuntu-noble | #7 99.26 (19/36) Purging gcc (14.2.0-r4) 2025-03-26 03:18:02.180939 | ubuntu-noble | #7 99.31 (20/36) Purging binutils (2.43.1-r2) 2025-03-26 03:18:02.180961 | ubuntu-noble | #7 99.32 (21/36) Purging libatomic (14.2.0-r4) 2025-03-26 03:18:02.396784 | ubuntu-noble | #7 99.32 (22/36) Purging libgomp (14.2.0-r4) 2025-03-26 03:18:02.396895 | ubuntu-noble | #7 99.32 (23/36) Purging musl-dev (1.2.5-r9) 2025-03-26 03:18:02.396913 | ubuntu-noble | #7 99.32 (24/36) Purging isl26 (0.26-r1) 2025-03-26 03:18:02.396923 | ubuntu-noble | #7 99.33 (25/36) Purging jansson (2.14-r4) 2025-03-26 03:18:02.396933 | ubuntu-noble | #7 99.33 (26/36) Purging libmagic (5.46-r2) 2025-03-26 03:18:02.396942 | ubuntu-noble | #7 99.33 (27/36) Purging llvm19-libs (19.1.4-r0) 2025-03-26 03:18:02.396952 | ubuntu-noble | #7 99.35 (28/36) Purging mpc1 (1.3.1-r1) 2025-03-26 03:18:02.396961 | ubuntu-noble | #7 99.35 (29/36) Purging mpdecimal (4.0.0-r0) 2025-03-26 03:18:02.396970 | ubuntu-noble | #7 99.35 (30/36) Purging mpfr4 (4.2.1-r0) 2025-03-26 03:18:02.396979 | ubuntu-noble | #7 99.35 (31/36) Purging pkgconf (2.3.0-r0) 2025-03-26 03:18:02.396988 | ubuntu-noble | #7 99.35 (32/36) Purging scudo-malloc (19.1.4-r0) 2025-03-26 03:18:02.396998 | ubuntu-noble | #7 99.35 (33/36) Purging gmp (6.3.0-r2) 2025-03-26 03:18:02.397007 | ubuntu-noble | #7 99.35 (34/36) Purging libstdc++ (14.2.0-r4) 2025-03-26 03:18:02.397016 | ubuntu-noble | #7 99.36 (35/36) Purging libgcc (14.2.0-r4) 2025-03-26 03:18:02.397025 | ubuntu-noble | #7 99.36 (36/36) Purging libxml2 (2.13.4-r5) 2025-03-26 03:18:02.397034 | ubuntu-noble | #7 99.36 Executing busybox-1.37.0-r12.trigger 2025-03-26 03:18:02.397043 | ubuntu-noble | #7 99.36 OK: 26 MiB in 52 packages 2025-03-26 03:18:02.397064 | ubuntu-noble | #7 DONE 99.7s 2025-03-26 03:18:02.552168 | ubuntu-noble | 2025-03-26 03:18:02.620366 | ubuntu-noble | #8 [4/5] COPY . /data 2025-03-26 03:18:02.620478 | ubuntu-noble | #8 DONE 0.2s 2025-03-26 03:18:02.858274 | ubuntu-noble | 2025-03-26 03:18:10.930848 | ubuntu-noble | #9 [5/5] WORKDIR /data 2025-03-26 03:18:10.930903 | ubuntu-noble | #9 DONE 0.1s 2025-03-26 03:18:10.930915 | ubuntu-noble | 2025-03-26 03:18:10.930927 | ubuntu-noble | #10 exporting to image 2025-03-26 03:18:10.930936 | ubuntu-noble | #10 exporting layers 2025-03-26 03:18:10.930954 | ubuntu-noble | #10 exporting layers 8.2s done 2025-03-26 03:18:11.123656 | ubuntu-noble | #10 writing image sha256:bf8a87d0f70bd087150818c523ca4aced0eeacfa325be61943c42093be2f7dba done 2025-03-26 03:18:11.130819 | ubuntu-noble | #10 naming to docker.io/library/8085c68 done 2025-03-26 03:18:11.130902 | ubuntu-noble | #10 DONE 8.3s 2025-03-26 03:18:11.200881 | ubuntu-noble | changed 2025-03-26 03:18:11.209236 | 2025-03-26 03:18:11.209399 | TASK [Run push script] 2025-03-26 03:18:11.556350 | ubuntu-noble | ++ git rev-parse --short HEAD 2025-03-26 03:18:11.557339 | ubuntu-noble | + revision=8085c68 2025-03-26 03:18:11.590336 | ubuntu-noble | + [[ -n osism.harbor.regio.digital ]] 2025-03-26 03:18:11.590379 | ubuntu-noble | + repository=osism.harbor.regio.digital/osism/cookiecutter 2025-03-26 03:18:11.590390 | ubuntu-noble | + docker tag 8085c68 osism.harbor.regio.digital/osism/cookiecutter:latest 2025-03-26 03:18:11.590405 | ubuntu-noble | + docker push osism.harbor.regio.digital/osism/cookiecutter:latest 2025-03-26 03:18:11.621351 | ubuntu-noble | The push refers to repository [osism.harbor.regio.digital/osism/cookiecutter] 2025-03-26 03:18:11.651656 | ubuntu-noble | 5f70bf18a086: Preparing 2025-03-26 03:18:11.651698 | ubuntu-noble | fafc8f8aed53: Preparing 2025-03-26 03:18:11.651706 | ubuntu-noble | 178b2a36df7b: Preparing 2025-03-26 03:18:11.651713 | ubuntu-noble | 09b7f8679839: Preparing 2025-03-26 03:18:11.651728 | ubuntu-noble | 489dcb666f26: Preparing 2025-03-26 03:18:11.652335 | ubuntu-noble | 95e6092fd8de: Preparing 2025-03-26 03:18:11.652347 | ubuntu-noble | 3553588814e5: Preparing 2025-03-26 03:18:11.652354 | ubuntu-noble | 08000c18d16d: Preparing 2025-03-26 03:18:11.652361 | ubuntu-noble | 95e6092fd8de: Waiting 2025-03-26 03:18:11.652368 | ubuntu-noble | 3553588814e5: Waiting 2025-03-26 03:18:11.652380 | ubuntu-noble | 08000c18d16d: Waiting 2025-03-26 03:18:12.012534 | ubuntu-noble | 489dcb666f26: Layer already exists 2025-03-26 03:18:12.457170 | ubuntu-noble | 95e6092fd8de: Layer already exists 2025-03-26 03:18:12.755869 | ubuntu-noble | 3553588814e5: Layer already exists 2025-03-26 03:18:13.166476 | ubuntu-noble | 08000c18d16d: Layer already exists 2025-03-26 03:18:17.404721 | ubuntu-noble | 09b7f8679839: Pushed 2025-03-26 03:18:17.587337 | ubuntu-noble | 5f70bf18a086: Pushed 2025-03-26 03:18:17.963105 | ubuntu-noble | fafc8f8aed53: Pushed 2025-03-26 03:18:51.980734 | ubuntu-noble | 178b2a36df7b: Pushed 2025-03-26 03:18:57.192294 | ubuntu-noble | latest: digest: sha256:bf3d7c7335362a86e168a186c080d2daa8dc254bf31d241612d8edc7fc700f2d size: 1993 2025-03-26 03:18:57.308854 | ubuntu-noble | changed 2025-03-26 03:18:57.335453 | 2025-03-26 03:18:57.335526 | PLAY RECAP 2025-03-26 03:18:57.335578 | ubuntu-noble | ok: 3 changed: 3 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-03-26 03:18:57.335605 | 2025-03-26 03:18:57.420763 | RUN END RESULT_NORMAL: [untrusted : github.com/osism/cfg-cookiecutter/playbooks/build.yml@main] 2025-03-26 03:18:57.423875 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-03-26 03:18:58.135415 | 2025-03-26 03:18:58.135539 | PLAY [Base post] 2025-03-26 03:18:58.162113 | 2025-03-26 03:18:58.162307 | TASK [remove-build-sshkey : Remove the build SSH key from all nodes] 2025-03-26 03:18:58.933955 | ubuntu-noble | changed 2025-03-26 03:18:58.965673 | 2025-03-26 03:18:58.965770 | PLAY RECAP 2025-03-26 03:18:58.965829 | ubuntu-noble | ok: 1 changed: 1 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-03-26 03:18:58.965890 | 2025-03-26 03:18:59.049574 | POST-RUN END RESULT_NORMAL: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-03-26 03:18:59.053142 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post-logs.yaml@main] 2025-03-26 03:19:00.051158 | 2025-03-26 03:19:00.051284 | PLAY [Base post-logs] 2025-03-26 03:19:00.084115 | 2025-03-26 03:19:00.084233 | TASK [generate-zuul-manifest : Generate Zuul manifest] 2025-03-26 03:19:00.638239 | localhost | changed 2025-03-26 03:19:00.641115 | 2025-03-26 03:19:00.641204 | TASK [generate-zuul-manifest : Return Zuul manifest URL to Zuul] 2025-03-26 03:19:00.687313 | localhost | ok 2025-03-26 03:19:00.691738 | 2025-03-26 03:19:00.691813 | TASK [Set zuul-log-path fact] 2025-03-26 03:19:00.707314 | localhost | ok 2025-03-26 03:19:00.715409 | 2025-03-26 03:19:00.715488 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-03-26 03:19:00.741575 | localhost | ok 2025-03-26 03:19:00.746071 | 2025-03-26 03:19:00.746143 | TASK [upload-logs : Create log directories] 2025-03-26 03:19:01.434666 | localhost | changed 2025-03-26 03:19:01.441817 | 2025-03-26 03:19:01.441922 | TASK [upload-logs : Ensure logs are readable before uploading] 2025-03-26 03:19:02.208375 | localhost -> localhost | ok: Runtime: 0:00:00.006791 2025-03-26 03:19:02.213821 | 2025-03-26 03:19:02.213928 | TASK [upload-logs : Upload logs to log server] 2025-03-26 03:19:02.791755 | localhost | Output suppressed because no_log was given 2025-03-26 03:19:02.794806 | 2025-03-26 03:19:02.794902 | LOOP [upload-logs : Compress console log and json output] 2025-03-26 03:19:02.852171 | localhost | skipping: Conditional result was False 2025-03-26 03:19:02.870032 | localhost | skipping: Conditional result was False 2025-03-26 03:19:02.874253 | 2025-03-26 03:19:02.874359 | LOOP [upload-logs : Upload compressed console log and json output] 2025-03-26 03:19:02.931351 | localhost | skipping: Conditional result was False 2025-03-26 03:19:02.931597 | 2025-03-26 03:19:02.945557 | localhost | skipping: Conditional result was False 2025-03-26 03:19:02.953756 | 2025-03-26 03:19:02.953851 | LOOP [upload-logs : Upload console log and json output]