2025-04-30 03:02:49.806300 | Job console starting... 2025-04-30 03:02:49.833052 | Updating repositories 2025-04-30 03:02:49.896961 | Preparing job workspace 2025-04-30 03:02:51.949727 | Running Ansible setup... 2025-04-30 03:03:01.055569 | PRE-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/pre.yaml@main] 2025-04-30 03:03:02.397818 | 2025-04-30 03:03:02.398153 | PLAY [Base pre] 2025-04-30 03:03:02.437911 | 2025-04-30 03:03:02.438038 | TASK [Setup log path fact] 2025-04-30 03:03:02.477762 | ubuntu-noble | ok 2025-04-30 03:03:02.497595 | 2025-04-30 03:03:02.497704 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-04-30 03:03:02.527049 | ubuntu-noble | ok 2025-04-30 03:03:02.553259 | 2025-04-30 03:03:02.553358 | TASK [emit-job-header : Print job information] 2025-04-30 03:03:02.623548 | # Job Information 2025-04-30 03:03:02.623711 | Ansible Version: 2.15.3 2025-04-30 03:03:02.623739 | Job: container-image-cfg-cookiecutter-push 2025-04-30 03:03:02.623763 | Pipeline: periodic-daily 2025-04-30 03:03:02.623791 | Executor: 7d211f194f6a 2025-04-30 03:03:02.623808 | Triggered by: https://github.com/osism/cfg-cookiecutter 2025-04-30 03:03:02.623824 | Event ID: 88001b0f882a447ca781c1e8a7b40759 2025-04-30 03:03:02.648994 | 2025-04-30 03:03:02.649115 | LOOP [emit-job-header : Print node information] 2025-04-30 03:03:02.844401 | ubuntu-noble | ok: 2025-04-30 03:03:02.844553 | ubuntu-noble | # Node Information 2025-04-30 03:03:02.844581 | ubuntu-noble | Inventory Hostname: ubuntu-noble 2025-04-30 03:03:02.844601 | ubuntu-noble | Hostname: ubuntu 2025-04-30 03:03:02.844618 | ubuntu-noble | Username: zuul 2025-04-30 03:03:02.844635 | ubuntu-noble | Distro: Ubuntu 24.04 2025-04-30 03:03:02.844655 | ubuntu-noble | Provider: regiocloud-a 2025-04-30 03:03:02.844671 | ubuntu-noble | Label: ubuntu-noble 2025-04-30 03:03:02.844689 | ubuntu-noble | Product Name: OpenStack Nova 2025-04-30 03:03:02.844706 | ubuntu-noble | Interface IP: 81.163.193.134 2025-04-30 03:03:02.866276 | 2025-04-30 03:03:02.866393 | TASK [log-inventory : Ensure Zuul Ansible directory exists] 2025-04-30 03:03:03.693459 | ubuntu-noble -> localhost | changed 2025-04-30 03:03:03.701583 | 2025-04-30 03:03:03.701681 | TASK [log-inventory : Copy ansible inventory to logs dir] 2025-04-30 03:03:05.697134 | ubuntu-noble -> localhost | changed 2025-04-30 03:03:05.709028 | 2025-04-30 03:03:05.709122 | TASK [add-build-sshkey : Check to see if ssh key was already created for this build] 2025-04-30 03:03:06.221991 | ubuntu-noble -> localhost | ok 2025-04-30 03:03:06.228615 | 2025-04-30 03:03:06.228713 | TASK [add-build-sshkey : Create a new key in workspace based on build UUID] 2025-04-30 03:03:06.261961 | ubuntu-noble | ok 2025-04-30 03:03:06.288798 | ubuntu-noble | included: /var/lib/zuul/builds/36ac97e7f1904454bb9d2f91f1e23a54/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/create-key-and-replace.yaml 2025-04-30 03:03:06.296071 | 2025-04-30 03:03:06.296151 | TASK [add-build-sshkey : Create Temp SSH key] 2025-04-30 03:03:07.178541 | ubuntu-noble -> localhost | Generating public/private rsa key pair. 2025-04-30 03:03:07.178731 | ubuntu-noble -> localhost | Your identification has been saved in /var/lib/zuul/builds/36ac97e7f1904454bb9d2f91f1e23a54/work/36ac97e7f1904454bb9d2f91f1e23a54_id_rsa 2025-04-30 03:03:07.178762 | ubuntu-noble -> localhost | Your public key has been saved in /var/lib/zuul/builds/36ac97e7f1904454bb9d2f91f1e23a54/work/36ac97e7f1904454bb9d2f91f1e23a54_id_rsa.pub 2025-04-30 03:03:07.178806 | ubuntu-noble -> localhost | The key fingerprint is: 2025-04-30 03:03:07.178827 | ubuntu-noble -> localhost | SHA256:d7DSExsN4WNCU6fUDvMZjw8KGjGIOtBB/QFuaL2+8Qs zuul-build-sshkey 2025-04-30 03:03:07.178845 | ubuntu-noble -> localhost | The key's randomart image is: 2025-04-30 03:03:07.178862 | ubuntu-noble -> localhost | +---[RSA 3072]----+ 2025-04-30 03:03:07.178879 | ubuntu-noble -> localhost | | oo+.o o.=o. | 2025-04-30 03:03:07.178896 | ubuntu-noble -> localhost | |. o+o +. +o=o | 2025-04-30 03:03:07.178913 | ubuntu-noble -> localhost | |..o +. +. O=.= | 2025-04-30 03:03:07.178940 | ubuntu-noble -> localhost | |o. . .o .+ B* . | 2025-04-30 03:03:07.178958 | ubuntu-noble -> localhost | | . . oS.*..o | 2025-04-30 03:03:07.178976 | ubuntu-noble -> localhost | | . . o.o . | 2025-04-30 03:03:07.178997 | ubuntu-noble -> localhost | | E | 2025-04-30 03:03:07.179015 | ubuntu-noble -> localhost | | = | 2025-04-30 03:03:07.179032 | ubuntu-noble -> localhost | | . o. | 2025-04-30 03:03:07.179049 | ubuntu-noble -> localhost | +----[SHA256]-----+ 2025-04-30 03:03:07.179095 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.148451 2025-04-30 03:03:07.195063 | 2025-04-30 03:03:07.195178 | TASK [add-build-sshkey : Remote setup ssh keys (linux)] 2025-04-30 03:03:07.249476 | ubuntu-noble | ok 2025-04-30 03:03:07.269307 | ubuntu-noble | included: /var/lib/zuul/builds/36ac97e7f1904454bb9d2f91f1e23a54/trusted/project_1/opendev.org/zuul/zuul-jobs/roles/add-build-sshkey/tasks/remote-linux.yaml 2025-04-30 03:03:07.287503 | 2025-04-30 03:03:07.293278 | TASK [add-build-sshkey : Remove previously added zuul-build-sshkey] 2025-04-30 03:03:07.345109 | ubuntu-noble | skipping: Conditional result was False 2025-04-30 03:03:07.355105 | 2025-04-30 03:03:07.355210 | TASK [add-build-sshkey : Enable access via build key on all nodes] 2025-04-30 03:03:08.073945 | ubuntu-noble | changed 2025-04-30 03:03:08.079893 | 2025-04-30 03:03:08.079983 | TASK [add-build-sshkey : Make sure user has a .ssh] 2025-04-30 03:03:08.345123 | ubuntu-noble | ok 2025-04-30 03:03:08.351713 | 2025-04-30 03:03:08.351819 | TASK [add-build-sshkey : Install build private key as SSH key on all nodes] 2025-04-30 03:03:09.092614 | ubuntu-noble | changed 2025-04-30 03:03:09.105347 | 2025-04-30 03:03:09.105439 | TASK [add-build-sshkey : Install build public key as SSH key on all nodes] 2025-04-30 03:03:09.847820 | ubuntu-noble | changed 2025-04-30 03:03:09.865815 | 2025-04-30 03:03:09.865927 | TASK [add-build-sshkey : Remote setup ssh keys (windows)] 2025-04-30 03:03:09.899935 | ubuntu-noble | skipping: Conditional result was False 2025-04-30 03:03:09.906784 | 2025-04-30 03:03:09.906877 | TASK [remove-zuul-sshkey : Remove master key from local agent] 2025-04-30 03:03:10.515817 | ubuntu-noble -> localhost | changed 2025-04-30 03:03:10.532334 | 2025-04-30 03:03:10.532472 | TASK [add-build-sshkey : Add back temp key] 2025-04-30 03:03:10.931457 | ubuntu-noble -> localhost | Identity added: /var/lib/zuul/builds/36ac97e7f1904454bb9d2f91f1e23a54/work/36ac97e7f1904454bb9d2f91f1e23a54_id_rsa (zuul-build-sshkey) 2025-04-30 03:03:10.931727 | ubuntu-noble -> localhost | ok: Runtime: 0:00:00.012320 2025-04-30 03:03:10.938551 | 2025-04-30 03:03:10.938645 | TASK [add-build-sshkey : Verify we can still SSH to all nodes] 2025-04-30 03:03:11.361202 | ubuntu-noble | ok 2025-04-30 03:03:11.395371 | 2025-04-30 03:03:11.395458 | TASK [add-build-sshkey : Verify we can still SSH to all nodes (windows)] 2025-04-30 03:03:11.418812 | ubuntu-noble | skipping: Conditional result was False 2025-04-30 03:03:11.429605 | 2025-04-30 03:03:11.429682 | TASK [start-zuul-console : Start zuul_console daemon.] 2025-04-30 03:03:11.863416 | ubuntu-noble | ok 2025-04-30 03:03:11.874384 | 2025-04-30 03:03:11.874469 | TASK [validate-host : Define zuul_info_dir fact] 2025-04-30 03:03:11.903283 | ubuntu-noble | ok 2025-04-30 03:03:11.910763 | 2025-04-30 03:03:11.910844 | TASK [validate-host : Ensure Zuul Ansible directory exists] 2025-04-30 03:03:12.343977 | ubuntu-noble -> localhost | ok 2025-04-30 03:03:12.354862 | 2025-04-30 03:03:12.354951 | TASK [validate-host : Collect information about the host] 2025-04-30 03:03:14.010065 | ubuntu-noble | ok 2025-04-30 03:03:14.037766 | 2025-04-30 03:03:14.037882 | TASK [validate-host : Sanitize hostname] 2025-04-30 03:03:14.149139 | ubuntu-noble | ok 2025-04-30 03:03:14.154087 | 2025-04-30 03:03:14.158004 | TASK [validate-host : Write out all ansible variables/facts known for each host] 2025-04-30 03:03:16.179763 | ubuntu-noble -> localhost | changed 2025-04-30 03:03:16.186715 | 2025-04-30 03:03:16.186806 | TASK [validate-host : Collect information about zuul worker] 2025-04-30 03:03:16.863816 | ubuntu-noble | ok 2025-04-30 03:03:16.878436 | 2025-04-30 03:03:16.878538 | TASK [validate-host : Write out all zuul information for each host] 2025-04-30 03:03:17.879773 | ubuntu-noble -> localhost | changed 2025-04-30 03:03:17.903036 | 2025-04-30 03:03:17.903143 | TASK [prepare-workspace-log : Start zuul_console daemon.] 2025-04-30 03:03:18.216786 | ubuntu-noble | ok 2025-04-30 03:03:18.230793 | 2025-04-30 03:03:18.230899 | TASK [prepare-workspace-log : Synchronize src repos to workspace directory.] 2025-04-30 03:03:19.623833 | ubuntu-noble | changed: 2025-04-30 03:03:19.623989 | ubuntu-noble | cd+++++++++ src/ 2025-04-30 03:03:19.624019 | ubuntu-noble | cd+++++++++ src/github.com/ 2025-04-30 03:03:19.624041 | ubuntu-noble | cd+++++++++ src/github.com/osism/ 2025-04-30 03:03:19.624059 | ubuntu-noble | cd+++++++++ src/github.com/osism/cfg-cookiecutter/ 2025-04-30 03:03:19.624076 | ubuntu-noble | Containerfile 2025-04-30 03:03:19.624185 | ubuntu-noble | 25.1 2025-04-30 03:04:34.927016 | ubuntu-noble | #7 16.31 [notice] To update, run: pip install --upgrade pip 2025-04-30 03:04:34.927047 | ubuntu-noble | #7 17.28 Collecting PyYAML==6.0.2 (from -r /tmp/requirements.txt (line 1)) 2025-04-30 03:04:35.032142 | ubuntu-noble | #7 17.39 Downloading PyYAML-6.0.2-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (2.1 kB) 2025-04-30 03:04:35.138561 | ubuntu-noble | #7 17.48 Collecting ansible==11.5.0 (from -r /tmp/requirements.txt (line 2)) 2025-04-30 03:04:35.380528 | ubuntu-noble | #7 17.49 Downloading ansible-11.5.0-py3-none-any.whl.metadata (8.1 kB) 2025-04-30 03:04:35.380616 | ubuntu-noble | #7 17.53 Collecting click==8.1.8 (from -r /tmp/requirements.txt (line 3)) 2025-04-30 03:04:35.473610 | ubuntu-noble | #7 17.54 Downloading click-8.1.8-py3-none-any.whl.metadata (2.3 kB) 2025-04-30 03:04:35.473672 | ubuntu-noble | #7 17.57 Collecting cookiecutter==2.6.0 (from -r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:35.473680 | ubuntu-noble | #7 17.58 Downloading cookiecutter-2.6.0-py3-none-any.whl.metadata (7.3 kB) 2025-04-30 03:04:35.473697 | ubuntu-noble | #7 17.83 Collecting cryptography==44.0.2 (from -r /tmp/requirements.txt (line 5)) 2025-04-30 03:04:35.610803 | ubuntu-noble | #7 17.84 Downloading cryptography-44.0.2-cp39-abi3-musllinux_1_2_x86_64.whl.metadata (5.7 kB) 2025-04-30 03:04:35.716544 | ubuntu-noble | #7 17.87 Collecting loguru==0.7.3 (from -r /tmp/requirements.txt (line 6)) 2025-04-30 03:04:35.716669 | ubuntu-noble | #7 17.89 Downloading loguru-0.7.3-py3-none-any.whl.metadata (22 kB) 2025-04-30 03:04:35.716685 | ubuntu-noble | #7 17.96 Collecting oslo.utils==8.2.0 (from -r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:35.716713 | ubuntu-noble | #7 17.98 Downloading oslo.utils-8.2.0-py3-none-any.whl.metadata (2.2 kB) 2025-04-30 03:04:35.932654 | ubuntu-noble | #7 18.03 Collecting paramiko==3.5.1 (from -r /tmp/requirements.txt (line 8)) 2025-04-30 03:04:35.932768 | ubuntu-noble | #7 18.04 Downloading paramiko-3.5.1-py3-none-any.whl.metadata (4.6 kB) 2025-04-30 03:04:35.932788 | ubuntu-noble | #7 18.07 Collecting passlib==1.7.4 (from -r /tmp/requirements.txt (line 9)) 2025-04-30 03:04:35.932822 | ubuntu-noble | #7 18.08 Downloading passlib-1.7.4-py2.py3-none-any.whl.metadata (1.7 kB) 2025-04-30 03:04:38.778308 | ubuntu-noble | #7 18.11 Collecting pwgen==0.8.2.post0 (from -r /tmp/requirements.txt (line 10)) 2025-04-30 03:04:38.778415 | ubuntu-noble | #7 18.12 Downloading pwgen-0.8.2.post0.tar.gz (2.9 kB) 2025-04-30 03:04:38.778435 | ubuntu-noble | #7 18.13 Installing build dependencies: started 2025-04-30 03:04:38.778464 | ubuntu-noble | #7 21.13 Installing build dependencies: finished with status 'done' 2025-04-30 03:04:38.930648 | ubuntu-noble | #7 21.13 Getting requirements to build wheel: started 2025-04-30 03:04:39.164168 | ubuntu-noble | #7 21.52 Getting requirements to build wheel: finished with status 'done' 2025-04-30 03:04:39.318294 | ubuntu-noble | #7 21.52 Preparing metadata (pyproject.toml): started 2025-04-30 03:04:39.515393 | ubuntu-noble | #7 21.87 Preparing metadata (pyproject.toml): finished with status 'done' 2025-04-30 03:04:39.630167 | ubuntu-noble | #7 21.98 Collecting pycryptodome==3.22.0 (from -r /tmp/requirements.txt (line 11)) 2025-04-30 03:04:39.879002 | ubuntu-noble | #7 22.00 Downloading pycryptodome-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB) 2025-04-30 03:04:40.010605 | ubuntu-noble | #7 22.03 Collecting pykeepass==4.1.1.post1 (from -r /tmp/requirements.txt (line 12)) 2025-04-30 03:04:40.010720 | ubuntu-noble | #7 22.04 Downloading pykeepass-4.1.1.post1-py3-none-any.whl.metadata (6.6 kB) 2025-04-30 03:04:40.010741 | ubuntu-noble | #7 22.07 Collecting python-gilt==1.2.3 (from -r /tmp/requirements.txt (line 13)) 2025-04-30 03:04:40.010756 | ubuntu-noble | #7 22.08 Downloading python_gilt-1.2.3-py2.py3-none-any.whl.metadata (1.4 kB) 2025-04-30 03:04:40.010809 | ubuntu-noble | #7 22.36 Collecting ruamel.yaml==0.18.10 (from -r /tmp/requirements.txt (line 14)) 2025-04-30 03:04:40.161225 | ubuntu-noble | #7 22.38 Downloading ruamel.yaml-0.18.10-py3-none-any.whl.metadata (23 kB) 2025-04-30 03:04:40.271116 | ubuntu-noble | #7 22.42 Collecting yamllint==1.37.0 (from -r /tmp/requirements.txt (line 15)) 2025-04-30 03:04:40.271222 | ubuntu-noble | #7 22.44 Downloading yamllint-1.37.0-py3-none-any.whl.metadata (4.3 kB) 2025-04-30 03:04:40.271241 | ubuntu-noble | #7 22.51 Collecting ansible-core~=2.18.5 (from ansible==11.5.0->-r /tmp/requirements.txt (line 2)) 2025-04-30 03:04:40.271272 | ubuntu-noble | #7 22.53 Downloading ansible_core-2.18.5-py3-none-any.whl.metadata (7.7 kB) 2025-04-30 03:04:40.384266 | ubuntu-noble | #7 22.55 Collecting binaryornot>=0.4.4 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:40.384355 | ubuntu-noble | #7 22.57 Downloading binaryornot-0.4.4-py2.py3-none-any.whl.metadata (6.0 kB) 2025-04-30 03:04:40.384372 | ubuntu-noble | #7 22.61 Collecting Jinja2<4.0.0,>=2.7 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:40.384386 | ubuntu-noble | #7 22.62 Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB) 2025-04-30 03:04:40.384437 | ubuntu-noble | #7 22.66 Collecting python-slugify>=4.0.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:40.528878 | ubuntu-noble | #7 22.68 Downloading python_slugify-8.0.4-py2.py3-none-any.whl.metadata (8.5 kB) 2025-04-30 03:04:40.528972 | ubuntu-noble | #7 22.74 Collecting requests>=2.23.0 (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:40.529004 | ubuntu-noble | #7 22.75 Downloading requests-2.32.3-py3-none-any.whl.metadata (4.6 kB) 2025-04-30 03:04:40.693907 | ubuntu-noble | #7 22.80 Collecting arrow (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:40.694016 | ubuntu-noble | #7 22.81 Downloading arrow-1.3.0-py3-none-any.whl.metadata (7.5 kB) 2025-04-30 03:04:40.694101 | ubuntu-noble | #7 22.88 Collecting rich (from cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:40.694139 | ubuntu-noble | #7 22.90 Downloading rich-14.0.0-py3-none-any.whl.metadata (18 kB) 2025-04-30 03:04:40.718308 | ubuntu-noble | #7 23.07 Collecting cffi>=1.12 (from cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-04-30 03:04:40.833388 | ubuntu-noble | #7 23.10 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (1.5 kB) 2025-04-30 03:04:40.941745 | ubuntu-noble | #7 23.13 Collecting iso8601>=0.1.11 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:40.942050 | ubuntu-noble | #7 23.15 Downloading iso8601-2.1.0-py3-none-any.whl.metadata (3.7 kB) 2025-04-30 03:04:40.942118 | ubuntu-noble | #7 23.19 Collecting oslo.i18n>=3.15.3 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:40.942151 | ubuntu-noble | #7 23.20 Downloading oslo.i18n-6.5.1-py3-none-any.whl.metadata (2.1 kB) 2025-04-30 03:04:41.077351 | ubuntu-noble | #7 23.24 Collecting netaddr>=0.10.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:41.077473 | ubuntu-noble | #7 23.25 Downloading netaddr-1.3.0-py3-none-any.whl.metadata (5.0 kB) 2025-04-30 03:04:41.077493 | ubuntu-noble | #7 23.30 Collecting debtcollector>=1.2.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:41.077522 | ubuntu-noble | #7 23.31 Downloading debtcollector-3.0.0-py3-none-any.whl.metadata (2.3 kB) 2025-04-30 03:04:41.288091 | ubuntu-noble | #7 23.37 Collecting pyparsing>=2.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:41.288446 | ubuntu-noble | #7 23.39 Downloading pyparsing-3.2.3-py3-none-any.whl.metadata (5.0 kB) 2025-04-30 03:04:41.288541 | ubuntu-noble | #7 23.43 Collecting packaging>=20.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:41.288578 | ubuntu-noble | #7 23.45 Downloading packaging-25.0-py3-none-any.whl.metadata (3.3 kB) 2025-04-30 03:04:41.453834 | ubuntu-noble | #7 23.48 Collecting tzdata>=2022.4 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:41.453923 | ubuntu-noble | #7 23.49 Downloading tzdata-2025.2-py2.py3-none-any.whl.metadata (1.4 kB) 2025-04-30 03:04:41.453937 | ubuntu-noble | #7 23.64 Collecting psutil>=3.2.2 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:41.453961 | ubuntu-noble | #7 23.66 Downloading psutil-7.0.0.tar.gz (497 kB) 2025-04-30 03:04:41.488413 | ubuntu-noble | #7 23.84 Installing build dependencies: started 2025-04-30 03:04:44.300266 | ubuntu-noble | #7 26.65 Installing build dependencies: finished with status 'done' 2025-04-30 03:04:44.454491 | ubuntu-noble | #7 26.66 Getting requirements to build wheel: started 2025-04-30 03:04:44.849575 | ubuntu-noble | #7 27.20 Getting requirements to build wheel: finished with status 'done' 2025-04-30 03:04:45.003695 | ubuntu-noble | #7 27.21 Preparing metadata (pyproject.toml): started 2025-04-30 03:04:45.389471 | ubuntu-noble | #7 27.74 Preparing metadata (pyproject.toml): finished with status 'done' 2025-04-30 03:04:45.539540 | ubuntu-noble | #7 27.81 Collecting pbr>=6.1.0 (from oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:45.645503 | ubuntu-noble | #7 27.83 Downloading pbr-6.1.1-py2.py3-none-any.whl.metadata (3.4 kB) 2025-04-30 03:04:45.645763 | ubuntu-noble | #7 27.89 Collecting bcrypt>=3.2 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-04-30 03:04:45.645801 | ubuntu-noble | #7 27.91 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl.metadata (10 kB) 2025-04-30 03:04:45.746349 | ubuntu-noble | #7 27.96 Collecting pynacl>=1.5 (from paramiko==3.5.1->-r /tmp/requirements.txt (line 8)) 2025-04-30 03:04:45.746433 | ubuntu-noble | #7 27.97 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (8.6 kB) 2025-04-30 03:04:45.746442 | ubuntu-noble | #7 28.00 Collecting pyotp>=2.9.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-30 03:04:45.746460 | ubuntu-noble | #7 28.01 Downloading pyotp-2.9.0-py3-none-any.whl.metadata (9.8 kB) 2025-04-30 03:04:45.857187 | ubuntu-noble | #7 28.04 Collecting construct>=2.10.53 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-30 03:04:45.857286 | ubuntu-noble | #7 28.05 Downloading construct-2.10.70-py3-none-any.whl.metadata (4.2 kB) 2025-04-30 03:04:45.857304 | ubuntu-noble | #7 28.09 Collecting argon2_cffi>=18.1.0 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-30 03:04:45.857347 | ubuntu-noble | #7 28.10 Downloading argon2_cffi-23.1.0-py3-none-any.whl.metadata (5.2 kB) 2025-04-30 03:04:45.857376 | ubuntu-noble | #7 28.21 Collecting pycryptodomex>=3.6.2 (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-30 03:04:46.021394 | ubuntu-noble | #7 28.23 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl.metadata (3.4 kB) 2025-04-30 03:04:46.100333 | ubuntu-noble | #7 28.45 Collecting lxml (from pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-30 03:04:46.214651 | ubuntu-noble | #7 28.47 Downloading lxml-5.4.0-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (3.5 kB) 2025-04-30 03:04:46.325268 | ubuntu-noble | #7 28.50 Collecting colorama (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-30 03:04:46.325372 | ubuntu-noble | #7 28.51 Downloading colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) 2025-04-30 03:04:46.325390 | ubuntu-noble | #7 28.55 Collecting fasteners (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-30 03:04:46.325405 | ubuntu-noble | #7 28.57 Downloading fasteners-0.19-py3-none-any.whl.metadata (4.9 kB) 2025-04-30 03:04:46.325434 | ubuntu-noble | #7 28.61 Collecting sh (from python-gilt==1.2.3->-r /tmp/requirements.txt (line 13)) 2025-04-30 03:04:46.430237 | ubuntu-noble | #7 28.62 Downloading sh-2.2.2-py3-none-any.whl.metadata (3.7 kB) 2025-04-30 03:04:46.430331 | ubuntu-noble | #7 28.68 Collecting ruamel.yaml.clib>=0.2.7 (from ruamel.yaml==0.18.10->-r /tmp/requirements.txt (line 14)) 2025-04-30 03:04:46.430380 | ubuntu-noble | #7 28.69 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl.metadata (2.7 kB) 2025-04-30 03:04:46.532844 | ubuntu-noble | #7 28.72 Collecting pathspec>=0.5.3 (from yamllint==1.37.0->-r /tmp/requirements.txt (line 15)) 2025-04-30 03:04:46.532940 | ubuntu-noble | #7 28.73 Downloading pathspec-0.12.1-py3-none-any.whl.metadata (21 kB) 2025-04-30 03:04:46.532962 | ubuntu-noble | #7 28.77 Collecting resolvelib<1.1.0,>=0.5.3 (from ansible-core~=2.18.5->ansible==11.5.0->-r /tmp/requirements.txt (line 2)) 2025-04-30 03:04:46.532978 | ubuntu-noble | #7 28.78 Downloading resolvelib-1.0.1-py2.py3-none-any.whl.metadata (4.0 kB) 2025-04-30 03:04:46.533003 | ubuntu-noble | #7 28.81 Collecting argon2-cffi-bindings (from argon2_cffi>=18.1.0->pykeepass==4.1.1.post1->-r /tmp/requirements.txt (line 12)) 2025-04-30 03:04:46.717960 | ubuntu-noble | #7 28.83 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl.metadata (6.7 kB) 2025-04-30 03:04:46.718050 | ubuntu-noble | #7 28.87 Collecting chardet>=3.0.2 (from binaryornot>=0.4.4->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:46.718103 | ubuntu-noble | #7 28.89 Downloading chardet-5.2.0-py3-none-any.whl.metadata (3.4 kB) 2025-04-30 03:04:46.718134 | ubuntu-noble | #7 28.92 Collecting pycparser (from cffi>=1.12->cryptography==44.0.2->-r /tmp/requirements.txt (line 5)) 2025-04-30 03:04:46.822783 | ubuntu-noble | #7 28.93 Downloading pycparser-2.22-py3-none-any.whl.metadata (943 bytes) 2025-04-30 03:04:46.822876 | ubuntu-noble | #7 29.07 Collecting wrapt>=1.7.0 (from debtcollector>=1.2.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:46.822905 | ubuntu-noble | #7 29.09 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (6.4 kB) 2025-04-30 03:04:47.020172 | ubuntu-noble | #7 29.16 Collecting MarkupSafe>=2.0 (from Jinja2<4.0.0,>=2.7->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.020276 | ubuntu-noble | #7 29.18 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (4.0 kB) 2025-04-30 03:04:47.020307 | ubuntu-noble | #7 29.37 Collecting setuptools (from pbr>=6.1.0->oslo.utils==8.2.0->-r /tmp/requirements.txt (line 7)) 2025-04-30 03:04:47.196384 | ubuntu-noble | #7 29.39 Downloading setuptools-80.0.1-py3-none-any.whl.metadata (6.5 kB) 2025-04-30 03:04:47.364627 | ubuntu-noble | #7 29.44 Collecting text-unidecode>=1.3 (from python-slugify>=4.0.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.364733 | ubuntu-noble | #7 29.45 Downloading text_unidecode-1.3-py2.py3-none-any.whl.metadata (2.4 kB) 2025-04-30 03:04:47.364754 | ubuntu-noble | #7 29.55 Collecting charset-normalizer<4,>=2 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.364782 | ubuntu-noble | #7 29.56 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl.metadata (35 kB) 2025-04-30 03:04:47.477694 | ubuntu-noble | #7 29.59 Collecting idna<4,>=2.5 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.477760 | ubuntu-noble | #7 29.61 Downloading idna-3.10-py3-none-any.whl.metadata (10 kB) 2025-04-30 03:04:47.477767 | ubuntu-noble | #7 29.72 Collecting urllib3<3,>=1.21.1 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.477782 | ubuntu-noble | #7 29.73 Downloading urllib3-2.4.0-py3-none-any.whl.metadata (6.5 kB) 2025-04-30 03:04:47.577920 | ubuntu-noble | #7 29.78 Collecting certifi>=2017.4.17 (from requests>=2.23.0->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.578011 | ubuntu-noble | #7 29.80 Downloading certifi-2025.4.26-py3-none-any.whl.metadata (2.5 kB) 2025-04-30 03:04:47.578029 | ubuntu-noble | #7 29.83 Collecting python-dateutil>=2.7.0 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.578106 | ubuntu-noble | #7 29.85 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl.metadata (8.4 kB) 2025-04-30 03:04:47.689345 | ubuntu-noble | #7 29.88 Collecting types-python-dateutil>=2.8.10 (from arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.689516 | ubuntu-noble | #7 29.89 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl.metadata (2.1 kB) 2025-04-30 03:04:47.689539 | ubuntu-noble | #7 29.93 Collecting markdown-it-py>=2.2.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.689569 | ubuntu-noble | #7 29.95 Downloading markdown_it_py-3.0.0-py3-none-any.whl.metadata (6.9 kB) 2025-04-30 03:04:47.814492 | ubuntu-noble | #7 29.99 Collecting pygments<3.0.0,>=2.13.0 (from rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.814586 | ubuntu-noble | #7 30.00 Downloading pygments-2.19.1-py3-none-any.whl.metadata (2.5 kB) 2025-04-30 03:04:47.814606 | ubuntu-noble | #7 30.04 Collecting mdurl~=0.1 (from markdown-it-py>=2.2.0->rich->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:47.814636 | ubuntu-noble | #7 30.06 Downloading mdurl-0.1.2-py3-none-any.whl.metadata (1.6 kB) 2025-04-30 03:04:48.018409 | ubuntu-noble | #7 30.09 Collecting six>=1.5 (from python-dateutil>=2.7.0->arrow->cookiecutter==2.6.0->-r /tmp/requirements.txt (line 4)) 2025-04-30 03:04:48.018481 | ubuntu-noble | #7 30.10 Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB) 2025-04-30 03:04:48.018495 | ubuntu-noble | #7 30.17 Downloading PyYAML-6.0.2-cp312-cp312-musllinux_1_1_x86_64.whl (756 kB) 2025-04-30 03:04:48.018517 | ubuntu-noble | #7 30.20 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 756.6/756.6 kB 42.2 MB/s eta 0:00:00 2025-04-30 03:04:49.396408 | ubuntu-noble | #7 30.22 Downloading ansible-11.5.0-py3-none-any.whl (55.5 MB) 2025-04-30 03:04:49.570671 | ubuntu-noble | #7 31.75 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 55.5/55.5 MB 36.4 MB/s eta 0:00:00 2025-04-30 03:04:49.672514 | ubuntu-noble | #7 31.77 Downloading click-8.1.8-py3-none-any.whl (98 kB) 2025-04-30 03:04:49.672604 | ubuntu-noble | #7 31.79 Downloading cookiecutter-2.6.0-py3-none-any.whl (39 kB) 2025-04-30 03:04:49.672625 | ubuntu-noble | #7 31.81 Downloading cryptography-44.0.2-cp39-abi3-musllinux_1_2_x86_64.whl (4.3 MB) 2025-04-30 03:04:49.672658 | ubuntu-noble | #7 31.92 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.3/4.3 MB 37.4 MB/s eta 0:00:00 2025-04-30 03:04:49.789690 | ubuntu-noble | #7 31.94 Downloading loguru-0.7.3-py3-none-any.whl (61 kB) 2025-04-30 03:04:49.789772 | ubuntu-noble | #7 31.97 Downloading oslo.utils-8.2.0-py3-none-any.whl (134 kB) 2025-04-30 03:04:49.789790 | ubuntu-noble | #7 31.99 Downloading paramiko-3.5.1-py3-none-any.whl (227 kB) 2025-04-30 03:04:49.789806 | ubuntu-noble | #7 32.01 Downloading passlib-1.7.4-py2.py3-none-any.whl (525 kB) 2025-04-30 03:04:49.789832 | ubuntu-noble | #7 32.03 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 525.6/525.6 kB 22.6 MB/s eta 0:00:00 2025-04-30 03:04:49.790023 | ubuntu-noble | #7 32.04 Downloading pycryptodome-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-04-30 03:04:49.908589 | ubuntu-noble | #7 32.11 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 35.0 MB/s eta 0:00:00 2025-04-30 03:04:49.908671 | ubuntu-noble | #7 32.12 Downloading pykeepass-4.1.1.post1-py3-none-any.whl (55 kB) 2025-04-30 03:04:49.908691 | ubuntu-noble | #7 32.14 Downloading python_gilt-1.2.3-py2.py3-none-any.whl (22 kB) 2025-04-30 03:04:49.908719 | ubuntu-noble | #7 32.16 Downloading ruamel.yaml-0.18.10-py3-none-any.whl (117 kB) 2025-04-30 03:04:50.008736 | ubuntu-noble | #7 32.18 Downloading yamllint-1.37.0-py3-none-any.whl (68 kB) 2025-04-30 03:04:50.008830 | ubuntu-noble | #7 32.20 Downloading ansible_core-2.18.5-py3-none-any.whl (2.2 MB) 2025-04-30 03:04:50.008861 | ubuntu-noble | #7 32.26 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.2/2.2 MB 36.1 MB/s eta 0:00:00 2025-04-30 03:04:50.141376 | ubuntu-noble | #7 32.28 Downloading argon2_cffi-23.1.0-py3-none-any.whl (15 kB) 2025-04-30 03:04:50.141662 | ubuntu-noble | #7 32.30 Downloading bcrypt-4.3.0-cp39-abi3-musllinux_1_2_x86_64.whl (363 kB) 2025-04-30 03:04:50.141895 | ubuntu-noble | #7 32.32 Downloading binaryornot-0.4.4-py2.py3-none-any.whl (9.0 kB) 2025-04-30 03:04:50.141968 | ubuntu-noble | #7 32.34 Downloading cffi-1.17.1-cp312-cp312-musllinux_1_1_x86_64.whl (488 kB) 2025-04-30 03:04:50.141982 | ubuntu-noble | #7 32.36 Downloading construct-2.10.70-py3-none-any.whl (63 kB) 2025-04-30 03:04:50.142124 | ubuntu-noble | #7 32.38 Downloading debtcollector-3.0.0-py3-none-any.whl (23 kB) 2025-04-30 03:04:50.296114 | ubuntu-noble | #7 32.39 Downloading iso8601-2.1.0-py3-none-any.whl (7.5 kB) 2025-04-30 03:04:50.296203 | ubuntu-noble | #7 32.41 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) 2025-04-30 03:04:50.296221 | ubuntu-noble | #7 32.43 Downloading netaddr-1.3.0-py3-none-any.whl (2.3 MB) 2025-04-30 03:04:50.296252 | ubuntu-noble | #7 32.49 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 37.5 MB/s eta 0:00:00 2025-04-30 03:04:50.396945 | ubuntu-noble | #7 32.51 Downloading oslo.i18n-6.5.1-py3-none-any.whl (46 kB) 2025-04-30 03:04:50.397115 | ubuntu-noble | #7 32.53 Downloading packaging-25.0-py3-none-any.whl (66 kB) 2025-04-30 03:04:50.397142 | ubuntu-noble | #7 32.55 Downloading pathspec-0.12.1-py3-none-any.whl (31 kB) 2025-04-30 03:04:50.397157 | ubuntu-noble | #7 32.57 Downloading pbr-6.1.1-py2.py3-none-any.whl (108 kB) 2025-04-30 03:04:50.397171 | ubuntu-noble | #7 32.59 Downloading pycryptodomex-3.22.0-cp37-abi3-musllinux_1_2_x86_64.whl (2.3 MB) 2025-04-30 03:04:50.397200 | ubuntu-noble | #7 32.65 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 38.8 MB/s eta 0:00:00 2025-04-30 03:04:50.512805 | ubuntu-noble | #7 32.67 Downloading PyNaCl-1.5.0-cp36-abi3-musllinux_1_1_x86_64.whl (1.1 MB) 2025-04-30 03:04:50.512951 | ubuntu-noble | #7 32.70 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 37.6 MB/s eta 0:00:00 2025-04-30 03:04:50.512993 | ubuntu-noble | #7 32.72 Downloading pyotp-2.9.0-py3-none-any.whl (13 kB) 2025-04-30 03:04:50.513007 | ubuntu-noble | #7 32.73 Downloading pyparsing-3.2.3-py3-none-any.whl (111 kB) 2025-04-30 03:04:50.513020 | ubuntu-noble | #7 32.75 Downloading python_slugify-8.0.4-py2.py3-none-any.whl (10 kB) 2025-04-30 03:04:50.513045 | ubuntu-noble | #7 32.77 Downloading requests-2.32.3-py3-none-any.whl (64 kB) 2025-04-30 03:04:50.673501 | ubuntu-noble | #7 32.78 Downloading ruamel.yaml.clib-0.2.12-cp312-cp312-musllinux_1_1_x86_64.whl (745 kB) 2025-04-30 03:04:50.673585 | ubuntu-noble | #7 32.81 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 745.8/745.8 kB 36.2 MB/s eta 0:00:00 2025-04-30 03:04:50.673605 | ubuntu-noble | #7 32.83 Downloading tzdata-2025.2-py2.py3-none-any.whl (347 kB) 2025-04-30 03:04:50.673620 | ubuntu-noble | #7 32.85 Downloading arrow-1.3.0-py3-none-any.whl (66 kB) 2025-04-30 03:04:50.673634 | ubuntu-noble | #7 32.87 Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB) 2025-04-30 03:04:50.673661 | ubuntu-noble | #7 32.88 Downloading fasteners-0.19-py3-none-any.whl (18 kB) 2025-04-30 03:04:50.782316 | ubuntu-noble | #7 32.90 Downloading lxml-5.4.0-cp312-cp312-musllinux_1_2_x86_64.whl (5.0 MB) 2025-04-30 03:04:50.782606 | ubuntu-noble | #7 33.03 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.0/5.0 MB 40.6 MB/s eta 0:00:00 2025-04-30 03:04:50.884837 | ubuntu-noble | #7 33.04 Downloading rich-14.0.0-py3-none-any.whl (243 kB) 2025-04-30 03:04:50.885094 | ubuntu-noble | #7 33.06 Downloading sh-2.2.2-py3-none-any.whl (38 kB) 2025-04-30 03:04:50.885126 | ubuntu-noble | #7 33.08 Downloading certifi-2025.4.26-py3-none-any.whl (159 kB) 2025-04-30 03:04:50.885142 | ubuntu-noble | #7 33.10 Downloading chardet-5.2.0-py3-none-any.whl (199 kB) 2025-04-30 03:04:50.885155 | ubuntu-noble | #7 33.12 Downloading charset_normalizer-3.4.1-cp312-cp312-musllinux_1_2_x86_64.whl (146 kB) 2025-04-30 03:04:50.885169 | ubuntu-noble | #7 33.14 Downloading idna-3.10-py3-none-any.whl (70 kB) 2025-04-30 03:04:50.885196 | ubuntu-noble | #7 33.15 Downloading markdown_it_py-3.0.0-py3-none-any.whl (87 kB) 2025-04-30 03:04:50.990696 | ubuntu-noble | #7 33.17 Downloading MarkupSafe-3.0.2-cp312-cp312-musllinux_1_2_x86_64.whl (23 kB) 2025-04-30 03:04:50.990841 | ubuntu-noble | #7 33.19 Downloading pygments-2.19.1-py3-none-any.whl (1.2 MB) 2025-04-30 03:04:50.990862 | ubuntu-noble | #7 33.22 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 38.4 MB/s eta 0:00:00 2025-04-30 03:04:50.990877 | ubuntu-noble | #7 33.24 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl (229 kB) 2025-04-30 03:04:50.990944 | ubuntu-noble | #7 33.26 Downloading resolvelib-1.0.1-py2.py3-none-any.whl (17 kB) 2025-04-30 03:04:51.092428 | ubuntu-noble | #7 33.27 Downloading text_unidecode-1.3-py2.py3-none-any.whl (78 kB) 2025-04-30 03:04:51.092492 | ubuntu-noble | #7 33.29 Downloading types_python_dateutil-2.9.0.20241206-py3-none-any.whl (14 kB) 2025-04-30 03:04:51.092499 | ubuntu-noble | #7 33.31 Downloading urllib3-2.4.0-py3-none-any.whl (128 kB) 2025-04-30 03:04:51.092505 | ubuntu-noble | #7 33.33 Downloading wrapt-1.17.2-cp312-cp312-musllinux_1_2_x86_64.whl (87 kB) 2025-04-30 03:04:51.092510 | ubuntu-noble | #7 33.34 Downloading argon2_cffi_bindings-21.2.0-cp36-abi3-musllinux_1_1_x86_64.whl (88 kB) 2025-04-30 03:04:51.092521 | ubuntu-noble | #7 33.36 Downloading pycparser-2.22-py3-none-any.whl (117 kB) 2025-04-30 03:04:51.622308 | ubuntu-noble | #7 33.38 Downloading setuptools-80.0.1-py3-none-any.whl (1.2 MB) 2025-04-30 03:04:51.622539 | ubuntu-noble | #7 33.41 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 36.5 MB/s eta 0:00:00 2025-04-30 03:04:51.622562 | ubuntu-noble | #7 33.43 Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) 2025-04-30 03:04:51.622577 | ubuntu-noble | #7 33.45 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB) 2025-04-30 03:04:51.622623 | ubuntu-noble | #7 33.98 Building wheels for collected packages: pwgen, psutil 2025-04-30 03:04:51.773844 | ubuntu-noble | #7 33.98 Building wheel for pwgen (pyproject.toml): started 2025-04-30 03:04:51.993285 | ubuntu-noble | #7 34.35 Building wheel for pwgen (pyproject.toml): finished with status 'done' 2025-04-30 03:04:52.156286 | ubuntu-noble | #7 34.35 Created wheel for pwgen: filename=pwgen-0.8.2.post0-py3-none-any.whl size=3795 sha256=e6ec7eca64e100427cb959ed6ba9c730d70bf891ed7cebba87cb42c7980aa55d 2025-04-30 03:04:54.738465 | ubuntu-noble | #7 34.35 Stored in directory: /tmp/pip-ephem-wheel-cache-gb5wnwme/wheels/8e/56/bf/a88cd4e5b84752858d6db0c914d636211570e8a1e73b53b5dd 2025-04-30 03:04:54.738516 | ubuntu-noble | #7 34.36 Building wheel for psutil (pyproject.toml): started 2025-04-30 03:04:54.738530 | ubuntu-noble | #7 37.09 Building wheel for psutil (pyproject.toml): finished with status 'done' 2025-04-30 03:04:54.904302 | ubuntu-noble | #7 37.10 Created wheel for psutil: filename=psutil-7.0.0-cp36-abi3-linux_x86_64.whl size=277230 sha256=f52776352cd11be4a97ee387ba4fc9d64eb0cc3c34ca7d6f294feda07f519df2 2025-04-30 03:04:55.227307 | ubuntu-noble | #7 37.10 Stored in directory: /tmp/pip-ephem-wheel-cache-gb5wnwme/wheels/0c/58/48/ccefe23b905f1dd76f8444f328ff2cfb1d4920a081f9d5d03d 2025-04-30 03:04:55.227415 | ubuntu-noble | #7 37.11 Successfully built pwgen psutil 2025-04-30 03:04:55.227453 | ubuntu-noble | #7 37.58 Installing collected packages: text-unidecode, resolvelib, pwgen, passlib, wrapt, urllib3, tzdata, types-python-dateutil, six, sh, setuptools, ruamel.yaml.clib, PyYAML, python-slugify, pyparsing, pyotp, pygments, pycryptodomex, pycryptodome, pycparser, psutil, pathspec, packaging, netaddr, mdurl, MarkupSafe, lxml, loguru, iso8601, idna, fasteners, construct, colorama, click, charset-normalizer, chardet, certifi, bcrypt, yamllint, ruamel.yaml, requests, python-gilt, python-dateutil, pbr, markdown-it-py, Jinja2, debtcollector, cffi, binaryornot, rich, pynacl, oslo.i18n, cryptography, arrow, argon2-cffi-bindings, paramiko, oslo.utils, cookiecutter, argon2_cffi, ansible-core, pykeepass, ansible 2025-04-30 03:05:47.012621 | ubuntu-noble | #7 89.37 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning. 2025-04-30 03:05:47.136417 | ubuntu-noble | #7 89.37 Successfully installed Jinja2-3.1.6 MarkupSafe-3.0.2 PyYAML-6.0.2 ansible-11.5.0 ansible-core-2.18.5 argon2-cffi-bindings-21.2.0 argon2_cffi-23.1.0 arrow-1.3.0 bcrypt-4.3.0 binaryornot-0.4.4 certifi-2025.4.26 cffi-1.17.1 chardet-5.2.0 charset-normalizer-3.4.1 click-8.1.8 colorama-0.4.6 construct-2.10.70 cookiecutter-2.6.0 cryptography-44.0.2 debtcollector-3.0.0 fasteners-0.19 idna-3.10 iso8601-2.1.0 loguru-0.7.3 lxml-5.4.0 markdown-it-py-3.0.0 mdurl-0.1.2 netaddr-1.3.0 oslo.i18n-6.5.1 oslo.utils-8.2.0 packaging-25.0 paramiko-3.5.1 passlib-1.7.4 pathspec-0.12.1 pbr-6.1.1 psutil-7.0.0 pwgen-0.8.2.post0 pycparser-2.22 pycryptodome-3.22.0 pycryptodomex-3.22.0 pygments-2.19.1 pykeepass-4.1.1.post1 pynacl-1.5.0 pyotp-2.9.0 pyparsing-3.2.3 python-dateutil-2.9.0.post0 python-gilt-1.2.3 python-slugify-8.0.4 requests-2.32.3 resolvelib-1.0.1 rich-14.0.0 ruamel.yaml-0.18.10 ruamel.yaml.clib-0.2.12 setuptools-80.0.1 sh-2.2.2 six-1.17.0 text-unidecode-1.3 types-python-dateutil-2.9.0.20241206 tzdata-2025.2 urllib3-2.4.0 wrapt-1.17.2 yamllint-1.37.0 2025-04-30 03:05:47.363984 | ubuntu-noble | #7 89.49 2025-04-30 03:05:47.364029 | ubuntu-noble | #7 89.49 [notice] A new release of pip is available: 25.0.1 -> 25.1 2025-04-30 03:05:47.364037 | ubuntu-noble | #7 89.49 [notice] To update, run: pip install --upgrade pip 2025-04-30 03:05:47.364050 | ubuntu-noble | #7 89.72 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/main: No such file or directory 2025-04-30 03:05:47.471714 | ubuntu-noble | #7 89.72 WARNING: opening from cache https://dl-cdn.alpinelinux.org/alpine/v3.21/community: No such file or directory 2025-04-30 03:05:47.471790 | ubuntu-noble | #7 89.72 (1/36) Purging .build-deps (20250430.030420) 2025-04-30 03:05:47.471822 | ubuntu-noble | #7 89.72 (2/36) Purging build-base (0.5-r3) 2025-04-30 03:05:47.576876 | ubuntu-noble | #7 89.72 (3/36) Purging file (5.46-r2) 2025-04-30 03:05:47.576972 | ubuntu-noble | #7 89.72 (4/36) Purging g++ (14.2.0-r4) 2025-04-30 03:05:47.577020 | ubuntu-noble | #7 89.73 (5/36) Purging libstdc++-dev (14.2.0-r4) 2025-04-30 03:05:47.577039 | ubuntu-noble | #7 89.75 (6/36) Purging make (4.4.1-r2) 2025-04-30 03:05:47.577089 | ubuntu-noble | #7 89.75 (7/36) Purging fortify-headers (1.1-r5) 2025-04-30 03:05:47.577109 | ubuntu-noble | #7 89.75 (8/36) Purging patch (2.7.6-r10) 2025-04-30 03:05:47.577125 | ubuntu-noble | #7 89.75 (9/36) Purging cargo (1.83.0-r0) 2025-04-30 03:05:47.577140 | ubuntu-noble | #7 89.75 (10/36) Purging libffi-dev (3.4.7-r0) 2025-04-30 03:05:47.577155 | ubuntu-noble | #7 89.75 (11/36) Purging linux-headers (6.6-r1) 2025-04-30 03:05:47.577171 | ubuntu-noble | #7 89.77 (12/36) Purging openssl-dev (3.3.3-r0) 2025-04-30 03:05:47.577186 | ubuntu-noble | #7 89.78 (13/36) Purging python3-dev (3.12.10-r0) 2025-04-30 03:05:47.577201 | ubuntu-noble | #7 89.79 (14/36) Purging python3-pyc (3.12.10-r0) 2025-04-30 03:05:47.577461 | ubuntu-noble | #7 89.79 (15/36) Purging python3-pycache-pyc0 (3.12.10-r0) 2025-04-30 03:05:47.577509 | ubuntu-noble | #7 89.81 (16/36) Purging pyc (3.12.10-r0) 2025-04-30 03:05:47.577527 | ubuntu-noble | #7 89.81 (17/36) Purging python3 (3.12.10-r0) 2025-04-30 03:05:47.577544 | ubuntu-noble | #7 89.83 (18/36) Purging rust (1.83.0-r0) 2025-04-30 03:05:47.577572 | ubuntu-noble | #7 89.85 (19/36) Purging gcc (14.2.0-r4) 2025-04-30 03:05:47.734797 | ubuntu-noble | #7 89.89 (20/36) Purging binutils (2.43.1-r2) 2025-04-30 03:05:47.734865 | ubuntu-noble | #7 89.90 (21/36) Purging libatomic (14.2.0-r4) 2025-04-30 03:05:47.734880 | ubuntu-noble | #7 89.90 (22/36) Purging libgomp (14.2.0-r4) 2025-04-30 03:05:47.734912 | ubuntu-noble | #7 89.90 (23/36) Purging musl-dev (1.2.5-r9) 2025-04-30 03:05:47.734923 | ubuntu-noble | #7 89.90 (24/36) Purging isl26 (0.26-r1) 2025-04-30 03:05:47.734933 | ubuntu-noble | #7 89.90 (25/36) Purging jansson (2.14-r4) 2025-04-30 03:05:47.734942 | ubuntu-noble | #7 89.90 (26/36) Purging libmagic (5.46-r2) 2025-04-30 03:05:47.734952 | ubuntu-noble | #7 89.91 (27/36) Purging llvm19-libs (19.1.4-r1) 2025-04-30 03:05:47.734962 | ubuntu-noble | #7 89.93 (28/36) Purging mpc1 (1.3.1-r1) 2025-04-30 03:05:47.734971 | ubuntu-noble | #7 89.93 (29/36) Purging mpdecimal (4.0.0-r0) 2025-04-30 03:05:47.734981 | ubuntu-noble | #7 89.93 (30/36) Purging mpfr4 (4.2.1-r0) 2025-04-30 03:05:47.735210 | ubuntu-noble | #7 89.93 (31/36) Purging pkgconf (2.3.0-r0) 2025-04-30 03:05:47.931264 | ubuntu-noble | #7 89.93 (32/36) Purging scudo-malloc (19.1.4-r0) 2025-04-30 03:05:47.931381 | ubuntu-noble | #7 89.93 (33/36) Purging gmp (6.3.0-r2) 2025-04-30 03:05:47.931403 | ubuntu-noble | #7 89.93 (34/36) Purging libstdc++ (14.2.0-r4) 2025-04-30 03:05:47.931420 | ubuntu-noble | #7 89.93 (35/36) Purging libgcc (14.2.0-r4) 2025-04-30 03:05:47.931435 | ubuntu-noble | #7 89.93 (36/36) Purging libxml2 (2.13.4-r5) 2025-04-30 03:05:47.931451 | ubuntu-noble | #7 89.93 Executing busybox-1.37.0-r12.trigger 2025-04-30 03:05:47.931466 | ubuntu-noble | #7 89.94 OK: 26 MiB in 52 packages 2025-04-30 03:05:47.931496 | ubuntu-noble | #7 DONE 90.3s 2025-04-30 03:05:48.086483 | ubuntu-noble | 2025-04-30 03:05:48.138827 | ubuntu-noble | #8 [4/5] COPY . /data 2025-04-30 03:05:48.138893 | ubuntu-noble | #8 DONE 0.2s 2025-04-30 03:05:48.368845 | ubuntu-noble | 2025-04-30 03:05:55.366705 | ubuntu-noble | #9 [5/5] WORKDIR /data 2025-04-30 03:05:55.366773 | ubuntu-noble | #9 DONE 0.1s 2025-04-30 03:05:55.366781 | ubuntu-noble | 2025-04-30 03:05:55.366788 | ubuntu-noble | #10 exporting to image 2025-04-30 03:05:55.366793 | ubuntu-noble | #10 exporting layers 2025-04-30 03:05:55.366809 | ubuntu-noble | #10 exporting layers 7.1s done 2025-04-30 03:05:55.535569 | ubuntu-noble | #10 writing image sha256:ad385a61416be8d2643c9b50c16efa816e22cc749fcb3e430cd93854f3aff73d done 2025-04-30 03:05:55.543994 | ubuntu-noble | #10 naming to docker.io/library/fa970b8 done 2025-04-30 03:05:55.544398 | ubuntu-noble | #10 DONE 7.2s 2025-04-30 03:05:55.610092 | ubuntu-noble | changed 2025-04-30 03:05:55.626952 | 2025-04-30 03:05:55.627094 | TASK [Run push script] 2025-04-30 03:05:55.967698 | ubuntu-noble | ++ git rev-parse --short HEAD 2025-04-30 03:05:55.969217 | ubuntu-noble | + revision=fa970b8 2025-04-30 03:05:55.969235 | ubuntu-noble | + [[ -n osism.harbor.regio.digital ]] 2025-04-30 03:05:55.969244 | ubuntu-noble | + repository=osism.harbor.regio.digital/osism/cookiecutter 2025-04-30 03:05:55.970075 | ubuntu-noble | + docker tag fa970b8 osism.harbor.regio.digital/osism/cookiecutter:latest 2025-04-30 03:05:56.002408 | ubuntu-noble | + docker push osism.harbor.regio.digital/osism/cookiecutter:latest 2025-04-30 03:05:56.027485 | ubuntu-noble | The push refers to repository [osism.harbor.regio.digital/osism/cookiecutter] 2025-04-30 03:05:56.062340 | ubuntu-noble | 5f70bf18a086: Preparing 2025-04-30 03:05:57.033244 | ubuntu-noble | 3f44a496cb67: Preparing 2025-04-30 03:05:57.033319 | ubuntu-noble | 85be2226139a: Preparing 2025-04-30 03:05:57.033330 | ubuntu-noble | 05e531447b83: Preparing 2025-04-30 03:05:57.033341 | ubuntu-noble | c5f83227c988: Preparing 2025-04-30 03:05:57.033350 | ubuntu-noble | 5a73889e102c: Preparing 2025-04-30 03:05:57.033358 | ubuntu-noble | 2748e349efd5: Preparing 2025-04-30 03:05:57.033366 | ubuntu-noble | 08000c18d16d: Preparing 2025-04-30 03:05:57.033373 | ubuntu-noble | 5a73889e102c: Waiting 2025-04-30 03:05:57.033382 | ubuntu-noble | 2748e349efd5: Waiting 2025-04-30 03:05:57.033390 | ubuntu-noble | 08000c18d16d: Waiting 2025-04-30 03:05:57.033420 | ubuntu-noble | c5f83227c988: Layer already exists 2025-04-30 03:05:57.833881 | ubuntu-noble | 5a73889e102c: Layer already exists 2025-04-30 03:05:58.647896 | ubuntu-noble | 2748e349efd5: Layer already exists 2025-04-30 03:05:59.005504 | ubuntu-noble | 08000c18d16d: Layer already exists 2025-04-30 03:06:01.340178 | ubuntu-noble | 05e531447b83: Pushed 2025-04-30 03:06:01.707962 | ubuntu-noble | 3f44a496cb67: Pushed 2025-04-30 03:06:02.358338 | ubuntu-noble | 5f70bf18a086: Pushed 2025-04-30 03:06:36.276831 | ubuntu-noble | 85be2226139a: Pushed 2025-04-30 03:06:42.260527 | ubuntu-noble | latest: digest: sha256:59d08620156adb42f3d12a527361814978888e7e2bd2523ab6c347a50d3026ad size: 1993 2025-04-30 03:06:42.699849 | ubuntu-noble | changed 2025-04-30 03:06:42.725574 | 2025-04-30 03:06:42.725672 | PLAY RECAP 2025-04-30 03:06:42.725726 | ubuntu-noble | ok: 3 changed: 3 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-04-30 03:06:42.725753 | 2025-04-30 03:06:42.855251 | RUN END RESULT_NORMAL: [untrusted : github.com/osism/cfg-cookiecutter/playbooks/build.yml@main] 2025-04-30 03:06:42.858322 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-04-30 03:06:43.638933 | 2025-04-30 03:06:43.639052 | PLAY [Base post] 2025-04-30 03:06:43.667338 | 2025-04-30 03:06:43.667460 | TASK [remove-build-sshkey : Remove the build SSH key from all nodes] 2025-04-30 03:06:44.470244 | ubuntu-noble | changed 2025-04-30 03:06:44.535090 | 2025-04-30 03:06:44.535200 | PLAY RECAP 2025-04-30 03:06:44.535259 | ubuntu-noble | ok: 1 changed: 1 unreachable: 0 failed: 0 skipped: 0 rescued: 0 ignored: 0 2025-04-30 03:06:44.535321 | 2025-04-30 03:06:44.710712 | POST-RUN END RESULT_NORMAL: [trusted : github.com/osism/zuul-config/playbooks/base/post.yaml@main] 2025-04-30 03:06:44.713725 | POST-RUN START: [trusted : github.com/osism/zuul-config/playbooks/base/post-logs.yaml@main] 2025-04-30 03:06:45.625691 | 2025-04-30 03:06:45.625881 | PLAY [Base post-logs] 2025-04-30 03:06:45.659841 | 2025-04-30 03:06:45.660041 | TASK [generate-zuul-manifest : Generate Zuul manifest] 2025-04-30 03:06:46.210832 | localhost | changed 2025-04-30 03:06:46.215152 | 2025-04-30 03:06:46.215303 | TASK [generate-zuul-manifest : Return Zuul manifest URL to Zuul] 2025-04-30 03:06:46.296811 | localhost | ok 2025-04-30 03:06:46.305087 | 2025-04-30 03:06:46.305216 | TASK [Set zuul-log-path fact] 2025-04-30 03:06:46.359605 | localhost | ok 2025-04-30 03:06:46.377673 | 2025-04-30 03:06:46.377809 | TASK [set-zuul-log-path-fact : Set log path for a build] 2025-04-30 03:06:46.442396 | localhost | ok 2025-04-30 03:06:46.451533 | 2025-04-30 03:06:46.451663 | TASK [upload-logs : Create log directories] 2025-04-30 03:06:47.563667 | localhost | changed 2025-04-30 03:06:47.568768 | 2025-04-30 03:06:47.568874 | TASK [upload-logs : Ensure logs are readable before uploading] 2025-04-30 03:06:48.270133 | localhost -> localhost | ok: Runtime: 0:00:00.028010 2025-04-30 03:06:48.276765 | 2025-04-30 03:06:48.276876 | TASK [upload-logs : Upload logs to log server] 2025-04-30 03:06:49.111952 | localhost | Output suppressed because no_log was given 2025-04-30 03:06:49.115389 | 2025-04-30 03:06:49.115492 | LOOP [upload-logs : Compress console log and json output] 2025-04-30 03:06:49.271088 | localhost | skipping: Conditional result was False 2025-04-30 03:06:49.300563 | localhost | skipping: Conditional result was False 2025-04-30 03:06:49.305811 | 2025-04-30 03:06:49.305930 | LOOP [upload-logs : Upload compressed console log and json output] 2025-04-30 03:06:49.436873 | localhost | skipping: Conditional result was False 2025-04-30 03:06:49.437198 | 2025-04-30 03:06:49.470902 | localhost | skipping: Conditional result was False 2025-04-30 03:06:49.476566 | 2025-04-30 03:06:49.476940 | LOOP [upload-logs : Upload console log and json output]